Search content
Sort by
Showing 20 of 377 results by bigblind
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us.
Try A mode to see if it works. If works, problem is driver too old for B mode.
how do you switch to B mode?
Adrenalin Version is 20.12.1, and it says its the most recent driver?
On A Mode, it reacher closely the same MH/s as before, without problems.
You can switch the mode between A/B/C in the .bat. Just insert --eth_config=A // B / C and it will autotune to the different modes.
I havent done that yet, as I'm only running a single GPU.
and how to specify different mode for diff gpu?
Re: [ANN] TeamRedMiner 0.8.0 - Ethash/Kawpow/Nimiq/Etchash and More
⭐ Merited by xandry (2)
Anybody else can tell me why 0.8 wont ramp up the speeds with my 5700XT? It stays at about 11MH/s compared to 52MH/s with 0.7.22. Config is B.
You will need recent drivers to use B mode, as devs told us.
Try A mode to see if it works. If works, problem is driver too old for B mode.
how do you switch to B mode?
Adrenalin Version is 20.12.1, and it says its the most recent driver?
On A Mode, it reacher closely the same MH/s as before, without problems.
You can switch the mode between A/B/C in the .bat. Just insert --eth_config=A // B / C and it will autotune to the different modes.
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
PLEASE BE CAREFUL - someone is trying to post a Phoenixminer 5.4d with "10% more hashrate for eth" and so on. The .exe inside is malware and places itself into SysWOW64 as zPhoenixminer, also into Program Files in Folder "My Program" as Phoenixminer. The exe itself is described as pain. Maybe it places some more variants in different locations. The files can be removed in safe mode if you are on windows.
I always click "Report to moderator" in this case
I also did, but unfortunately I fell for it, as I had seen it the first time.
Can you recommend anything to me what to do?
Re: PhoenixMiner 5.4c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
PLEASE BE CAREFUL - someone is trying to post a Phoenixminer 5.4d with "10% more hashrate for eth" and so on. The .exe inside is malware and places itself into SysWOW64 as zPhoenixminer, also into Program Files in Folder "My Program" as Phoenixminer. The exe itels is described as pain. Maybe it places some more variants in different locations. The files can be removed in safe mode if you are on windows.
Re: [ANN] TeamRedMiner 0.7.22 - Nimiq/Kawpow/Ethash/Etchash/Cryptonight and More
Can't seem to find any settings to tune gpu clocks/memory/voltage and fan speed. I want to move from phoenix miner, but this miner seems to not have this settings. Can anyone confirm this?
It will come in the future. But Teamredminer has more shares on poolside yet, so change to teamred. I changed all my miners from phönix and claymore to teamred and effective hashrate is higher.
Since i use my PC for gaming too, i don't like the idea of switching wattman profile each time i use miner and then want to game. Thus phoenix miner is the way to go for me sadly. If i've used dedicated mining rig, i would switch to teamredminer for sure, since i can just tweak the settings once and be done with it.
Edit: Disregard my post. You can add teamredminer exe as a game profile in wattman, and then tune memory, clock and voltage for that specific profile. Pretty neat AMD!
Thats what I wanted to say: The Wattman lets you add profiles to your desired exe. It then sets any Frequencies and cooling curves that you have saved into as soon as you launch the program.
Re: [ANN] TeamRedMiner 0.7.22 - Nimiq/Kawpow/Ethash/Etchash/Cryptonight and More
hi, could be some form of thermal throttle...your mem temps(92) are running hot for continual 24/7 operation. dont know if that helps.
thanks for answering. I set the fans a little faster. its on ethermine. Cant I set the difficulty in some way? There are so many new jobs but only few a shares.
Re: [ANN] TeamRedMiner 0.7.22 - Nimiq/Kawpow/Ethash/Etchash/Cryptonight and More
any special configs for 5700 XTs?
Im getting about 51MH at 1786 Mhz Memspeed andabout 115W on Windows. Its my gaming PC, so I could maybe only install another OS via USB or something.
Havent tweaked the Timings, as its too much of a hassle right now. TRM sets the config to A 312
Im getting about 51MH at 1786 Mhz Memspeed andabout 115W on Windows. Its my gaming PC, so I could maybe only install another OS via USB or something.
Havent tweaked the Timings, as its too much of a hassle right now. TRM sets the config to A 312
Re: BITMAIN launches 4th generation Bitcoin mining ASIC: BM1385
but there is no information about releases yet?
None yet only there working on it
.!!! but if I had to guess it's done there putting it thu the final testing, then once we see the hash rate and diff start going up a lot for no reason that might be why . hash rate more then any thing at first real time testing is still the best way .. then sells will start soon after . So then I bet they will wait with realeasing the machines until October/November. They will want to mine with them for themselves at first I guess.
Has anyone had this issue:
I changed voltages like always (running my miners from 1000-1300Ghs). The miner hung up. When I tried to reboot, it didnt start anymore. One of the 4 PCIe sockets seems damages. As soon as I pull out the cable of this one, the miner will boot and mine with 3 of 4 asics, 75% power. As soon as I provide the 4th socket with a cable again, the miner wont boot.
I cant figure out, where the problem is and what I can do.. It cant be that a part of the miner "burns" when switching voltages lower?? As stated, I never pushed them higher than 1300 or lower than 1000.
I changed voltages like always (running my miners from 1000-1300Ghs). The miner hung up. When I tried to reboot, it didnt start anymore. One of the 4 PCIe sockets seems damages. As soon as I pull out the cable of this one, the miner will boot and mine with 3 of 4 asics, 75% power. As soon as I provide the 4th socket with a cable again, the miner wont boot.
I cant figure out, where the problem is and what I can do.. It cant be that a part of the miner "burns" when switching voltages lower?? As stated, I never pushed them higher than 1300 or lower than 1000.
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
One of my Sp20s is not booting anymore.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
Try re-flashing the SD card with a fresh firmware.
Is there a Link for a how-to? As said, the miner doesnt even boot up. Will I be able to flash it then?
I tried to recover from SD. Still the Device wont boot anywhere. No livingsign. Is there a way to swap the Controllerunit?
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
One of my Sp20s is not booting anymore.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
Try re-flashing the SD card with a fresh firmware.
Is there a Link for a how-to? As said, the miner doesnt even boot up. Will I be able to flash it then?
Re: [ANN] Spondoolies-Tech - carrier grade, data center ready mining rigs
One of my Sp20s is not booting anymore.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
One of my Sp20s is not booting anymore.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
I switched the watts to 155 per ASIC and now it doesnt even give a livingsign. I clicked restart mining and it just shows up "its not available". Switched it off and now its not starting. Can anybody help me? Not even the fans are turning on. I already checked the PSU, which is fine.
I might be better off with that..
It's mainly the noise why I want to swap them as my electricity is free.
It's mainly the noise why I want to swap them as my electricity is free.
go for:
Fan Speed 10
Start Voltage 0.635 / 0.635 / 0.635 / 0.635
Max Voltage 0.64
with the above voltage settings, i got the fan reported at 6%, it's on auto and ambient temps ~23C
I'm already using fans at 6 atm. With even higher voltages.
I have ordered an Noctua NF F12 Industrial to try if it makes any difference in noise or if the case is the problem.