Ninjastic
Search content
Sort by
Showing 20 of 225 results by bategojko74
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.7b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 19/08/2021, 09:44:09 UTC
Quote from: UnclWish on Today at 09:25:21 AM
What about -clgreen 1 ? Why my RX 580 8Gb ignores it? Latest 21.8.1 driver.
-clgreen 1 is currently not supported. Why would you like to trade higher hashrate for lower power consumption and lower hashrate at the current ETH prices?
Post
Topic
Board Mining (Altcoins)
Merits 2 from 1 user
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 19/08/2021, 09:11:03 UTC
⭐ Merited by xandry (2)
Quote from: speed07 on Today at 01:56:56 AM
Quote from: bategojko74 on August 18, 2021, 09:55:09 PM

Quote
maybe due to driver?, i find st in this topic https://github.com/ethereum-mining/ethminer/issues/1966
From 19.X.X till now all amd gpu drivers support 8gb single memory allocation. You can try installing other driver but your chances are little.
oh, tk u
FIXED: You were right for the driver. Install driver 20.7.1 or later and you will be able to run -clKernel 3. It seems that 8GB allocation is introduced in 20.5.1 or 20.7.1 driver. I have installed 20.4.2 driver on my computer and got the same message as you "clKernel 3 is ignored", and my "Max allocation size" went down to 4244635648.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 18/08/2021, 21:55:09 UTC

Quote
maybe due to driver?, i find st in this topic https://github.com/ethereum-mining/ethminer/issues/1966
From 19.X.X till now all amd gpu drivers support 8gb single memory allocation. You can try installing other driver but your chances are little.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 18/08/2021, 08:59:47 UTC
Quote from: speed07 on August 17, 2021, 09:35:08 AM
Quote from: bategojko74 on August 17, 2021, 06:50:17 AM
Quote from: speed07 on August 09, 2021, 02:27:28 AM
Quote from: bategojko74 on August 09, 2021, 02:25:32 AM
Quote from: speed07 on August 08, 2021, 08:59:17 AM
Quote from: bategojko74 on August 08, 2021, 06:21:32 AM
Quote from: dazmann on August 07, 2021, 09:59:42 PM
Quote from: dazmann on August 07, 2021, 04:24:07 AM
Quote from: bategojko74 on August 06, 2021, 03:21:38 PM
Quote from: dazmann on August 04, 2021, 04:47:02 PM
Quote from: PhoenixMiner on August 04, 2021, 05:59:24 AM

  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused

Please let us know if you have any problems or questions related to PhoenixMiner 5.7b.

Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2.
I'm on windows 10 20H2, Radeon Software version 21.6.1
I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion.
Everything else is default.
Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings.

Thank you very much. I will look into that.

Aaaand nothing changed.
If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs.
The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios.
You are using very old drivers. Update the amd gpu driver.
which version bro? im using 20.4.2

Increase your VRAM to (NUMBER_OF_GPUS+1)*8 GB. If you print the beginning of your log file I will tell you why clkernel 3 is ignored.

