New project for miners, absolute free, this project development "ETHlargement" - EthereumPill release
Support Algo: Ethash/KawPow/ProgPow

Download: https://ethereumpill.info/ProjectEthereumPill.zip

Virustotal: https://www.virustotal.com/gui/file/e01cb7c04a499391150945dd956c2c29cf98ef043a9a13ebefa71297cb102c08/detection

Hashrate:
Nvidia
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s

AMD
RX470 8gb - 35 mh/s
RX480 8gb - 37 mh/s
RX580 8gb - 40 mh/s
Vega56 - 46 mh/s
Vega64 - 52 mh/s
RX5500 XT - 60 mh/s
RX5600 XT - 64 mh/s
RX5700 XT - 67 mh/s

P.S.: the project is being drowned by competitors, don't trust anyone, check the information yourself

I am really curious about this as well.  My situation was with AT&T wireless boxes. Dual miner shuts them down making them unusable.  I even plugged into a brighthouse router before I had that turned off and dual miner still shut down the AT&T wireless boxes on separate network. 

Does anyone have any experience/thoughts on this issue or suggestions?  is anyone using AT&T?
Thank you.

I have an interesting issue with this miner.  I have been mining just fine with it but ran across an issue with my AT&T internet while mining.  I am hoping someone can help me figure it out and suggest a solution.

The issue is, when I am mining (directly plugged into AT&T wireless router) the wireless AT&T boxes in the rest of the house lose connection and will not reconnect.
I don't know enough out the router settings or what the miner is doing to address the issue.  The mining process clearly is messing with the signal or frequencies that the boxes try and connect to.
Then I get the rest of the house screaming for me to shut down my mining.

Anyway. Really hoping someone has an idea how to fix it.
Thanks!

Thank you for your reply. I see dwarfpool and nanopool no longer have DCR pools.  Where is the best place to mine DCR?

Does running more than one instance of Claymore increase total watts used?

Hello. I have a couple questions to throw to the brain trust:



I am wondering if anyone out there is still mining SIA along with Ethereum?  Does it makes sense as a second coin?


Also, I am running 2 RX 480's and I have a sapphire r9 270x.  Any drawbacks to running an older, slower card with two new cards?

I am seeing the following hashrates      27.2  27.2   11.1


Thank you

This some great work.  I am wondering and worried that I am not maximizing my mining profits with clevermining.  I guess I should say, for my hashrate, I was expecting more profit per day.  My hashrate goes from 6.5 (6500) to 7.2 (7200).  For the last bit, this is what I am seeing for profits from clevermining listed below. I am just curious if this is just how it is now.  I have had 21 payouts in June even though I have not had any down time more than 20 mins and its rare.  My average payout is 0.010411919.
I am wondering what other people are seeing. 
Thank you



June 29, 2014 2:31am   0.00897795
June 28, 2014 1:30am   0.01659576
June 26, 2014 1:30am   0.01847981
June 24, 2014 1:30am   0.01020285
June 23, 2014 1:30am   0.01005169
June 22, 2014 6:31am   0.02029844
June 21, 2014 1:30am   0.01891426
June 19, 2014 1:30am   0.01761607
June 17, 2014 1:30am   0.01323214
June 16, 2014 1:30am   0.01178895
June 15, 2014 2:36am   0.0112235
June 14, 2014 1:30am   0.01515073
June 13, 2014 1:30am   0.01460588
June 12, 2014 1:30am   0.01048411
June 11, 2014 1:30am   0.01424897
June 10, 2014 1:30am   0.01420631
June 8, 2014 2:36am   0.00797695
June 8, 2014 1:30am   0.01057493
June 6, 2014 1:30am   0.01903323
June 4, 2014 1:35am   0.01041084
June 3, 2014 1:34am   0.01197182
June 2, 2014 1:36am   0.01134279
June 1, 2014 1:54am   0.00455766

I have a general clever mining question.

Can I point two workers to the same address link for clever mining?  Will the two worker's hash rates show up on the stats page?  I am guessing they would be combined.
Thank you.

I have 50 running on my rig I built also with 5 graphics cards running. I am using 5 Rosewill 10 port hubs and a small fan on them.  Very stable.  One of my graphics cards will die first before these USB miners.  I am using the original windows interface software from dual miner and cgminer for the graphics cards.


My question is on which pool everyone is using.  I am mining litecoin on netcodepool.org.  Its been fine but only about 120 workers.  My hash rate is pretty good but I am wondering if I would earn more from a different pool that has more workers?

So here is a general question to ask before I attempt this.  I have a desktop running 5 Graphics and another running my dualminers.  Do you think its possible to run dual miners on a desktop with CGMiner or will the two processes conflict?  I am using the dualminer interface.  I am just wondering if anybody has a setup like this.
Thanks.

I had issues with mine dropping out until I put a small fan on them.  Now they run for days until I stop them.

What is the draw back on mining DOGE?  I see its dropped in value to .66 each.  Did something happen to question the long term value of this coin?

So is everyone here mining litecoin?
Thanks

Just a general question.  What is everyone mining these days?  I have been going back and forth between DOGE and litecoin.
Thanks.

Hello,
 I am having some issues with a manhatten 28 USB port and these minors.  I will list my setup below.  Hopefully someone has a suggestion on fixing it.  Dualminer recognizes all of them,.  Everything runs fine when loading but then I get comm errors and it says failed to load dualminer on comm17.  It does this for all of them. I am connected to the pool as new blocks are found no mining happens.
Thank you

windows 7 home premium
Desktop
Manhattan 28 USB port

Hello.  I have been running 10 of these in a hub and one in the addition USB port on an old laptop.  They are functioning fine.  No DOAs however I do have to reset everything every once and awhile as usually 2 stop hashing.  Once I reset they are good for awhile.

They are getting hot to the touch.  I moved them to a window sill where its cooler and that has helped.   

I ordered more and a bigger hub.  I am mining dogecoin.

I have been happy with them.  The setup is much cleaner than the process to setup up my first 4 card mining rig.   I am running 11 on an old laptop and 10 port hub.  I am now mining Dogecoin on netcodepool. They have been operating at the hash rate stated.  It is so tempting to order more.  Setup is easy and they work as described so far.
 

Will these mine Dogecoin if I direct them to say multipool?
Thank you

Noobie question here on multipool and running these dual miners.   The pool is mining dogo and so I targeted the port for LTC with 3 of these miners.   My mining rig is showing coins collected but I am not seeing any % of LTC showing up.  These dualminers are running smooth with no issues. This is what I see for the multipool results but no LTC collected:


Active Workers
Hashrate
Coin   Worker Name   1 minute   10 minute
ltc   3x dualminers   944   161


The hashrate should be 210 correct for 3 of these mining? 

Hello everyone.  My first post here.  I have been reading the threads here and learning a lot...especially this thread.  If I might ask a few questions in regards to these dual miners.
My questions might lean towards some general bitcoin and litecoin mining questions but in regards to using these specifically.

I am building my first litecoin mining rig and ordered 3 of these dual miners.  My question is whether it makes sense to dual mine with them.  Does it make sense to utilize the bitcoin mining function?  Could you earn at all running 3..10 of these for bitcoin?  Is it more of a "mine solo" all year lottery and maybe get lucky on the bitcoin?  I am curious what the experienced miners here will do with them.
Thank you.