Search content
Sort by
Showing 20 of 24 results by ccexperiment
Good evening everyone ...
i was previously on windows 10 for mining ... but i ran in so much trouble and difficulty and then i bought Ethos.
but i have 3 issue to setup ethos ...
si i have imaged ethos 1.3.1 on a usb3 stick
i'm able to boot on it but now i'm facing few issues ...
1. I have a mixed rig (1R9 280X + 1RX70 + 1RX58 +2x 1050 TI). At the launch of ethos he's able to see all the 5 cards but once i'm on the desktop he see only 3 cards (The 3 AMD).
i think i have read somewhere i have to setup claymore to be able to run the 5 cards
https://ibb.co/fNKGk8">
https://preview.ibb.co/hnCrJT/ethos1.png" alt="ethos1" border="0">
2. i have updated the local.conf file this way to use claymore but when i try minestart he tell me: invalid miner specified
i also see lot of people talking about a third files (claymore.stub.conf) to configure claymore but unable to find it ...
3. i get clock error gpu clock problem. GPU0 and GPU1 are affected how to get ride of this? (as when i was in windows 10 i didn't got this kind of error)
4. how to proceed for my NVDIA cards to be detected?
thank for your help
Best regards
Frederic
i was previously on windows 10 for mining ... but i ran in so much trouble and difficulty and then i bought Ethos.
but i have 3 issue to setup ethos ...
si i have imaged ethos 1.3.1 on a usb3 stick
i'm able to boot on it but now i'm facing few issues ...
1. I have a mixed rig (1R9 280X + 1RX70 + 1RX58 +2x 1050 TI). At the launch of ethos he's able to see all the 5 cards but once i'm on the desktop he see only 3 cards (The 3 AMD).
i think i have read somewhere i have to setup claymore to be able to run the 5 cards
https://ibb.co/fNKGk8">
2. i have updated the local.conf file this way to use claymore but when i try minestart he tell me: invalid miner specified
i also see lot of people talking about a third files (claymore.stub.conf) to configure claymore but unable to find it ...
Code:
globalminer claymore
maxgputemp 85
stratumproxy enabled
proxywallet ethaddress.minername/myemail
dualminer enabled
dualminer-coin dcr
proxypool1 eth-eu1.nanopool.org:9999
proxypool2 eth-eu2.nanopool.org:8888
dualminer-pool dcr-eu.coinmine.pl:2222
dualminer-wallet mydecredaddress
flags --cl-global-work 8192 --farm-recheck 200
poolemail mydecredemail
globalfan 85
claymore=flags -colors 1 -mode 0 -epool eth-eu1.nanopool.org:9999 -ewal ethaddress.minername/myemail -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal minername -dpsw x -dcoin dcr
maxgputemp 85
stratumproxy enabled
proxywallet ethaddress.minername/myemail
dualminer enabled
dualminer-coin dcr
proxypool1 eth-eu1.nanopool.org:9999
proxypool2 eth-eu2.nanopool.org:8888
dualminer-pool dcr-eu.coinmine.pl:2222
dualminer-wallet mydecredaddress
flags --cl-global-work 8192 --farm-recheck 200
poolemail mydecredemail
globalfan 85
claymore=flags -colors 1 -mode 0 -epool eth-eu1.nanopool.org:9999 -ewal ethaddress.minername/myemail -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal minername -dpsw x -dcoin dcr
3. i get clock error gpu clock problem. GPU0 and GPU1 are affected how to get ride of this? (as when i was in windows 10 i didn't got this kind of error)
4. how to proceed for my NVDIA cards to be detected?
thank for your help
Best regards
Frederic
1) EthOS can't run a mix of AMD and Nvidia, it only runs one or the other. You will need a second rig for your Nvidia cards, or sell them and buy equivalent AMDs.
EDIT TO ADD: It may be POSSIBLE to run both, but not through the config files and probably not visibly in the control panel. You can try starting a second miner separately in the cli, but I have no idea if that will work. I know that method works for CPU mining, but it does hinder the GPU hashrate slightly.
2) did you set the miner to run on local and not remote? The instrux to do so are on the EthOS mainpage, it's a simple command (I don't remember it offhand, but it's literally just one command in the cli).