Code:
2021.08.04:19:05:12.583: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.04:19:05:12.583: main Cmd line:
2021.08.04:19:05:12.583: main config.txt: -pool asia1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo -amd -acm -tt 54 -clKernel 3 -fanmin 52 -fanmax 58 -cclock 1170 -cvddc 830 -mclock *:2040,1:2010,3:2020 -mvddc *:830,1:840 -mi 13 -rxboost 1 -straps 1 -mt 1
2021.08.04:19:05:14.338: main OpenCL driver version: 20.4.x
2021.08.04:19:05:14.366: main Available GPUs for mining:
2021.08.04:19:05:14.366: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.367: main ADL library initialized
2021.08.04:19:05:15.671: main Eth: the pool list contains 2 pools (2 from command-line)
2021.08.04:19:05:15.671: main Eth: primary pool: asia1.ethermine.org:4444
2021.08.04:19:05:15.671: main Starting GPU mining
2021.08.04:19:05:15.671: main Matched GPU1 to ADL adapter index 32 (method 1)
2021.08.04:19:05:15.699: main GPU1: AMD driver 20.4.2
2021.08.04:19:05:15.699: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2021.08.04:19:05:15.699: main GPU1: using AMD driver ver 20.4.2
2021.08.04:19:05:15.700: main Matched GPU2 to ADL adapter index 0 (method 1)
2021.08.04:19:05:15.728: main GPU2: AMD driver 20.4.2
2021.08.04:19:05:15.728: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2021.08.04:19:05:15.728: main GPU2: using AMD driver ver 20.4.2
2021.08.04:19:05:15.728: main Matched GPU3 to ADL adapter index 16 (method 1)
2021.08.04:19:05:15.759: main GPU3: AMD driver 20.4.2
2021.08.04:19:05:15.759: main GPU3: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2021.08.04:19:05:15.759: main GPU3: using AMD driver ver 20.4.2
2021.08.04:19:05:15.759: main Matched GPU4 to ADL adapter index 24 (method 1)
2021.08.04:19:05:15.789: main GPU4: AMD driver 20.4.2
2021.08.04:19:05:15.789: main GPU4: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2021.08.04:19:05:15.789: main GPU4: using AMD driver ver 20.4.2
2021.08.04:19:05:15.789: main Matched GPU5 to ADL adapter index 8 (method 1)
2021.08.04:19:05:15.819: main GPU5: AMD driver 20.4.2
2021.08.04:19:05:15.819: main GPU5: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2021.08.04:19:05:15.820: main GPU5: using AMD driver ver 20.4.2
2021.08.04:19:05:15.820: main Matched GPU6 to ADL adapter index 40 (method 1)
2021.08.04:19:05:15.849: main GPU6: AMD driver 20.4.2
2021.08.04:19:05:15.849: main GPU6: Created ADL monitor for adapter 40; overdrive version: 7 (7)
2021.08.04:19:05:15.849: main GPU6: using AMD driver ver 20.4.2
2021.08.04:19:05:15.913: hwmc GPU1: set VMEM timing level to 1
2021.08.04:19:05:16.023: hwmc GPU2: set VMEM timing level to 1
2021.08.04:19:05:16.129: hwmc GPU3: set VMEM timing level to 1
2021.08.04:19:05:16.236: hwmc GPU4: set VMEM timing level to 1
2021.08.04:19:05:16.342: hwmc GPU5: set VMEM timing level to 1
2021.08.04:19:05:16.448: hwmc GPU6: set VMEM timing level to 1
2021.08.04:19:05:16.599: hwmc GPU1: switching to alt fan control mode
2021.08.04:19:05:16.600: hwmc GPU1: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.606: hwmc GPU1: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.633: hwmc GPU1: set VMEM clocks to 2010 MHz (Vddc 840 mV)
2021.08.04:19:05:16.633: hwmc GPU2: switching to alt fan control mode
2021.08.04:19:05:16.634: hwmc GPU2: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.640: hwmc GPU2: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.647: hwmc GPU2: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.648: hwmc GPU3: switching to alt fan control mode
2021.08.04:19:05:16.648: hwmc GPU3: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.654: hwmc GPU3: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.659: hwmc GPU3: set VMEM clocks to 2020 MHz (Vddc 830 mV)
2021.08.04:19:05:16.661: hwmc GPU4: switching to alt fan control mode
2021.08.04:19:05:16.662: hwmc GPU4: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.670: hwmc GPU4: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.675: hwmc GPU4: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.676: hwmc GPU5: switching to alt fan control mode
2021.08.04:19:05:16.677: hwmc GPU5: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.688: hwmc GPU5: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU5: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU6: switching to alt fan control mode
2021.08.04:19:05:16.695: hwmc GPU6: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.703: hwmc GPU6: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.708: hwmc GPU6: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.759: wdog Starting watchdog thread
2021.08.04:19:05:16.759: main Eth: Connecting to ethash pool asia1.ethermine.org:4444 (proto: EthProxy)
2021.08.04:19:05:16.761: main GPU1: 53C 17% 33W, GPU2: 49C 17% 32W, GPU3: 50C 17% 33W, GPU4: 49C 17% 32W, GPU5: 51C 17% 33W, GPU6: 53C 17% 32W
GPUs power: 193.6 W
2021.08.04:19:05:16.823: eths Eth: Connected to ethash pool asia1.ethermine.org:4444 (172.65.231.156)
2021.08.04:19:05:16.823: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo"]}

