Search content
Sort by
Showing 20 of 34 results by azher91
Re: [ANN][VOT]: VoteCoin - a new era of anonymous crypto democracy
Equihash CryptoMena Mining Pools
http://znomp.cryptomena.io
Why mine with us?
We are miners from the middle east, eu server is currently up while middle east node is being worked on, low latency, great hashrate, low fees and better income
Mining Pools:-
Votecoin [VOT]
More to be added.
Connect your rigs here:-
stratum+tcp://znomp.cryptomena.io:3072
Configuration Eg:-
--server znomp.cryptomena.io --port 3072 --user t1MfJT76WH56snnWazNtUcPUb5WqBuDqWts.$rigName --pass x
Discord Channel for Support & Qs:-
https://discord.gg/DS3NNEa
Re: [ANN] [BTCP] BitcoinPrivate: A Truly Private Bitcoin [Equihash]
Any ETA on the Electrum wallet?
might take 10 days id say
https://www.parallelminer.com/wp-content/uploads/2016/07/12GPUPSUKIT-3.jpg
Can you make something that would fit this PSU?
I need a 8 gpu rig case.
with shipment to Bahrain.
Can you make something that would fit this PSU?
I need a 8 gpu rig case.
with shipment to Bahrain.
Re: [ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.
I need to ask how the payment transfers work, if someone can help me with this, i had 0.057 in my wallet on mining pool hub, now i needed to transfer only 0.054 to my wallet on advanced cash,
the amount set was 0.057, how much commission does mining pool hub take on btc transactions? 0.03?
the amount set was 0.057, how much commission does mining pool hub take on btc transactions? 0.03?
When exactly does this occur? If it's running on full load (For example while mining) and the fan stops working, it could end badly for your GPU. Do you have any monitoring software installed? If not, try using MSI Afterburner, set the fans to Auto, check if it happens again, could be an issue with the drivers perhaps?
Since it's a new GPU, you could also send an email to the manufacturer, it's possible that the fan's pins (They control the fan's spinning speed) are not working as they should.
Since it's a new GPU, you could also send an email to the manufacturer, it's possible that the fan's pins (They control the fan's spinning speed) are not working as they should.
Occurs at times when the i restart the rig, i am running smos, so im note sure about the drivers on linux, i will try to email the manufacturer to see what they can do
Do the fans spin freely by hand all the time when they are stopped? Any grating or squealing noises from them? If so, the bearings might be seized or need a drop of oil. If that is the case, sewing machine oil works. Just one or two small drops.
No sorta noise tho, any guide where the bearing is? or how do i put it
ill check if they spin freely
How will I be able to get it?
what do you mean?
I have a 1060 6gb ITX Aero Card, the card has that option that fans stop spinning when under temp is 60, the card is fine but sometimes on linux, i notice the temperature that it reaches 80 to 90c, as the fan didnt start spinning automatically, so i have to go spin it by hand or reboot the rig, any solution, the card cant be returned and its a new card and the only card with samsung memory lol
Hello there, I have a 1060 rig
Core Clock = 0
Power Draw = 80w
total pwr draw = 550w inc motherboard, psu
Fans = 65
1x Samsung Memory +1700 = 24.6mhs
4x Micron Memory +1300 = 23 Mhs
1x Hynix Memory +600 = 18 mhs
Now my question is, will OC'ing this high will have an effect on the life span of the cards, i dont care about 3 to 5mhs as long as my card works fine in the long run, cant be bothered one right it burning down lol
Core Clock = 0
Power Draw = 80w
total pwr draw = 550w inc motherboard, psu
Fans = 65
1x Samsung Memory +1700 = 24.6mhs
4x Micron Memory +1300 = 23 Mhs
1x Hynix Memory +600 = 18 mhs
Now my question is, will OC'ing this high will have an effect on the life span of the cards, i dont care about 3 to 5mhs as long as my card works fine in the long run, cant be bothered one right it burning down lol
Hi guys, the question still lies lol
Hello there, I have a 1060 rig
Core Clock = 0
Power Draw = 80w
total pwr draw = 550w inc motherboard, psu
Fans = 65
1x Samsung Memory +1700 = 24.6mhs
4x Micron Memory +1300 = 23 Mhs
1x Hynix Memory +600 = 18 mhs
Now my question is, will OC'ing this high will have an effect on the life span of the cards, i dont care about 3 to 5mhs as long as my card works fine in the long run, cant be bothered one right it burning down lol
Core Clock = 0
Power Draw = 80w
total pwr draw = 550w inc motherboard, psu
Fans = 65
1x Samsung Memory +1700 = 24.6mhs
4x Micron Memory +1300 = 23 Mhs
1x Hynix Memory +600 = 18 mhs
Now my question is, will OC'ing this high will have an effect on the life span of the cards, i dont care about 3 to 5mhs as long as my card works fine in the long run, cant be bothered one right it burning down lol
Hello everyone, so i finally completed my RIG, thanks to all of you for your help, i need to know about overclocking on simplemining, i have 6x1060(6gb)
I
1 of them has a Samsung Memory (22mhs on ethereum while i was getting 25 on Win10)
1 is Hynix Memory (22 on linux, same thing on Win10)
4 of them is Micron Memory (22 MHS on linux while 24.5 on win10)
The reason why i came back to simplemining OS that its pretty simple and less bullshit.
I have a Biostar Tb85, so if someone call tell me about bios undervolting aswell,
would be cool
Thank you.
I
1 of them has a Samsung Memory (22mhs on ethereum while i was getting 25 on Win10)
1 is Hynix Memory (22 on linux, same thing on Win10)
4 of them is Micron Memory (22 MHS on linux while 24.5 on win10)
The reason why i came back to simplemining OS that its pretty simple and less bullshit.
I have a Biostar Tb85, so if someone call tell me about bios undervolting aswell,
would be cool
Thank you.
Hi there, i ordered all of the stuff, i need to make good rig frame or wood preferable,
i have 6 1060 cards, any one with measurements can help, an hp 1200w server psu and a biostar tb85 mobo
can someone guide, thank you
i have 6 1060 cards, any one with measurements can help, an hp 1200w server psu and a biostar tb85 mobo
can someone guide, thank you
I tried the shorting mod but the error is still there ( Windows has stopped this device because it has reported problems. (Code 43) ), I also reinstalled all the driver. I guess the 1x is really limited in this MB
Did you get it to work in the end?