3) As for the clock error problems, usually those are due to global settings with mixed cards, but since you don't seem to have any clock settings listed, it's probably because you are including the claymore flags line. You don't need those in EthOS, you already have pool and wallet info for both coins above it; comment that line out and see if that fixes the issue.
4) See 1. It (and the lack of CPU mining, which doesn't bother me) are the only negatives to EthOS I've found in almost a year of use...
Thank you for the reply.
i got them working mixed with claymore (indeed it's not appearing on the desktop. i have to do a show miner in the terminal and then i can see what i'm looking for.
Now i juste a to OC 3 cards (1 is OC in the bios of the card) and everything will be perfect.
Only the HD one is not mining, i moved her to my second computer who's mining burst coin with HDD
Good evening everyone ...
i was previously on windows 10 for mining ... but i ran in so much trouble and difficulty and then i bought Ethos.
but i have 3 issue to setup ethos ...
si i have imaged ethos 1.3.1 on a usb3 stick
i'm able to boot on it but now i'm facing few issues ...
1. I have a mixed rig (1R9 280X + 1RX70 + 1RX58 +2x 1050 TI). At the launch of ethos he's able to see all the 5 cards but once i'm on the desktop he see only 3 cards (The 3 AMD).
i think i have read somewhere i have to setup claymore to be able to run the 5 cards
https://ibb.co/fNKGk8">https://preview.ibb.co/hnCrJT/ethos1.png" alt="ethos1" border="0">
2. i have updated the local.conf file this way to use claymore but when i try minestart he tell me: invalid miner specified
i also see lot of people talking about a third files (claymore.stub.conf) to configure claymore but unable to find it ...
3. i get clock error gpu clock problem. GPU0 and GPU1 are affected how to get ride of this? (as when i was in windows 10 i didn't got this kind of error)
4. how to proceed for my NVDIA cards to be detected?
thank for your help
Best regards
Frederic
i was previously on windows 10 for mining ... but i ran in so much trouble and difficulty and then i bought Ethos.
but i have 3 issue to setup ethos ...
si i have imaged ethos 1.3.1 on a usb3 stick
i'm able to boot on it but now i'm facing few issues ...
1. I have a mixed rig (1R9 280X + 1RX70 + 1RX58 +2x 1050 TI). At the launch of ethos he's able to see all the 5 cards but once i'm on the desktop he see only 3 cards (The 3 AMD).
i think i have read somewhere i have to setup claymore to be able to run the 5 cards
https://ibb.co/fNKGk8">
2. i have updated the local.conf file this way to use claymore but when i try minestart he tell me: invalid miner specified
i also see lot of people talking about a third files (claymore.stub.conf) to configure claymore but unable to find it ...
Code:
globalminer claymore
maxgputemp 85
stratumproxy enabled
proxywallet ethaddress.minername/myemail
dualminer enabled
dualminer-coin dcr
proxypool1 eth-eu1.nanopool.org:9999
proxypool2 eth-eu2.nanopool.org:8888
dualminer-pool dcr-eu.coinmine.pl:2222
dualminer-wallet mydecredaddress
flags --cl-global-work 8192 --farm-recheck 200
poolemail mydecredemail
globalfan 85
claymore=flags -colors 1 -mode 0 -epool eth-eu1.nanopool.org:9999 -ewal ethaddress.minername/myemail -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal minername -dpsw x -dcoin dcr
maxgputemp 85
stratumproxy enabled
proxywallet ethaddress.minername/myemail
dualminer enabled
dualminer-coin dcr
proxypool1 eth-eu1.nanopool.org:9999
proxypool2 eth-eu2.nanopool.org:8888
dualminer-pool dcr-eu.coinmine.pl:2222
dualminer-wallet mydecredaddress
flags --cl-global-work 8192 --farm-recheck 200
poolemail mydecredemail
globalfan 85
claymore=flags -colors 1 -mode 0 -epool eth-eu1.nanopool.org:9999 -ewal ethaddress.minername/myemail -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal minername -dpsw x -dcoin dcr
3. i get clock error gpu clock problem. GPU0 and GPU1 are affected how to get ride of this? (as when i was in windows 10 i didn't got this kind of error)
4. how to proceed for my NVDIA cards to be detected?
thank for your help
Best regards
Frederic
Good evening everyone ...
i was previously on windows 10 for mining ... but i ran in so much trouble and difficulty and then i bought Ethos.
but i have 3 issue to setup ethos ...
si i have imaged ethos 1.3.1 on a usb3 stick
i'm able to boot on it but now i'm facing few issues ...