2021.08.04:19:05:16.896: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2021.08.04:19:05:16.896: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2021.08.04:19:05:16.963: main Listening for CDM remote manager at port 3333 in read-only mode
2021.08.04:19:05:16.964: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd35ad1ac3a8d6c52be021ff0788f6e18cb76f3ea6d9163b36ad8c5efcfeff249","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:16.964: eths Eth: New job #d35ad1ac from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:16.965: GPU1 GPU1: Starting up... (0)
2021.08.04:19:05:16.965: GPU1 GPU1: Generating ethash light cache for epoch #431
2021.08.04:19:05:16.967: GPU2 GPU2: Starting up... (0)
2021.08.04:19:05:16.969: GPU3 GPU3: Starting up... (0)
2021.08.04:19:05:16.971: GPU4 GPU4: Starting up... (0)
2021.08.04:19:05:16.974: GPU5 GPU5: Starting up... (0)
2021.08.04:19:05:16.976: GPU6 GPU6: Starting up... (0)
2021.08.04:19:05:18.374: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xae9ee9fadfbbbe9ecbfd293fb52dce24bff17a37d3640b710c138cdb0101f143","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:18.374: eths Eth: New job #ae9ee9fa from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:21.326: GPU1 Light cache generated in 4.4 s (16.0 MB/s)
2021.08.04:19:05:21.677: GPU1 The option -clKernel 3 is ignored for GPU1
2021.08.04:19:05:21.796: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.08.04:19:05:21.796: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
2021.08.04:19:05:22.237: GPU1 GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:22.237: GPU1 GPU1: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:22.319: GPU1 GPU1: Generating DAG for epoch #431
2021.08.04:19:05:22.635: GPU2 The option -clKernel 3 is ignored for GPU2
2021.08.04:19:05:23.188: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:23.188: GPU2 GPU2: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:23.250: GPU2 GPU2: Generating DAG for epoch #431
2021.08.04:19:05:23.586: GPU3 The option -clKernel 3 is ignored for GPU3
2021.08.04:19:05:24.138: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:24.138: GPU3 GPU3: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:24.201: GPU3 GPU3: Generating DAG for epoch #431
2021.08.04:19:05:24.248: GPU1 GPU1: DAG  15%
2021.08.04:19:05:24.372: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6bb4a5dea15afce537ac20b510f4f3bc817a663979e5df9c6728ef647c953a59","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:24.372: eths Eth: New job #6bb4a5de from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:24.560: GPU4 The option -clKernel 3 is ignored for GPU4
2021.08.04:19:05:25.110: GPU4 GPU4: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:25.110: GPU4 GPU4: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:25.174: GPU4 GPU4: Generating DAG for epoch #431
2021.08.04:19:05:25.202: GPU2 GPU2: DAG  15%
2021.08.04:19:05:25.514: GPU5 The option -clKernel 3 is ignored for GPU5
2021.08.04:19:05:25.783: GPU1 GPU1: DAG  30%
2021.08.04:19:05:26.075: GPU5 GPU5: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:26.075: GPU5 GPU5: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:26.135: GPU3 GPU3: DAG  15%
2021.08.04:19:05:26.142: GPU5 GPU5: Generating DAG for epoch #431
2021.08.04:19:05:26.477: GPU6 The option -clKernel 3 is ignored for GPU6
Sorry, you can't run -clKernel 3. Your GPUs are some weird model that can't allocate more than 4GB per single memory block.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 17/08/2021, 16:03:18 UTC
Quote from: speed07 on Today at 09:35:08 AM
Quote from: bategojko74 on Today at 06:50:17 AM
Quote from: speed07 on August 09, 2021, 02:27:28 AM
Quote from: bategojko74 on August 09, 2021, 02:25:32 AM
Quote from: speed07 on August 08, 2021, 08:59:17 AM
Quote from: bategojko74 on August 08, 2021, 06:21:32 AM
Quote from: dazmann on August 07, 2021, 09:59:42 PM
Quote from: dazmann on August 07, 2021, 04:24:07 AM
Quote from: bategojko74 on August 06, 2021, 03:21:38 PM
Quote from: dazmann on August 04, 2021, 04:47:02 PM
Quote from: PhoenixMiner on August 04, 2021, 05:59:24 AM

  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused

Please let us know if you have any problems or questions related to PhoenixMiner 5.7b.

Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2.
I'm on windows 10 20H2, Radeon Software version 21.6.1
I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion.
Everything else is default.
Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings.

Thank you very much. I will look into that.

Aaaand nothing changed.
If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs.
The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios.
You are using very old drivers. Update the amd gpu driver.
which version bro? im using 20.4.2

Increase your VRAM to (NUMBER_OF_GPUS+1)*8 GB. If you print the beginning of your log file I will tell you why clkernel 3 is ignored.

