Search content
Sort by
Showing 15 of 15 results by cbaa
Hi. Is there a faucet claim limit? There seems to be that limit.
At least from the wallet, the daily faucet limit is 5 KAS.
Use a vpn and change your ip. Login again and reclaim the faucet. Can do it lot of time. I’ve done it 20 time before getting bored
Re: PhoenixMiner 5.1c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
each time i start the miner, it mine for few minutes, then i got something like that into my log.. and pc reboot, forever. 5.0e & 5.1c.. same thing
2020.09.08:22:22:14.817: eths Eth: Share accepted in 43 ms
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^>
anyone have an idea?
it run 5 amd 480 8g, new power supply 850w. lubuntu 20.04 driver amd 20.30 (does the same with lubuntu 18.04)
2020.09.08:22:22:14.817: eths Eth: Share accepted in 43 ms
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^>
anyone have an idea?
it run 5 amd 480 8g, new power supply 850w. lubuntu 20.04 driver amd 20.30 (does the same with lubuntu 18.04)
Are your GPUs all undervolted to around 900mV or so? Because your PSU seems like it might be running out of current if you are running them on stock voltage. Also depending on the rail set-up there might not even be 850w in total.
If you undervolt to 900mV then the rig should use about 700 watts and it'll reduce the load and should run without any issues. Reason why I think its PSU is because it doesn't just crash or freeze. Usually when the PSU is over-current, it either shuts down or it causes PC to reboot.
so if im right, i just have to set -cvddc 900 into the start_miner.sh to do so?
Re: PhoenixMiner 5.1c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
each time i start the miner, it mine for few minutes, then i got something like that into my log.. and pc reboot, forever. since 5.1c.
2020.09.08:22:22:14.817: eths Eth: Share accepted in 43 ms
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^>
2020.09.08:22:22:14.817: eths Eth: Share accepted in 43 ms
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^>
Re: PhoenixMiner 4.0b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Unknown OpenCL driver version! Hashrate and stale shares may suffer
OpenCL platform: OpenCL 2.1 AMD-APP (2766.4)
Available GPUs for mining:
GPU1: AMD Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 1.2, 3.2 GB VRAM, 36 CUs
GPU2: AMD Radeon (TM) RX 480 Graphics (pcie 3), OpenCL 1.2, 7.9 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 4), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 6), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie
, OpenCL 1.2, 8 GB VRAM, 36 CUs
im on ubuntu. i wonder witch is the know opencl driver ?
OpenCL platform: OpenCL 2.1 AMD-APP (2766.4)
Available GPUs for mining:
GPU1: AMD Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 1.2, 3.2 GB VRAM, 36 CUs
GPU2: AMD Radeon (TM) RX 480 Graphics (pcie 3), OpenCL 1.2, 7.9 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 4), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 6), OpenCL 1.2, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie
, OpenCL 1.2, 8 GB VRAM, 36 CUsim on ubuntu. i wonder witch is the know opencl driver ?
Re: PhoenixMiner 4.0b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi Guys,
Getting solid 23.5 to 24 Mh/s, how does these settings look to you? using awesome miner and mining from 12am til 12pm (12 hours) and another 4 hours during the day when idle.
Should i change or not? power consumption has to be low and temperatures @ 62 - 63c is adequate.
thoughts:
https://ibb.co/rmBHRPt
Getting solid 23.5 to 24 Mh/s, how does these settings look to you? using awesome miner and mining from 12am til 12pm (12 hours) and another 4 hours during the day when idle.
Should i change or not? power consumption has to be low and temperatures @ 62 - 63c is adequate.
thoughts:
https://ibb.co/rmBHRPt
Ok, what is your gpu?
Re: PhoenixMiner 4.0b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
what about ProgPoW miner? It's coming soon
Yeah, I asked it 6 post earlier with no answer
Re: PhoenixMiner 4.0b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi, okay i tried those suggestions
thanks for taking the time, any suggestions?
