Search content
Sort by
Showing 20 of 67 results by bakra
Re: [BOUNTY] Wispr.tech - REVOLUTIONIZING COMMUNICATION - 1.000.000 WSP | $200.000
Telegram username: @Arthur_Fonzarelli
Telegram display name: Fonzie (Theo Wils) www.wispr.tech
Telegram bio: www.wispr.tech
WSP address: WjJRThoS7g65MnXbWDgRfMsDiwnHyBqx3j
Telegram display name: Fonzie (Theo Wils) www.wispr.tech
Telegram bio: www.wispr.tech
WSP address: WjJRThoS7g65MnXbWDgRfMsDiwnHyBqx3j
i have enough coins for an MN , is there an windows wallet ??
Windows wallet doesn't work
Can someone please explain to me what these columns in the masternode tab of the wallet mean:
"Rank", and what does it mean when it's negative?
"Active", does "0" mean it is not active? And if so, how comes it is still in the list?
"Active (secs)", what does it mean when this value is negative?
"Rank", and what does it mean when it's negative?
"Active", does "0" mean it is not active? And if so, how comes it is still in the list?
"Active (secs)", what does it mean when this value is negative?
Re: [BOUNTY] Wispr.tech - REVOLUTIONIZING COMMUNICATION - 1.000.000 WSP | $200.000
Telegram username: @WebfinityDesign
Telegram display name:Theo Wils www.wispr.tech
Telegram bio:www.wispr.tech
WSP address: WjJRThoS7g65MnXbWDgRfMsDiwnHyBqx3j
Telegram display name:Theo Wils www.wispr.tech
Telegram bio:www.wispr.tech
WSP address: WjJRThoS7g65MnXbWDgRfMsDiwnHyBqx3j
Quote
Any suggestions how to see what is going wrong?
Quote
Issue `masternode list` from time to time to see if all your masternodes are present on the list.
After starting them they all appear in masternode-list, but after some time some of them disappear. Most of the time already the same day.
What if you manually re-run start-many? Do they return? If so, the dirty mitigation is to run this command within an infinite loop (with some reasonable delay to avoid useless processing).
Also how much time is there between activating and the first payout? Can it be they are activated but I have to wait a certain time before payout starts? Or is it totally random?
The strange thing is I don't see MN4 in the masternode list, but it did pay out yesterday and today.
from my observation the MNs work despite they are not shown in the whole masternode list.
That's true. I just received a reward from one of the masternodes that was not in the list anymore
Quote
Any suggestions how to see what is going wrong?
Quote
Issue `masternode list` from time to time to see if all your masternodes are present on the list.
After starting them they all appear in masternode-list, but after some time some of them disappear. Most of the time already the same day.
What if you manually re-run start-many? Do they return? If so, the dirty mitigation is to run this command within an infinite loop (with some reasonable delay to avoid useless processing).
Also how much time is there between activating and the first payout? Can it be they are activated but I have to wait a certain time before payout starts? Or is it totally random?
The strange thing is I don't see MN4 in the masternode list, but it did pay out yesterday and today.
But since 4 days MN2 payed 4 times, MN1 payed once and the other two didn't pay at all.
Any suggestions how to see what is going wrong?
Issue `masternode list` from time to time to see if all your masternodes are present on the list.Any suggestions how to see what is going wrong?
After starting them they all appear in masternode-list, but after some time some of them disappear. Most of the time already the same day.
I have one wallet controlling multiple masternodes.
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Do you use that wallet only for controlling masternodes (start/stop etc), or also for running them? In other words, do all your masternodes use a single (the same) datadir, and do you run just single instance of 8bitd daemon opening multiple TCP ports (one per MN)?
On the vps they have their own datadir. Up untill now the local wallets had their own datadir as well. As that uses too much resources I compiled a wallet that can control multiple masternodes from one wallet.
I have to see if it works as expected because I set it up yesterday for one wallet to test. Did not receive rewards yet. If it works I'm going to control the other wallets on the vps from the same local wallet
Ok, thanks for clearing this up! I was wondering if there is a way to run multiple masternodes using just a single hot wallet. I was trying to figure that out few years back and found it is impossible, so your previous message confused me a bit.
The setup you have now - multiple hot wallets for MN (with 0 coins sitting there), and a single cold wallet (with all the coins) controlling the MNs - is exactly what I was using back then - and it worked perfectly, so yours should work too if everything is correct.
How to see from which hot wallet the rewards are coming? All incoming rewards have the same name so how can I see that all MN's are paying rewards?
Well, as far as I remember, the rewards are payed to the masternode collateral address. So you could check your masternode collateral address balances, and see if they are bigger than 112, and by how much...
I got 4 MN's on the vps and 1 controller wallet.