1. I have a mixed rig (1R9 280X + 1RX70 + 1RX58 +2x 1050 TI). At the launch of ethos he's able to see all the 5 cards but once i'm on the desktop he see only 3 cards (The 3 AMD).
i think i have read somewhere i have to setup claymore to be able to run the 5 cards
https://ibb.co/fNKGk8">https://preview.ibb.co/hnCrJT/ethos1.png" alt="ethos1" border="0">
2. i have updated the local.conf file this way to use claymore but when i try minestart he tell me: invalid miner specified
i also see lot of people talking about a third files (claymore.stub.conf) to configure claymore but unable to find it ...
3. i get clock error gpu clock problem. GPU0 and GPU1 are affected how to get ride of this? (as when i was in windows 10 i didn't got this kind of error)
4. how to proceed for my NVDIA cards to be detected?
thank for your help
Best regards
Frederic
i was previously on windows 10 for mining ... but i ran in so much trouble and difficulty and then i bought Ethos.
but i have 3 issue to setup ethos ...
si i have imaged ethos 1.3.1 on a usb3 stick
i'm able to boot on it but now i'm facing few issues ...
1. I have a mixed rig (1R9 280X + 1RX70 + 1RX58 +2x 1050 TI). At the launch of ethos he's able to see all the 5 cards but once i'm on the desktop he see only 3 cards (The 3 AMD).
i think i have read somewhere i have to setup claymore to be able to run the 5 cards
https://ibb.co/fNKGk8">
2. i have updated the local.conf file this way to use claymore but when i try minestart he tell me: invalid miner specified
i also see lot of people talking about a third files (claymore.stub.conf) to configure claymore but unable to find it ...
Code:
globalminer claymore
maxgputemp 85
stratumproxy enabled
proxywallet ethaddress.minername/myemail
dualminer enabled
dualminer-coin dcr
proxypool1 eth-eu1.nanopool.org:9999
proxypool2 eth-eu2.nanopool.org:8888
dualminer-pool dcr-eu.coinmine.pl:2222
dualminer-wallet mydecredaddress
flags --cl-global-work 8192 --farm-recheck 200
poolemail mydecredemail
globalfan 85
claymore=flags -colors 1 -mode 0 -epool eth-eu1.nanopool.org:9999 -ewal ethaddress.minername/myemail -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal minername -dpsw x -dcoin dcr
maxgputemp 85
stratumproxy enabled
proxywallet ethaddress.minername/myemail
dualminer enabled
dualminer-coin dcr
proxypool1 eth-eu1.nanopool.org:9999
proxypool2 eth-eu2.nanopool.org:8888
dualminer-pool dcr-eu.coinmine.pl:2222
dualminer-wallet mydecredaddress
flags --cl-global-work 8192 --farm-recheck 200
poolemail mydecredemail
globalfan 85
claymore=flags -colors 1 -mode 0 -epool eth-eu1.nanopool.org:9999 -ewal ethaddress.minername/myemail -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal minername -dpsw x -dcoin dcr
3. i get clock error gpu clock problem. GPU0 and GPU1 are affected how to get ride of this? (as when i was in windows 10 i didn't got this kind of error)
4. how to proceed for my NVDIA cards to be detected?
thank for your help
Best regards
Frederic
Maybe same issue: https://wccftech.com/nvidias-geforce-gtx-1060-3gbs-rendered-useless-ethereum-mining-dag-file-update/
yes probably, i'm actually trying to add these two card to my mining computer.