Quote
Phoenix Miner 4.0b Windows/msvc - Release build
-----------------------------------------------
CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 2 pools (0 from command-line)
Eth: primary pool: eu1.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 39C 0%
Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.106)
Eth: New job #2f953f33 from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Light cache generated in 2.8 s (16.1 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
GPU1: Generating DAG for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 13%
Eth: New job #5fecb20d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 28%
GPU1: DAG 44%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 59%
GPU1: DAG 75%
Eth: New job #5aa8689d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 91%
GPU1: DAG generated in 10.3 s (280.0 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
CUDA error in CudaProgram.cu:329 : unspecified launch failure (719)
GPU1 search error: unspecified launch failure
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Eth: New job #54d320ba from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
CUDART error in CudaProgram.cu:57 : all CUDA-capable devices are busy or unavailable (46)
GPU1 initMiner error: all CUDA-capable devices are busy or unavailable
-----------------------------------------------
CUDA version: 10.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 970 (pcie 1), CUDA cap. 5.2, 4 GB VRAM, 13 CUs
Nvidia driver version: 416.16
Eth: Loading pools from epools.txt
Eth: the pool list contains 2 pools (0 from command-line)
Eth: primary pool: eu1.ethermine.org:4444
Starting GPU mining
Eth: Connecting to ethash pool eu1.ethermine.org:4444 (proto: EthProxy)
Listening for CDM remote manager at port 3333 in read-only mode
GPU1: 39C 0%
Eth: Connected to ethash pool eu1.ethermine.org:4444 (172.65.207.106)
Eth: New job #2f953f33 from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #233
Light cache generated in 2.8 s (16.1 MB/s)
GPU1: Allocating DAG (2.84) GB; good for epoch up to #235
GPU1: Generating DAG for epoch #233
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 13%
Eth: New job #5fecb20d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 28%
GPU1: DAG 44%
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
GPU1: DAG 59%
GPU1: DAG 75%
Eth: New job #5aa8689d from eu1.ethermine.org:4444; diff: 4000MH
GPU1: DAG 91%
GPU1: DAG generated in 10.3 s (280.0 MB/s)
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
CUDA error in CudaProgram.cu:329 : unspecified launch failure (719)
GPU1 search error: unspecified launch failure
Thread(s) not responding. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
Eth: New job #54d320ba from eu1.ethermine.org:4444; diff: 4000MH
GPU1: Starting up... (0)
CUDART error in CudaProgram.cu:57 : all CUDA-capable devices are busy or unavailable (46)
GPU1 initMiner error: all CUDA-capable devices are busy or unavailable
thanks for taking the time, any suggestions?
all that i can think of is nvidia driver is issue. tray latest so you can do at least cuda 9 or even try for cuda 10 see what happens.
Look carefully. Already cuda10..
Re: PhoenixMiner 4.0b: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi, does PhoenixMiner will support ProgPow as it seem it's comming soon ( https://www.ethnews.com/eth-core-devs-progpow-tentatively-a-go ) ?
Re: PhoenixMiner 3.5d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Very good miner, stable as rock and gives best hashrate.
Yeah, but it need fan control for linux like claymore
Re: PhoenixMiner 3.5d: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Hi there. I'm using phoenixminer since yesterday and till now it's nice. The only concern is the fact that fan speed cannot be controlled under linux. I'm waiting for your new version..
Since your rig has been working for 2 years, try to unplug all cards but, does it mine now? if it does, plug in another one and keep on going until it crashes.
when the rig crashes at X cards take the newly added Card, put it away and remove all the cards in the rig, now take the card you just put away and put it in your rig, does it mine ? if not then it's the card, if the rig is mining with that card it might be that the PSU has lived it's life
when the rig crashes at X cards take the newly added Card, put it away and remove all the cards in the rig, now take the card you just put away and put it in your rig, does it mine ? if not then it's the card, if the rig is mining with that card it might be that the PSU has lived it's life
Thanks dude, i've got a DPS-1200 PSU doing nothing.. I have plug the 4 gpu on it. Now it mine. PSU of the pc isnt good enough for mobo/fan/etc +gpu. End of life, as you said. Thanks alot.
Is your power supply powerful enough and a good quality one?
Well, it worked for the last 2 years A1. It is a Rosewill ARC-M 650W 80PLUS Bronze
Hi. Im using ubuntu 18.04 lts, driver up to date. 16g ram I have 4 gpu: 1 amd rx 480 4g, 2 amd rx 480 8g and 1 gtx 1060 6g. I mine eth for about 2 years, using claymore. Until fews days, everything was perfect but now, when I start the miner, the rig turn off instant. I have try with etminer and same thing happen. Anyone have an idea of what if wrong?
Hi. Im using ubuntu 18.04 lts, driver up to date. 16g ram I have 4 gpu: 1 amd rx 480 4g, 2 amd rx 480 8g and 1 gtx 1060 6g. I mine eth for about 2 years, using claymore. Until fews days, everything was perfect but now, when I start the miner, the rig turn off instant. I have try with etminer and same thing happen. Anyone have an idea of what if wrong?