When, in the controller wallet I type " masternode start-many" I get the following reply:

{
"overall" : "Successfully started 4 masternodes, failed to start 0, total 4",
"detail" : {
"status" : {
"alias" : "MN8BIT1",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT2",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT3",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT4",
"result" : "succesful"
}
}
}
But since 4 days MN2 payed 4 times, MN1 payed once and the other two didn't pay at all.
Any suggestions how to see what is going wrong?
Are all the MN's working on the same machine? If they are on different network segments, it is possible some staking wallets do see them, others don't.
In any case this has to do with propagation of the masternode info inside the 8bit network. As far as I could see, this is random, so running MN on current 8bit network is kind of a gamble.
The dev may have deeper insight though.
In any case I just hope the new codebase will be out soon. The existing one is tricky, whimsical and unpredictable, and I personally like it for being such
. But I know not everyone likes it that way, so new codebase could make things more fair and more predictable...
MN1, MN2 and MN3 are running on one vps, MN4 is running on another one.
Before they all had they're own controlling wallet and where paying out all 4 of them.
After trying to control all 4 with one controlling wallet this trouble started.
After starting them they all appear in masternode-list, but after some time some of them disappear.
Will they propagate after waiting some time or won't they at all?
Is there a way to get them all properly propagated on the 8bit network?
I have one wallet controlling multiple masternodes.
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Do you use that wallet only for controlling masternodes (start/stop etc), or also for running them? In other words, do all your masternodes use a single (the same) datadir, and do you run just single instance of 8bitd daemon opening multiple TCP ports (one per MN)?
On the vps they have their own datadir. Up untill now the local wallets had their own datadir as well. As that uses too much resources I compiled a wallet that can control multiple masternodes from one wallet.
I have to see if it works as expected because I set it up yesterday for one wallet to test. Did not receive rewards yet. If it works I'm going to control the other wallets on the vps from the same local wallet
Ok, thanks for clearing this up! I was wondering if there is a way to run multiple masternodes using just a single hot wallet. I was trying to figure that out few years back and found it is impossible, so your previous message confused me a bit.
The setup you have now - multiple hot wallets for MN (with 0 coins sitting there), and a single cold wallet (with all the coins) controlling the MNs - is exactly what I was using back then - and it worked perfectly, so yours should work too if everything is correct.
How to see from which hot wallet the rewards are coming? All incoming rewards have the same name so how can I see that all MN's are paying rewards?
Well, as far as I remember, the rewards are payed to the masternode collateral address. So you could check your masternode collateral address balances, and see if they are bigger than 112, and by how much...
I got 4 MN's on the vps and 1 controller wallet.
When, in the controller wallet I type " masternode start-many" I get the following reply:

{
"overall" : "Successfully started 4 masternodes, failed to start 0, total 4",
"detail" : {
"status" : {
"alias" : "MN8BIT1",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT2",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT3",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT4",
"result" : "succesful"
}
}
}
But since 4 days MN2 payed 4 times, MN1 payed once and the other two didn't pay at all.
Any suggestions how to see what is going wrong?
When I restart my masternode will it be at the bottom of the list for paying reward again?
When it doesn't payout I restart it, but I'm wondering if that will be wise or that it will go back to the end of the row for paying again
When it doesn't payout I restart it, but I'm wondering if that will be wise or that it will go back to the end of the row for paying again
I would like to setup more than one masternode with only one wallet (only one time 112 8bit).
Question 1: Is it possible ?
If yes,
Question 2: Do I have to compile a modified version of my wallet ?
Question 3: Could you please give me informations on how can I do it ? Or give me a link ?
Thx
Question 1: Is it possible ?
If yes,
Question 2: Do I have to compile a modified version of my wallet ?
Question 3: Could you please give me informations on how can I do it ? Or give me a link ?
Thx
You can try this one: https://bitcointalk.org/index.php?topic=1028119.msg20238850;topicseen#msg20238850
I know there is one more solution here were you have to modify another file but I can't find it now.
I have one wallet controlling multiple masternodes.
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Do you use that wallet only for controlling masternodes (start/stop etc), or also for running them? In other words, do all your masternodes use a single (the same) datadir, and do you run just single instance of 8bitd daemon opening multiple TCP ports (one per MN)?
On the vps they have their own datadir. Up untill now the local wallets had their own datadir as well. As that uses too much resources I compiled a wallet that can control multiple masternodes from one wallet.
I have to see if it works as expected because I set it up yesterday for one wallet to test. Did not receive rewards yet. If it works I'm going to control the other wallets on the vps from the same local wallet
Ok, thanks for clearing this up! I was wondering if there is a way to run multiple masternodes using just a single hot wallet. I was trying to figure that out few years back and found it is impossible, so your previous message confused me a bit.