Code:
2021.08.04:19:05:12.583: main Phoenix Miner 5.7b Windows/msvc - Release build
2021.08.04:19:05:12.583: main Cmd line:
2021.08.04:19:05:12.583: main config.txt: -pool asia1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal 0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo -amd -acm -tt 54 -clKernel 3 -fanmin 52 -fanmax 58 -cclock 1170 -cvddc 830 -mclock *:2040,1:2010,3:2020 -mvddc *:830,1:840 -mi 13 -rxboost 1 -straps 1 -mt 1
2021.08.04:19:05:14.338: main OpenCL driver version: 20.4.x
2021.08.04:19:05:14.366: main Available GPUs for mining:
2021.08.04:19:05:14.366: main GPU1: Radeon RX 570 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU2: Radeon RX 570 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU3: Radeon RX 570 Series (pcie 3), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU4: Radeon RX 570 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU5: Radeon RX 570 Series (pcie 5), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.366: main GPU6: Radeon RX 570 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 32 CUs
2021.08.04:19:05:14.367: main ADL library initialized
2021.08.04:19:05:15.671: main Eth: the pool list contains 2 pools (2 from command-line)
2021.08.04:19:05:15.671: main Eth: primary pool: asia1.ethermine.org:4444
2021.08.04:19:05:15.671: main Starting GPU mining
2021.08.04:19:05:15.671: main Matched GPU1 to ADL adapter index 32 (method 1)
2021.08.04:19:05:15.699: main GPU1: AMD driver 20.4.2
2021.08.04:19:05:15.699: main GPU1: Created ADL monitor for adapter 32; overdrive version: 7 (7)
2021.08.04:19:05:15.699: main GPU1: using AMD driver ver 20.4.2
2021.08.04:19:05:15.700: main Matched GPU2 to ADL adapter index 0 (method 1)
2021.08.04:19:05:15.728: main GPU2: AMD driver 20.4.2
2021.08.04:19:05:15.728: main GPU2: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2021.08.04:19:05:15.728: main GPU2: using AMD driver ver 20.4.2
2021.08.04:19:05:15.728: main Matched GPU3 to ADL adapter index 16 (method 1)
2021.08.04:19:05:15.759: main GPU3: AMD driver 20.4.2
2021.08.04:19:05:15.759: main GPU3: Created ADL monitor for adapter 16; overdrive version: 7 (7)
2021.08.04:19:05:15.759: main GPU3: using AMD driver ver 20.4.2
2021.08.04:19:05:15.759: main Matched GPU4 to ADL adapter index 24 (method 1)
2021.08.04:19:05:15.789: main GPU4: AMD driver 20.4.2
2021.08.04:19:05:15.789: main GPU4: Created ADL monitor for adapter 24; overdrive version: 7 (7)
2021.08.04:19:05:15.789: main GPU4: using AMD driver ver 20.4.2
2021.08.04:19:05:15.789: main Matched GPU5 to ADL adapter index 8 (method 1)
2021.08.04:19:05:15.819: main GPU5: AMD driver 20.4.2
2021.08.04:19:05:15.819: main GPU5: Created ADL monitor for adapter 8; overdrive version: 7 (7)
2021.08.04:19:05:15.820: main GPU5: using AMD driver ver 20.4.2
2021.08.04:19:05:15.820: main Matched GPU6 to ADL adapter index 40 (method 1)
2021.08.04:19:05:15.849: main GPU6: AMD driver 20.4.2
2021.08.04:19:05:15.849: main GPU6: Created ADL monitor for adapter 40; overdrive version: 7 (7)
2021.08.04:19:05:15.849: main GPU6: using AMD driver ver 20.4.2
2021.08.04:19:05:15.913: hwmc GPU1: set VMEM timing level to 1
2021.08.04:19:05:16.023: hwmc GPU2: set VMEM timing level to 1
2021.08.04:19:05:16.129: hwmc GPU3: set VMEM timing level to 1
2021.08.04:19:05:16.236: hwmc GPU4: set VMEM timing level to 1
2021.08.04:19:05:16.342: hwmc GPU5: set VMEM timing level to 1
2021.08.04:19:05:16.448: hwmc GPU6: set VMEM timing level to 1
2021.08.04:19:05:16.599: hwmc GPU1: switching to alt fan control mode
2021.08.04:19:05:16.600: hwmc GPU1: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.606: hwmc GPU1: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.633: hwmc GPU1: set VMEM clocks to 2010 MHz (Vddc 840 mV)
2021.08.04:19:05:16.633: hwmc GPU2: switching to alt fan control mode
2021.08.04:19:05:16.634: hwmc GPU2: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.640: hwmc GPU2: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.647: hwmc GPU2: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.648: hwmc GPU3: switching to alt fan control mode
2021.08.04:19:05:16.648: hwmc GPU3: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.654: hwmc GPU3: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.659: hwmc GPU3: set VMEM clocks to 2020 MHz (Vddc 830 mV)
2021.08.04:19:05:16.661: hwmc GPU4: switching to alt fan control mode
2021.08.04:19:05:16.662: hwmc GPU4: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.670: hwmc GPU4: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.675: hwmc GPU4: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.676: hwmc GPU5: switching to alt fan control mode
2021.08.04:19:05:16.677: hwmc GPU5: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.688: hwmc GPU5: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU5: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.694: hwmc GPU6: switching to alt fan control mode
2021.08.04:19:05:16.695: hwmc GPU6: set auto fan: 54C target temp (min fan 52, max fan 58)
2021.08.04:19:05:16.703: hwmc GPU6: set GPU clocks to 1170 MHz (Vddc 830 mV)
2021.08.04:19:05:16.708: hwmc GPU6: set VMEM clocks to 2040 MHz (Vddc 830 mV)
2021.08.04:19:05:16.759: wdog Starting watchdog thread
2021.08.04:19:05:16.759: main Eth: Connecting to ethash pool asia1.ethermine.org:4444 (proto: EthProxy)
2021.08.04:19:05:16.761: main GPU1: 53C 17% 33W, GPU2: 49C 17% 32W, GPU3: 50C 17% 33W, GPU4: 49C 17% 32W, GPU5: 51C 17% 33W, GPU6: 53C 17% 32W
GPUs power: 193.6 W
2021.08.04:19:05:16.823: eths Eth: Connected to ethash pool asia1.ethermine.org:4444 (172.65.231.156)
2021.08.04:19:05:16.823: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x67503b7b1833688167eec36fee017bf3cf6e1c79.bo"]}