They will not be primary so maybe i will be able to keep mining ether with them
found the issue ...
memory are the same, manufacture date, ... everything the same BUT ...
for unknow reason GPU1 is not accepting the same OC as the GPU 0 ...
i have lowered little bit OC and for now seems to be ok
ETH - Total Speed: 27.994 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:21
ETH: GPU0 14.154 Mh/s, GPU1 13.839 Mh/s
DCR - Total Speed: 466.564 Mh/s, Total Shares: 21, Rejected: 0
DCR: GPU0 235.907 Mh/s, GPU1 230.657 Mh/s
Thank you for help
memory are the same, manufacture date, ... everything the same BUT ...
for unknow reason GPU1 is not accepting the same OC as the GPU 0 ...
i have lowered little bit OC and for now seems to be ok
ETH - Total Speed: 27.994 Mh/s, Total Shares: 3, Rejected: 0, Time: 00:21
ETH: GPU0 14.154 Mh/s, GPU1 13.839 Mh/s
DCR - Total Speed: 466.564 Mh/s, Total Shares: 21, Rejected: 0
DCR: GPU0 235.907 Mh/s, GPU1 230.657 Mh/s
Thank you for help
hello all,
i have 2 MSI GFORCE GTX 1050TI 4GB.
They are all the same and OC settings cloned with afterburner
BUT ....
when i mine hashrate a different ... why?
ETH - Total Speed: 25.801 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 14.138 Mh/s, GPU1 11.662 Mh/s
DCR - Total Speed: 430.011 Mh/s, Total Shares: 1, Rejected: 0
DCR: GPU0 235.639 Mh/s, GPU1 194.372 Mh/s
GPU0 has same result as when he's alone
do you have any idea?
thank you
i have 2 MSI GFORCE GTX 1050TI 4GB.
They are all the same and OC settings cloned with afterburner
BUT ....
when i mine hashrate a different ... why?
ETH - Total Speed: 25.801 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 14.138 Mh/s, GPU1 11.662 Mh/s
DCR - Total Speed: 430.011 Mh/s, Total Shares: 1, Rejected: 0
DCR: GPU0 235.639 Mh/s, GPU1 194.372 Mh/s
GPU0 has same result as when he's alone
do you have any idea?
thank you
Re: HELP + REWARD - issue to add 3 GPU to my mainboard (already 2 GPU was present)
dont power your riser with sata or molex to sata
he will work only with the usb cable linking the PCi and the riser?
no connect riser with molex or 6pin directly
don't have free 6 pin connector.
need to add one more alimentation to do that
riser was received with usb cable to link the pci slot to the card and 6 pin connector linked on the riser and output sata
see this ling they are the one i bought:
https://www.amazon.fr/dadaptateur-Amplifi%C3%A9e-dextension-dalimentation-Adaptateur/dp/B073MK1QWP/ref=sr_1_1?ie=UTF8&qid=1519200146&sr=8-1&keywords=riser+1x+16x
Re: HELP + REWARD - issue to add 3 GPU to my mainboard (already 2 GPU was present)
When adding new cards especially if you mix (nvida and amd) uninstall the drivers with DDU, and then reinstall the drivers. I'd also add each card in turn so you can work out if you have a bad riser or card. Also if you can test with 1 PSU to rule that out
all cards are functionning because i was using them previously on my computer.
i bought a RX 570 to replace the two R9 280x and then wanted to add the two R9 280 to my mining computer
all riser are working also tested each one by one
only both card not working together (ok for the 580 1050ti detected but crash every 5 min, and R9 280x not detected at all)
Re: HELP + REWARD - issue to add 3 GPU to my mainboard (already 2 GPU was present)
dont power your riser with sata or molex to sata
he will work only with the usb cable linking the PCi and the riser?
HELP + REWARD - issue to add 3 GPU to my mainboard (already 2 GPU was present)
Working help will be tipped when i will be able to mine
Good morning,
i hope you can help me, i'm trying to add 3GPU to my mining config but i'm facing somme issue ...
my hardware:
POWER: 700 WATT BRONZE + 650 WATT
Motherboard: MSI Z77A-G45 (UP to 3 Video card)
CPU: Intel Core I3 - 3220 @ 3.30GHZ
Memory: 16GO DDR3
Video card: 2x SAPPHIRE DUAL R9 280X 3GO DDR5 OC
2x MSI NVIDIA GFORCE GTX 1050TI 4GO OC
1X MSI RADEON RX580 8GO OC
hard disk: 300 GB WD Scorpio (probably a 5400 round) 2.5"
First config i have tried:
Rx 580 on PCIE 16X (Motherboard)
2x 1050 TI on PCIE 16x (Motberboard)
2x R9 280X on PCI 1x (with riser card 1x to 16x powered by sata) => https://www.amazon.fr/dadaptateur-Amplifi%C3%A9e-dextension-dalimentation-Adaptateur/dp/B073MK1QWP/ref=sr_1_1?ie=UTF8&qid=1519200146&sr=8-1&keywords=riser+1x+16x
700Watt was powering the mainboard (24 PIN + 2x 4 PIN CPU connector) and the two R9 280x (1x8 PIN + 1x6 PIN on each card).