The setup you have now - multiple hot wallets for MN (with 0 coins sitting there), and a single cold wallet (with all the coins) controlling the MNs - is exactly what I was using back then - and it worked perfectly, so yours should work too if everything is correct.
How to see from which hot wallet the rewards are coming? All incoming rewards have the same name so how can I see that all MN's are paying rewards?
Well, as far as I remember, the rewards are payed to the masternode collateral address. So you could check your masternode collateral address balances, and see if they are bigger than 112, and by how much...
Thanks, that way I can see it indeed. One of them has still only the 112 coins but no incoming transactions.
The other one has 112 coins + incoming transactions.
When I start it I get:
{
"overall" : "Successfully started 2 masternodes, failed to start 0, total 2",
"detail" : {
"status" : {
"alias" : "MN8BIT1",
"result" : "succesful"
},
"status" : {
"alias" : "MN8BIT2",
"result" : "succesful"
}
}
}
So I think it should work.
I will see if anything have changed tomorrow now I started it again
I have one wallet controlling multiple masternodes.
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Do you use that wallet only for controlling masternodes (start/stop etc), or also for running them? In other words, do all your masternodes use a single (the same) datadir, and do you run just single instance of 8bitd daemon opening multiple TCP ports (one per MN)?
On the vps they have their own datadir. Up untill now the local wallets had their own datadir as well. As that uses too much resources I compiled a wallet that can control multiple masternodes from one wallet.
I have to see if it works as expected because I set it up yesterday for one wallet to test. Did not receive rewards yet. If it works I'm going to control the other wallets on the vps from the same local wallet
Ok, thanks for clearing this up! I was wondering if there is a way to run multiple masternodes using just a single hot wallet. I was trying to figure that out few years back and found it is impossible, so your previous message confused me a bit.
The setup you have now - multiple hot wallets for MN (with 0 coins sitting there), and a single cold wallet (with all the coins) controlling the MNs - is exactly what I was using back then - and it worked perfectly, so yours should work too if everything is correct.
How to see from which hot wallet the rewards are coming? All incoming rewards have the same name so how can I see that all MN's are paying rewards?
I have one controlling wallet for multiple masternodes.
How do I know all masternodes are running?
The only thing I see is incoming rewards but how to tell from which masternode they come?
How do I know all masternodes are running?
The only thing I see is incoming rewards but how to tell from which masternode they come?
Re: 🔴HADRON🔴⠀WEB⠀BROWSER⠀AI⠀MINING🔴 Mining⠀starting⠀apply⠀now,⠀AIRDRP⠀bount🔴
I like to see how this is working on my machines:
i7 3770k
16 GB Ram
Ubuntu 17.04 64 bit
Brave browser, Firefox and Chrome
Samsung Note 3 with Android 5
Browsers:
Brave, Firefox and Chrome
Laptop Dell Inspiron dual boot with Windows 10 64 bit / Ubuntu 17.10 64 bit
Browsers:
Brave, Firefox, Chrome and Internet explorer
Laptop Acer Aspire with Ubuntu 17.10 64 bit
Browsers:
Brave, Firefox and Chrome
i7 3770k
16 GB Ram
Ubuntu 17.04 64 bit
Brave browser, Firefox and Chrome
Samsung Note 3 with Android 5
Browsers:
Brave, Firefox and Chrome
Laptop Dell Inspiron dual boot with Windows 10 64 bit / Ubuntu 17.10 64 bit
Browsers:
Brave, Firefox, Chrome and Internet explorer
Laptop Acer Aspire with Ubuntu 17.10 64 bit
Browsers:
Brave, Firefox and Chrome
I have one wallet controlling multiple masternodes.
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Can I use this wallet for staking as well or do I need a separate wallet for staking?
Do you use that wallet only for controlling masternodes (start/stop etc), or also for running them? In other words, do all your masternodes use a single (the same) datadir, and do you run just single instance of 8bitd daemon opening multiple TCP ports (one per MN)?
On the vps they have their own datadir. Up untill now the local wallets had their own datadir as well. As that uses too much resources I compiled a wallet that can control multiple masternodes from one wallet.
I have to see if it works as expected because I set it up yesterday for one wallet to test. Did not receive rewards yet. If it works I'm going to control the other wallets on the vps from the same local wallet
I have one wallet controlling multiple masternodes.
Can I use this wallet for staking as well or do I need a separate wallet for staking?
You have to patch the client first so 112-inputs will be not collected for staking. I could write one, but I am focused on the new code base (which will eventually allow to stake on a masternode).Can I use this wallet for staking as well or do I need a separate wallet for staking?
Then I will keep a separate one for staking and wait for the new wallet