Search content
Sort by
Showing 20 of 85 results by bugilt
Have you seen any fan failures?. I wonder if keeping them in oil would keep them lubricated, as several fans of my 5830s need more oil every 2-3 months.
No fan failures. I would imagine the oil is lubricating them.
This was intriguing. Thank you for sharing. I considered copyingsomething like this because I figured I might could save money but I guess this is more about cutting down heat. I live in Alaska and run the my rigs in My crawl space so I guess I'll just marvel at the awesome Ness of your contraption. Maybe I'll do an oil rig as my next pc upgrade. Hmmmm. Got me thinking. On Swype text sorry for errors
I would imagine you could use the hot and cold temps to generate some electricity from a peltier plate. I would imagine you can use all the heat from the mining setup to warm your house.
Re: [ANN][ENRG]Energycoin - POS Free IPO! On 5 Exchanges! Join the IPO!
Sorry, but did you send the coins out yet?
read op, it said there is still 1 day left.
Re: [ANN][ENRG]Energycoin - POS Free IPO! On 5 Exchanges! Join the IPO!
I don't have the coins
There is still one more day left for the distribution.
Count me in. I also want some.
The temps vary from 60c to 75c. This is still the original configuration though. The fans on the radiator are running at 50%. I haven't added the spill over tank for the pump. The radiator is also still in the sun in the afternoon.
The warranty is most likely voided after putting it in oil. I don't think they'd have any signs of after I cleaned off the card though.
The warranty is most likely voided after putting it in oil. I don't think they'd have any signs of after I cleaned off the card though.
temps are good but what are fan rpms and how much total did it cost you ?
82-122 RPM @ 70%
$300 est. Had some parts already.
The temps vary from 60c to 75c. This is still the original configuration though. The fans on the radiator are running at 50%. I haven't added the spill over tank for the pump. The radiator is also still in the sun in the afternoon.
May-be you could replace the fans and radiator (which is, lets face it, the ugly part in the design) by a system where cold water would circulate in the mineral oil tank. (what is the more expensive ? water or electricity ?)Was wondering, why did you keep the active cooling on the cards ? Do it has any use ? (obviously this time this would void the warranty for sure...)
How would I cool the water? The fans on the cards help move the fluid around. The heat sink is a better conductor than oil.
The temps vary from 60c to 75c. This is still the original configuration though. The fans on the radiator are running at 50%. I haven't added the spill over tank for the pump. The radiator is also still in the sun in the afternoon.
The warranty is most likely voided after putting it in oil. I don't think they'd have any signs of after I cleaned off the card though.
The warranty is most likely voided after putting it in oil. I don't think they'd have any signs of after I cleaned off the card though.
Can you post a written how-to? this would be great for alot of people...especially now that the summer is coming in some parts of the world.
Yes, I was thinking about that since I started building it. Here are the parts.
The pump you can see in the video was my first guess.
http://www.amazon.com/gp/product/B002PDBRXE/ref=oh_details_o07_s00_i00?ie=UTF8&psc=1
The second pump was almost enough. I combined the two and flow looked good.
http://www.amazon.com/gp/product/B0049XKMGQ/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
I also bought a cheap bilge pump from china for testing.
http://www.amazon.com/gp/product/B00INSTAXO/ref=oh_details_o02_s00_i00?ie=UTF8&psc=1
I bought the tubing to fit the second pump.
http://www.amazon.com/gp/product/B002GUFW3W/ref=oh_details_o08_s00_i00?ie=UTF8&psc=1
I never knew you could find radiators for this cheap. until now.
http://www.amazon.com/gp/product/B001DH81SW/ref=oh_details_o06_s00_i00?ie=UTF8&psc=1
Bought two fans that should have fit on the same side. They didn't fit well enough. I switched the polarity on one of the motores to run in reverse. I'm sure it's not very efficient. The solution works for now though. http://www.amazon.com/gp/product/B003U7UR3A/ref=oh_details_o05_s00_i00?ie=UTF8&psc=1
Ordered 5 gal of mineral oil. I would love to use the 3m fluid, but it's out of the budget. This cheap stuff has worked fine so far. Makes a good laxative too. http://www.amazon.com/gp/product/B000HHLUE6/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1
This oil is a better solution.
http://store.steoil.com/mineral-oil-pc-kit/?sort=featured
Amazon Prime did this to me.
I already had a few parts lying around. I'm not sure the cost of theses parts or the availability.
I used shark bite tubing and fittings to plum the radiator. They fit snug in the main radiator inlet and outlet.
I used some 2 part marine epoxy to hold them in.
1/4" (3/8" OD) X 1/4" (3/8" OD) http://www.sharkbite.com/product/elbows/
The tubing
The adapter to the tubing. http://www.sharkbite.com/product/polybutelene-adapters/
I did it mainly to keep mining cost low. I have been working on a Mineral oil submerge mining rig for the past couple weeks. I got it up and running so I thought I'd share.
http://youtu.be/EpNERMxvPTk
I'm going to fill it up enough to allow the mineral oil to flow over the cards. I also plan on adding a reservoir that the main pump sits in. Allowing the warm fluid from the top to spill over.
http://youtu.be/EpNERMxvPTk
I'm going to fill it up enough to allow the mineral oil to flow over the cards. I also plan on adding a reservoir that the main pump sits in. Allowing the warm fluid from the top to spill over.