This one was probably also powering the two 1050TI as they take power only from the PCI-E slots
650Watt was powering the RX580 (1x 8PIN), the two 1x-16x riser (6 pin on card > Sata on PSU) and the hard disk
Result: 2 cards detected (RX580 and 1 1050TI)
Mining: RX 580 => Was OK 1050Ti: where not detected by the miner
Second config i have tried:
removed temporarly the two R9 280x.
Rx 580 on PCIE 16X (Motherboard)
1x 1050 TI on PCIE 16x (Motberboard)
1x 1050 TI on on PCI 1x (with riser card 1x to 16x powered by sata) =>
https://www.amazon.fr/dadaptateur-Amplifi%C3%A9e-dextension-dalimentation-Adaptateur/dp/B073MK1QWP/ref=sr_1_1?ie=UTF8&qid=1519200146&sr=8-1&keywords=riser+1x+16x
700Watt was powering the mainboard (24 PIN + 2x 4 PIN CPU connector)
This one was probably also powering one 1050TI as they take power only from the PCI-E slots
650Watt was powering the RX580 (1x 8PIN), one 1x-16x riser (6 pin on card > Sata on PSU) with one 1050TI and the hard disk
Result: 3 cards detected (RX580 and 1 1050TI)
Mining: RX 580 => Was OK 1050Ti: both detected BUT always error while mining and loose of hash (with one card i'm at 14MHZ on ether and with two i'm at 11.500 MHZ each)
GPU 1, CUDA error 4 - cannot write buffer for DAG
GPU 0, GpuMiner cu_kd failed 4 (0), unspecified launch failure
GPU 0, Calc DAG failed!
GPU 1 failed
Setting DAG epoch #170 for GPU1
GPU 1, CUDA error 4 - cannot write buffer for DAG
Setting DAG epoch #170 for GPU0
GPU 0 failed
GPU 0, CUDA error 4 - cannot write buffer for DAG
ETH: 02/21/18-09:15:50 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 1 failed
GPU 0 failed
GPU0 t=19C fan=45%, GPU1 t=13C fan=45%
WATCHDOG: GPU error, you need to restart miner
Restarting OK, exit...
can you help to make everything working?
Do you think it's a power issue?
Riser are all working as i tested each separately with the 1050 TI
Thanks for reading and for help
Working help will be tipped when i will be able to mine
Good morning,
i hope you can help me, i'm trying to add 3GPU to my mining config but i'm facing somme issue ...
my hardware:
POWER: 700 WATT BRONZE + 650 WATT
Motherboard: MSI Z77A-G45 (UP to 3 Video card)
CPU: Intel Core I3 - 3220 @ 3.30GHZ
Memory: 16GO DDR3
Video card: 2x SAPPHIRE DUAL R9 280X 3GO DDR5 OC
2x MSI NVIDIA GFORCE GTX 1050TI 4GO OC
1X MSI RADEON RX580 8GO OC
hard disk: 300 GB WD Scorpio (probably a 5400 round) 2.5"
First config i have tried:
Rx 580 on PCIE 16X (Motherboard)
2x 1050 TI on PCIE 16x (Motberboard)
2x R9 280X on PCI 1x (with riser card 1x to 16x powered by sata) => https://www.amazon.fr/dadaptateur-Amplifi%C3%A9e-dextension-dalimentation-Adaptateur/dp/B073MK1QWP/ref=sr_1_1?ie=UTF8&qid=1519200146&sr=8-1&keywords=riser+1x+16x
700Watt was powering the mainboard (24 PIN + 2x 4 PIN CPU connector) and the two R9 280x (1x8 PIN + 1x6 PIN on each card).