2021.08.04:19:05:16.896: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2021.08.04:19:05:16.896: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2021.08.04:19:05:16.963: main Listening for CDM remote manager at port 3333 in read-only mode
2021.08.04:19:05:16.964: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xd35ad1ac3a8d6c52be021ff0788f6e18cb76f3ea6d9163b36ad8c5efcfeff249","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:16.964: eths Eth: New job #d35ad1ac from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:16.965: GPU1 GPU1: Starting up... (0)
2021.08.04:19:05:16.965: GPU1 GPU1: Generating ethash light cache for epoch #431
2021.08.04:19:05:16.967: GPU2 GPU2: Starting up... (0)
2021.08.04:19:05:16.969: GPU3 GPU3: Starting up... (0)
2021.08.04:19:05:16.971: GPU4 GPU4: Starting up... (0)
2021.08.04:19:05:16.974: GPU5 GPU5: Starting up... (0)
2021.08.04:19:05:16.976: GPU6 GPU6: Starting up... (0)
2021.08.04:19:05:18.374: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xae9ee9fadfbbbe9ecbfd293fb52dce24bff17a37d3640b710c138cdb0101f143","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:18.374: eths Eth: New job #ae9ee9fa from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:21.326: GPU1 Light cache generated in 4.4 s (16.0 MB/s)
2021.08.04:19:05:21.677: GPU1 The option -clKernel 3 is ignored for GPU1
2021.08.04:19:05:21.796: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2021.08.04:19:05:21.796: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)
2021.08.04:19:05:22.237: GPU1 GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:22.237: GPU1 GPU1: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:22.319: GPU1 GPU1: Generating DAG for epoch #431
2021.08.04:19:05:22.635: GPU2 The option -clKernel 3 is ignored for GPU2
2021.08.04:19:05:23.188: GPU2 GPU2: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:23.188: GPU2 GPU2: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:23.250: GPU2 GPU2: Generating DAG for epoch #431
2021.08.04:19:05:23.586: GPU3 The option -clKernel 3 is ignored for GPU3
2021.08.04:19:05:24.138: GPU3 GPU3: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:24.138: GPU3 GPU3: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:24.201: GPU3 GPU3: Generating DAG for epoch #431
2021.08.04:19:05:24.248: GPU1 GPU1: DAG  15%
2021.08.04:19:05:24.372: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6bb4a5dea15afce537ac20b510f4f3bc817a663979e5df9c6728ef647c953a59","0x787fc048d668f524ffd65484f99d9e60a25cfa3e5e8254f111e6b7968f195e9c","0x00000000ffff00000000ffff00000000ffff00000000ffff00000000ffff0000","0xc5bb4b"]}
2021.08.04:19:05:24.372: eths Eth: New job #6bb4a5de from asia1.ethermine.org:4444; diff: 4295MH
2021.08.04:19:05:24.560: GPU4 The option -clKernel 3 is ignored for GPU4
2021.08.04:19:05:25.110: GPU4 GPU4: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:25.110: GPU4 GPU4: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:25.174: GPU4 GPU4: Generating DAG for epoch #431
2021.08.04:19:05:25.202: GPU2 GPU2: DAG  15%
2021.08.04:19:05:25.514: GPU5 The option -clKernel 3 is ignored for GPU5
2021.08.04:19:05:25.783: GPU1 GPU1: DAG  30%
2021.08.04:19:05:26.075: GPU5 GPU5: Free VRAM: 7.948 GB; used: 0.052 GB
2021.08.04:19:05:26.075: GPU5 GPU5: Allocating DAG (4.38 GB); good for epoch up to #433
2021.08.04:19:05:26.135: GPU3 GPU3: DAG  15%
2021.08.04:19:05:26.142: GPU5 GPU5: Generating DAG for epoch #431
2021.08.04:19:05:26.477: GPU6 The option -clKernel 3 is ignored for GPU6
Try -clkernel 3 with all letters lowercase
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 17/08/2021, 06:50:17 UTC
Quote from: speed07 on August 09, 2021, 02:27:28 AM
Quote from: bategojko74 on August 09, 2021, 02:25:32 AM
Quote from: speed07 on August 08, 2021, 08:59:17 AM
Quote from: bategojko74 on August 08, 2021, 06:21:32 AM
Quote from: dazmann on August 07, 2021, 09:59:42 PM
Quote from: dazmann on August 07, 2021, 04:24:07 AM
Quote from: bategojko74 on August 06, 2021, 03:21:38 PM
Quote from: dazmann on August 04, 2021, 04:47:02 PM
Quote from: PhoenixMiner on August 04, 2021, 05:59:24 AM