Re: [ANN] CommunityCoin (COMM) Fair & FREE Distribution | Pure PoS | Join Community
I asked from a community member to make me a blacklist, s/he is working on it (by scanning threads and posts). After that i plan to start earlier the second round for those who contributed will get second stakes before we go to 500. Please hurry and bring more people here only about 70 people left to complete 500.
Also those who waits second change you can come over me by PM, check the ecoiner.org link bottom first. Show me some products you did so far for comm group. Like you can err, i can also err remember this. after initial distribution when i found out so many fakes coming i coded new submission form for you ( so i can less err) and make it more secure and able to dedect good seeds and make it easier for me to analyse. Also we found out initial plan reaching 1000 member was not possible. Though we observe at NEM and some other coins it was very possible. Community decided to make 500 people get it. So that's why we are going to complete 500.
check it out http://ecoiner.org/communitycoin/rejected-accepted-username-list-13-april-1665/
Also those who waits second change you can come over me by PM, check the ecoiner.org link bottom first. Show me some products you did so far for comm group. Like you can err, i can also err remember this. after initial distribution when i found out so many fakes coming i coded new submission form for you ( so i can less err) and make it more secure and able to dedect good seeds and make it easier for me to analyse. Also we found out initial plan reaching 1000 member was not possible. Though we observe at NEM and some other coins it was very possible. Community decided to make 500 people get it. So that's why we are going to complete 500.
check it out http://ecoiner.org/communitycoin/rejected-accepted-username-list-13-april-1665/
Are those listed there all the ones who received coins? Or only the blacklisted? I'm asking because my name is on the list and I'm not sure I should be worried :-)
Adriano
blacklisted
First of all, PM the dev.
Re: [ANN] CommunityCoin (COMM) Fair & FREE Distribution | Pure PoS | No Premine!
We just done new list updated, checking each application carefully. Meantime enjoy and bring us more exchange vote or listings.
Thanks for the hard work.
Re: [ANN] CommunityCoin (COMM) Fair & FREE Distribution | Pure PoS | No Premine!
Hallo everyone.
I am a programmer,I like this coin very much so I want to join.
I posted it on cryptocointalk.
https://cryptocointalk.com/topic/9028-communitycoin-comm-information/?p=77822
ID:Bugilt
Thanks a lot.
I am a programmer,I like this coin very much so I want to join.
I posted it on cryptocointalk.
https://cryptocointalk.com/topic/9028-communitycoin-comm-information/?p=77822
ID:Bugilt
Thanks a lot.
Hallo,dev.
I am a programmer and I will contribute my effort to promote this coin in the future.
This is my information.
Name: bugilt
Posts: 72
Activity: 71
Position: Member
Date Registered: April 09, 2013, 06:41:40 AM
Last Active: Today at 06:32:14 AM
I posted my info both on cryptocointalk and bitcointalk.
Waiting for my shake.
Thank you very much
Re: [ANN] CommunityCoin (COMM) Fair & FREE Distribution | Pure PoS | No Premine!
We found some people still try to cheat by doing the following:
1. Double post in fb/ecoiner/cryptocointalk
2. Use different bitcointalk user ids with same wallet addresses
We have a strict checking system for frauds. Once the above situations found, you will be permanently excluded from our distribution list. So please, do not waste your time and our time trying to cheat.
Also, in order to be eligible, you must post in this thread stating why you want to join. Posting only at cryptocointalk or ecoiner or facebook will not get you any coins. Again, please read carefully the OP.
1. Double post in fb/ecoiner/cryptocointalk
2. Use different bitcointalk user ids with same wallet addresses
We have a strict checking system for frauds. Once the above situations found, you will be permanently excluded from our distribution list. So please, do not waste your time and our time trying to cheat.
Also, in order to be eligible, you must post in this thread stating why you want to join. Posting only at cryptocointalk or ecoiner or facebook will not get you any coins. Again, please read carefully the OP.
Hi,I posted info in this thread and cryptocointalk both,but I still get nothing.
I read the OP one more time and I think I should meet all the conditions.
Could you tell me how can I get my shake?
Thank you very much.
I think maybe we need to be patient.
Re: [ANN] CommunityCoin (COMM) Fair & FREE Distribution | Pure PoS | No Premine!
Hallo everyone.
I am a programmer,I like this coin very much so I want to join.
I posted it on cryptocointalk.
https://cryptocointalk.com/topic/9028-communitycoin-comm-information/?p=77822
ID:Bugilt
Thanks a lot.
I am a programmer,I like this coin very much so I want to join.
I posted it on cryptocointalk.
https://cryptocointalk.com/topic/9028-communitycoin-comm-information/?p=77822
ID:Bugilt
Thanks a lot.
Comeon gents, answer.. Are ppl GPU mining on this?
Yes, and they have been since release. That is bollocks. I'm not mining this. If I knew I would have prepared. Fucking bullshit!!!!
The Devs didn't even know GPU mining was working.