This one was probably also powering the two 1050TI as they take power only from the PCI-E slots
650Watt was powering the RX580 (1x 8PIN), the two 1x-16x riser (6 pin on card > Sata on PSU) and the hard disk
Result: 2 cards detected (RX580 and 1 1050TI)
Mining: RX 580 => Was OK 1050Ti: where not detected by the miner
Second config i have tried:
removed temporarly the two R9 280x.
Rx 580 on PCIE 16X (Motherboard)
1x 1050 TI on PCIE 16x (Motberboard)
1x 1050 TI on on PCI 1x (with riser card 1x to 16x powered by sata) =>
https://www.amazon.fr/dadaptateur-Amplifi%C3%A9e-dextension-dalimentation-Adaptateur/dp/B073MK1QWP/ref=sr_1_1?ie=UTF8&qid=1519200146&sr=8-1&keywords=riser+1x+16x
700Watt was powering the mainboard (24 PIN + 2x 4 PIN CPU connector)
This one was probably also powering one 1050TI as they take power only from the PCI-E slots
650Watt was powering the RX580 (1x 8PIN), one 1x-16x riser (6 pin on card > Sata on PSU) with one 1050TI and the hard disk
Result: 3 cards detected (RX580 and 1 1050TI)
Mining: RX 580 => Was OK 1050Ti: both detected BUT always error while mining and loose of hash (with one card i'm at 14MHZ on ether and with two i'm at 11.500 MHZ each)
GPU 1, CUDA error 4 - cannot write buffer for DAG
GPU 0, GpuMiner cu_kd failed 4 (0), unspecified launch failure
GPU 0, Calc DAG failed!
GPU 1 failed
Setting DAG epoch #170 for GPU1
GPU 1, CUDA error 4 - cannot write buffer for DAG
Setting DAG epoch #170 for GPU0
GPU 0 failed
GPU 0, CUDA error 4 - cannot write buffer for DAG
ETH: 02/21/18-09:15:50 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU 1 failed
GPU 0 failed
GPU0 t=19C fan=45%, GPU1 t=13C fan=45%
WATCHDOG: GPU error, you need to restart miner
Restarting OK, exit...
can you help to make everything working?
Do you think it's a power issue?
Riser are all working as i tested each separately with the 1050 TI
Thanks for reading and for help
Working help will be tipped when i will be able to mine
Good afternoon everyone,
i'm facing a strange issue since i have formated my computer this morning. i'm mining with 2x SAPPHIRE R9 280X 3GB OC.
i was mining at 23MHZ (combined) on ETH + DEC
after the format of my computer i'm not able to mine anymore.
Error said:
EDIT: Now GPU0 is working again but not GPU1
can you help?
C:\Users\fpist\Desktop\Claymore 11.0 - SAPPHIRE R9 280X DUAL X 3GB OC DUAL ETH and DEC>EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xafc3df05a9100dab40b0cec2b240bf8b701286ac.SapphireR9280x/frederic.pistone@gmail.com -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal ccexperiment.r9280x -dpsw x -dcoin dcr -tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1030 -mclock 1500 -tstop 85 -dcri 20 -allcoins 1
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual GPU Miner - v11.0 ║
║ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is eth-eu1.nanopool.org:9999
DCR: 1 pool is specified
Main Decred pool is dcr-eu.coinmine.pl:2222
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...
AMD Cards available: 2
GPU #0: Tahiti (AMD Radeon R9 200 Series), 3072 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon 280X
GPU #1: Tahiti (AMD Radeon R9 200 Series), 3072 MB available, 32 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon 280X
POOL/SOLO version
GPU #0: algorithm ASM
GPU #1: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 2
ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <79.137.82.70> port 9999
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
ETH: Authorized
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
DCR: Stratum - connecting to 'dcr-eu.coinmine.pl' <145.239.9.112> port 2222
DCR: Stratum - Connected (dcr-eu.coinmine.pl:2222)
DCR: Authorized
Setting DAG epoch #170...