  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused

Please let us know if you have any problems or questions related to PhoenixMiner 5.7b.

Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2.
I'm on windows 10 20H2, Radeon Software version 21.6.1
I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion.
Everything else is default.
Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings.

Thank you very much. I will look into that.

Aaaand nothing changed.
If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs.
The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios.
You are using very old drivers. Update the amd gpu driver.
which version bro? im using 20.4.2

Increase your VRAM to (NUMBER_OF_GPUS+1)*8 GB. This should help
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.7b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 17/08/2021, 06:42:33 UTC
Quote from: UnclWish on August 16, 2021, 04:41:03 PM
I think that clgreen work only up to some DAG number. Now I mine on DAG #434 (4.48Gb).
And I use latest 21.8.1 driver. Maybe clgreen works only on several set of drivers.
clgreen is incompatible wit clkernel 3. clkernel 3 overrides clgreen.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 10/08/2021, 16:09:27 UTC
Quote from: Cezarysw on August 09, 2021, 06:15:59 AM
I tried to use the -clKernel 3  option (Phoenix 5.7b) for various drivers from 18.6.1 to 21 .... but on each of these drivers -clKernel 3 is ignored for all GPU (RX580 Nitro+  8GB Micron and Hynix cards)
Please supply all of your options here.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 09/08/2021, 02:25:32 UTC
Quote from: speed07 on August 08, 2021, 08:59:17 AM
Quote from: bategojko74 on August 08, 2021, 06:21:32 AM
Quote from: dazmann on August 07, 2021, 09:59:42 PM
Quote from: dazmann on August 07, 2021, 04:24:07 AM
Quote from: bategojko74 on August 06, 2021, 03:21:38 PM
Quote from: dazmann on August 04, 2021, 04:47:02 PM
Quote from: PhoenixMiner on August 04, 2021, 05:59:24 AM

  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused

Please let us know if you have any problems or questions related to PhoenixMiner 5.7b.

Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2.
I'm on windows 10 20H2, Radeon Software version 21.6.1
I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion.
Everything else is default.
Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings.

Thank you very much. I will look into that.

Aaaand nothing changed.
If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3. You will not get increase with Vega, Navi or Nvidia GPUs.
The option -clKernel 3 is ignored for all GPU, when i use -clKernel 3. nitro+ rx570 8g samsung, stock bios.
You are using very old drivers. Upgrade the amd gpu driver.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 08/08/2021, 06:21:32 UTC
Quote from: dazmann on August 07, 2021, 09:59:42 PM
Quote from: dazmann on August 07, 2021, 04:24:07 AM
Quote from: bategojko74 on August 06, 2021, 03:21:38 PM
Quote from: dazmann on August 04, 2021, 04:47:02 PM
Quote from: PhoenixMiner on August 04, 2021, 05:59:24 AM

  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused

Please let us know if you have any problems or questions related to PhoenixMiner 5.7b.

Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2.
I'm on windows 10 20H2, Radeon Software version 21.6.1
I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion.
Everything else is default.
Your current gt value 69 is not the optimal for -clkernel 3. Put -gt 0 in your settings to find the new best gt value for -clkernel 3. After that you can put -gt NEW_BEST_GT_FOUND_VALUE in your settings.

Thank you very much. I will look into that.

Aaaand nothing changed.
If you have amd rx470/480/570/580 GPUs you will get +0.1mh/s per GPU with -clkernel 3
Post
Topic
Board Mining (Altcoins)
Merits 5 from 1 user
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 06/08/2021, 15:21:38 UTC
⭐ Merited by Vann (5)
Quote from: dazmann on August 04, 2021, 04:47:02 PM
Quote from: PhoenixMiner on August 04, 2021, 05:59:24 AM

  • Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused

Please let us know if you have any problems or questions related to PhoenixMiner 5.7b.

Tried the -clkernel 3 on my RX 480 8GB and got lower hashrates than -clkernel 2.
I'm on windows 10 20H2, Radeon Software version 21.6.1
I'm only using the -vmr 25 parameter and -gt 69 as per benchmark suggestion.
Everything else is default.
Put -gt 0 in your settings to find the best gt for -clkernel 3. After that you can put -gt BEST_GT_FOUND_VALUE
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.6d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 22/06/2021, 06:40:51 UTC
Quote from: unrealandy on Today at 05:46:38 AM
The new beta version is finally ready. You can download PhoenixMiner 5.7a from here:


Get out troll. ADMINISTRATORS PLEASE BAN THIS Account!!!
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 16/12/2020, 07:11:33 UTC
Quote from: bategojko74 on Today at 07:10:12 AM
Quote from: DooGZ on December 15, 2020, 11:32:48 PM
2 of my 4gb Polaris card hash rate went down another 2mhs today, -4mhs total, hash rate started to go down 2 or 3 weeks ago.

from 30mhs, current is 27mhs
From 28mhs, current is 24mhs.

Use -daglimit 408
Experiment with the value '4080' to achieve max hashrate.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 16/12/2020, 07:10:12 UTC
Quote from: DooGZ on December 15, 2020, 11:32:48 PM
2 of my 4gb Polaris card hash rate went down another 2mhs today, -4mhs total, hash rate started to go down 2 or 3 weeks ago.

from 30mhs, current is 27mhs
From 28mhs, current is 24mhs.

Use -daglimit 4080
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 05/12/2020, 11:44:40 UTC
Quote from: restless on Today at 09:56:19 AM
Quote from: lembzkie on December 04, 2020, 05:54:54 PM
2020.12.05:01:46:32.191: GPU1 GPU1: Allocating DAG for epoch #379 (3.93) GB
2020.12.05:01:46:32.191: GPU1 GPU1: Allocating buffers failed with: clCreateBuffer (-61).
2020.12.05:01:46:32.191: wdog Fatal error detected. Restarting.

Can anyone help me please?
Its like that since 2nd December... many people write here, but no one gave solution
Latest Hive OS with me, rig of 4 radeons - 8gb main one, 4gb the rest.
Switch to ETC
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
by
bategojko74
on 05/12/2020, 05:01:08 UTC
Quote from: groovytechno on December 04, 2020, 11:16:55 PM
I really hope Claymore issues an update soon. 

I'm getting far less shares with the same hashrate using Phoenix Miner than I was with Claymore's legendary v15 - Something around 15 percent less shares. 