Setting DAG epoch #170 for GPU0
Setting DAG epoch #170 for GPU1
Create GPU buffer for GPU1
Create GPU buffer for GPU0
GPU1, OpenCL error -4 (0) - cannot create DAG on GPU
GPU 1 failed
Setting DAG epoch #170 for GPU1
GPU0 DAG creation time - 6230 ms
Setting DAG epoch #170 for GPU0 done
ETH: 02/18/18-13:26:59 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 02/18/18-13:26:59 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU1, OpenCL error -4 (0) - cannot create DAG on GPU
DCR: 02/18/18-13:27:00 - New job from dcr-eu.coinmine.pl:2222
GPU 1 failed
ETH: 02/18/18-13:27:06 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 11.193 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 11.193 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 223.862 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 223.862 Mh/s, GPU1 0.000 Mh/s
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...
Thank you
i'm facing a strange issue since i have formated my computer this morning. i'm mining with 2x SAPPHIRE R9 280X 3GB OC.
i was mining at 23MHZ (combined) on ETH + DEC
after the format of my computer i'm not able to mine anymore.
Error said:
EDIT: Now GPU0 is working again but not GPU1
can you help?
C:\Users\fpist\Desktop\Claymore 11.0 - SAPPHIRE R9 280X DUAL X 3GB OC DUAL ETH and DEC>EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xafc3df05a9100dab40b0cec2b240bf8b701286ac.SapphireR9280x/frederic.pistone@gmail.com -epsw x -dcoin dcr -dpool stratum+tcp://dcr-eu.coinmine.pl:2222 -dwal ccexperiment.r9280x -dpsw x -dcoin dcr -tstop 85 -tt 65 -fanmin 60 -fanmax 100 -cclock 1030 -mclock 1500 -tstop 85 -dcri 20 -allcoins 1
╔════════════════════════════════════════════════════════════════╗
║ Claymore's Dual GPU Miner - v11.0 ║
║ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ║
╚════════════════════════════════════════════════════════════════╝
ETH: 1 pool is specified
Main Ethereum pool is eth-eu1.nanopool.org:9999
DCR: 1 pool is specified
Main Decred pool is dcr-eu.coinmine.pl:2222
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...
AMD Cards available: 2
GPU #0: Tahiti (AMD Radeon R9 200 Series), 3072 MB available, 32 compute units (pci bus 1:0:0)
GPU #0 recognized as Radeon 280X
GPU #1: Tahiti (AMD Radeon R9 200 Series), 3072 MB available, 32 compute units (pci bus 3:0:0)
GPU #1 recognized as Radeon 280X
POOL/SOLO version
GPU #0: algorithm ASM
GPU #1: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 2
ETH: Stratum - connecting to 'eth-eu1.nanopool.org' <79.137.82.70> port 9999
ETH: Stratum - Connected (eth-eu1.nanopool.org:9999)
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
ETH: Authorized
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
DCR: Stratum - connecting to 'dcr-eu.coinmine.pl' <145.239.9.112> port 2222
DCR: Stratum - Connected (dcr-eu.coinmine.pl:2222)
DCR: Authorized
Setting DAG epoch #170...
Setting DAG epoch #170 for GPU0
Setting DAG epoch #170 for GPU1
Create GPU buffer for GPU1
Create GPU buffer for GPU0
GPU1, OpenCL error -4 (0) - cannot create DAG on GPU
GPU 1 failed
Setting DAG epoch #170 for GPU1
GPU0 DAG creation time - 6230 ms
Setting DAG epoch #170 for GPU0 done
ETH: 02/18/18-13:26:59 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
ETH: 02/18/18-13:26:59 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s
GPU1, OpenCL error -4 (0) - cannot create DAG on GPU
DCR: 02/18/18-13:27:00 - New job from dcr-eu.coinmine.pl:2222
GPU 1 failed
ETH: 02/18/18-13:27:06 - New job from eth-eu1.nanopool.org:9999
ETH - Total Speed: 11.193 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 11.193 Mh/s, GPU1 0.000 Mh/s
DCR - Total Speed: 223.862 Mh/s, Total Shares: 0, Rejected: 0
DCR: GPU0 223.862 Mh/s, GPU1 0.000 Mh/s
WATCHDOG: GPU error, you need to restart miner
Quit, please wait...
Restarting OK, exit...
Thank you
Re: help to upgrade old mining computers + other questions
you already have 7 PCIE slots, not 3
indeed after a quick check
i have 3x PCI-E 16x and 4x PCI-E 1x
so only riser will be enought
thanks
Re: help to upgrade old mining computers + other questions
can you show me pics or name of kind of riser i need to have more pci-e slot on my computer?
only one i found seems to be just an extender not a multiplier.
i'm interested on extending my 3 slots to seven.