Sad times at the ol' rig farm.


Using -rxboost option and amdmemtweak helps a lot.
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
by
bategojko74
on 02/12/2020, 19:39:46 UTC
Quote from: miner29 on Today at 05:17:14 PM
Quote from: bategojko74 on Today at 04:37:15 PM
Quote from: jgonzi on Today at 04:30:16 PM
Quote from: xxcsu on Today at 04:19:41 PM
Quote from: jgonzi on Today at 04:02:25 PM
After seen lot of people having problems now with Claymore, and the big crash of yesterday I have made an easy table of how to continue mining with another miner, that is able to mine with Nvidia and AMD.

....
....
....

or just switch to PhoenixMiner_5.3b_Windows , you basically can use the same Start.bat file , replace
EthDcrMiner64.exe to PhoenixMiner.exe and change the tag before your wallet address from -ewal to -wal .

If you are on windows you should run the miner program as a admin first ...




Completely true... also in the download of lolMiner you have also bat files for ETH, ETC, BEAM, Equihash and other big quantity of algos... and the Zombie Mode for ETH 4Gb cards too.
This smells like spam. I am just LOL on your statement that lolminer is better than Phoenixminer.

Can you show where jgonzi made the statement you accuse him of?  Ive not found it.  I see jgonzi listing ways to run PM or LOL for users with problems on claymore.

I also note the conversation quoted above where you were both disrespectful to claymore and handed your ass in a polite manner by him for your ignorant and false claims.

IT IS ABSOLUTELY TRUE THAT CLAYMORE IS SHOWING 1.5% HIGHER THAN THE REAL HASHRATE. IF YOU CAN"T COUNT YOUR SHARES FROM YOUR LOG FILES AND THE AVERAGE STATED HASHRATE FROM CLAYMORE THEN YOU MUST HAVE SERIOIUS BRAIN DAMAGE!!!

By the way PhoenixMiner also offers better zombie mode (with -daglim parameter) with higher hashrate mode than lolminer. Again you are not informed or can't accept the reality.
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
by
bategojko74
on 02/12/2020, 16:37:15 UTC
Quote from: jgonzi on Today at 04:30:16 PM
Quote from: xxcsu on Today at 04:19:41 PM
Quote from: jgonzi on Today at 04:02:25 PM
After seen lot of people having problems now with Claymore, and the big crash of yesterday I have made an easy table of how to continue mining with another miner, that is able to mine with Nvidia and AMD.

....
....
....

or just switch to PhoenixMiner_5.3b_Windows , you basically can use the same Start.bat file , replace
EthDcrMiner64.exe to PhoenixMiner.exe and change the tag before your wallet address from -ewal to -wal .

If you are on windows you should run the miner program as a admin first ...




Completely true... also in the download of lolMiner you have also bat files for ETH, ETC, BEAM, Equihash and other big quantity of algos... and the Zombie Mode for ETH 4Gb cards too.
This smells like spam.
Post
Topic
Board Mining (Altcoins)
Re: PhoenixMiner 5.3b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
by
bategojko74
on 02/12/2020, 15:14:11 UTC
Quote from: sxemini on Today at 02:57:59 PM
Quote from: gi4ev on Today at 01:08:09 PM
DID anyone GET A SOLUTION for this: Huh

ETH: CONNECTING TO ETHASH POOL EU1.ETHERMINE.ORG:4444 (PROTO: ETHPROXY)

ETH: CONNECTED TO ETHASH POOL EU1.ETHERMINE.ORG:4444  (172.65.207.109)

POOL LOGIN FAILED: INVALID JSON REQUEST

ETH: RECONNECTING IN 5 SECONDS...

LISTENING FOR CDM REMOTE MANAGER AT PORT 3333 IN READ ONLY MODE




Any idea how to resolve this?

I get it on ethermine / sparkpool / nanopool

without your commandline, your os, what cards, and so on, no one can help you.
Miner doesn't work on nonencrypted port 4444. Use ssl://eu1.ethermine.org:5555
Post
Topic
Board Mining (Altcoins)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
by
bategojko74
on 02/12/2020, 14:09:12 UTC
Quote from: cryptocryptic on Today at 01:52:58 PM
Same problem as others. Claymore has stopped working on my 10 rx580s. Tried Phoenixminer, it works but doesn't undervolt using -cvvdc. This is causing the rigs to draw too much power. Any suggestions?   
Change driver.