Actually i have 3 cards and 4 more are comming.
Thank you
only one i found seems to be just an extender not a multiplier.
i'm interested on extending my 3 slots to seven.
Actually i have 3 cards and 4 more are comming.
Thank you
Hello,
i have simple question regarding the dual mining instead single mining.
Currently my configuration is this one:
1X RX 580 8GB => Dual mining ETH and DEC for around 30MHZ in ETH and 900 MHZ in DEC
1X GTX 1050 TI 4GB => Dual mining ETH and DEC for around 14MHZ in ETH and 300 MHZ in DEC
1x R7 360 2GB => Mining XMR via the minergate GIU (because i'm not able to use this one with claymore - Not able to create DAG files)
So waht's the best? only mining ETH or double mining?
while double mining do i loose some ETH share?
high DCRI will reduce perf to obtain ETH share or doesn't matter?
thank you for reply
have a nice day
Best regards
Frederic
i have simple question regarding the dual mining instead single mining.
Currently my configuration is this one:
1X RX 580 8GB => Dual mining ETH and DEC for around 30MHZ in ETH and 900 MHZ in DEC
1X GTX 1050 TI 4GB => Dual mining ETH and DEC for around 14MHZ in ETH and 300 MHZ in DEC
1x R7 360 2GB => Mining XMR via the minergate GIU (because i'm not able to use this one with claymore - Not able to create DAG files)
So waht's the best? only mining ETH or double mining?
while double mining do i loose some ETH share?
high DCRI will reduce perf to obtain ETH share or doesn't matter?
thank you for reply
have a nice day
Best regards
Frederic
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
My MSI NVIDIA GTX 1050 TI is not recognised as CUDA.
Claymore tell me there's 1 NVIDIA Card but no CUDA (this card works well with minergate but i want claymore)
what can i do?
Thank you
Tried Claymore 10.06 and Claymore 11.0
I'm on windows 10 latest update
I have the latest NVIDIA Driver
tested with the exe from cuda 6.5/7.5/9.1
https://ibb.co/crpsJx
Claymore tell me there's 1 NVIDIA Card but no CUDA (this card works well with minergate but i want claymore)
what can i do?
Thank you
Tried Claymore 10.06 and Claymore 11.0
I'm on windows 10 latest update
I have the latest NVIDIA Driver
tested with the exe from cuda 6.5/7.5/9.1
https://ibb.co/crpsJx
Good morning,
i don't know if the right place to ask, but i have an issue with Claymore ...
I'm currently mining with 3 Cards
1 MSI RX 580 Armor 8GB OC
1 MSI R7 360 2GB
1 MSI NVIDIA GTX 1050TI
with the RX580 i mine with Claymore 11.0 Ether and DCR (i ask claymore to use a specifc GPU)
with the R7 360 as i'm unable to use it with Claymore to mine XMR i use Minergate GUI
for the 1050 TI i want to use also Claymore to mine Ether and DCR (on another folder with other parameters, ...) but he see only AMD cards ...
The card is working as i can use it on Minergate GUI if i want (but i don't like really minergate and prefeer to mine on nanopool for ETH and coinmine for DCR)
do you know why i'm facing this issue?
Thank you for your help
Best regards
CCexperiment
i don't know if the right place to ask, but i have an issue with Claymore ...
I'm currently mining with 3 Cards
1 MSI RX 580 Armor 8GB OC
1 MSI R7 360 2GB
1 MSI NVIDIA GTX 1050TI
with the RX580 i mine with Claymore 11.0 Ether and DCR (i ask claymore to use a specifc GPU)
with the R7 360 as i'm unable to use it with Claymore to mine XMR i use Minergate GUI
for the 1050 TI i want to use also Claymore to mine Ether and DCR (on another folder with other parameters, ...) but he see only AMD cards ...
The card is working as i can use it on Minergate GUI if i want (but i don't like really minergate and prefeer to mine on nanopool for ETH and coinmine for DCR)
do you know why i'm facing this issue?
Thank you for your help
Best regards
CCexperiment