Search content
Sort by
Showing 20 of 86 results by celofan
Zfast miner not working with any pool excluding miningpoolhub!
With new megaminer-master, zfast miner starts normally first time when it connect to miningpoolhub.
After that if other pool have best profit for zcoin (maybe ahashpool,maybe nicehash), zfast miner starts two times and after that zcoin is not shown on sorting table.
And profit calculation works only for first string.
Some miners are outdated (excavator, z-enemy etc).
When we can see new release of megaminer?
With new megaminer-master, zfast miner starts normally first time when it connect to miningpoolhub.
After that if other pool have best profit for zcoin (maybe ahashpool,maybe nicehash), zfast miner starts two times and after that zcoin is not shown on sorting table.
And profit calculation works only for first string.
Some miners are outdated (excavator, z-enemy etc).
When we can see new release of megaminer?
2. Ethlargement pill works not only for ethereum, for cryptonight algo's too.So can you add autostart ethlargement pill when cryptonight algo starts (for Nvidia Cards)?
Doesn't it just start if you have @@ETHLARGEMENTPILL=REVB(REVA) in config.txt?All is O.K. now
A few wishes for the next releases of the megaminer.
Some miners not work with some pools.For example: zfast miner is a best miner for zcoin minig but it is a fork optimized for miningpoolhub only. And in the same time new releases of excavator not works with miningpoolhub due to change stratum protocol supported.Can you sort the miners on the list of the best miners specifically for a particular pool? For example: zfast miner works with miningpoolhub but not works with ahashpool and nicehash, so for miningpoolhub zcoin mining will use zfast miner and for ahashpool and nicehash will use tpruvot etc? For lyra2v2 best results for miningpoolhub have by tpruvot miner with -submit stale option, but the best results for ahashpool and nicehash will be with excavator miner.Sorting miners for specific pools will increase profitability!
Some miners not work with some pools.For example: zfast miner is a best miner for zcoin minig but it is a fork optimized for miningpoolhub only. And in the same time new releases of excavator not works with miningpoolhub due to change stratum protocol supported.Can you sort the miners on the list of the best miners specifically for a particular pool? For example: zfast miner works with miningpoolhub but not works with ahashpool and nicehash, so for miningpoolhub zcoin mining will use zfast miner and for ahashpool and nicehash will use tpruvot etc? For lyra2v2 best results for miningpoolhub have by tpruvot miner with -submit stale option, but the best results for ahashpool and nicehash will be with excavator miner.Sorting miners for specific pools will increase profitability!
Please, tell me the correct filling of the cost of electricity at two cost zones.
In MM for example presents next string: [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]
I have a day zone from 7-00 to 23-00 cost 0.000006 btc and night zone from 23-00 to 7-00 cost 0.000003 btc
So how i can correct fill it?
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":23,"HourEnd":7,"CostKwh":0.000003}]
or
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":00,"HourEnd":6,"CostKwh":0.000003}] ?
Or any other way with minutes?
And how many digits is correct value?
I.e. correct is 7 or 07 or doesn't matter?
And how MM will calculate 00 hours?
Tnx.
In MM for example presents next string: [{"HourStart":12,"HourEnd":21,"CostKwh":0.105609},{"HourStart":22,"HourEnd":11,"CostKwh":0.703759}]
I have a day zone from 7-00 to 23-00 cost 0.000006 btc and night zone from 23-00 to 7-00 cost 0.000003 btc
So how i can correct fill it?
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":23,"HourEnd":7,"CostKwh":0.000003}]
or
@@ELECTRICITYCOST=[{"HourStart":7,"HourEnd":23,"CostKwh":0.000006},{"HourStart":00,"HourEnd":6,"CostKwh":0.000003}] ?
Or any other way with minutes?
And how many digits is correct value?
I.e. correct is 7 or 07 or doesn't matter?
And how MM will calculate 00 hours?
Tnx.
After several tests I can say that there are certain problems with the excavator. When using an excavator on those algorithms that are supported by miningpoolhub, we get zero speed.
Therefore, you need to either force the excavator to work with miningpoolhub, or delete the algorithms that support miningpoolhub in the * .json file if you want use miningpoolhub.
Then I again ask you to include in the next release the miner from palgin for neoscrypt and hsr algos https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Because palgin the best miner at neoscrypt algo for pascal based cards and it works with miningpoolhub
Therefore, you need to either force the excavator to work with miningpoolhub, or delete the algorithms that support miningpoolhub in the * .json file if you want use miningpoolhub.
Then I again ask you to include in the next release the miner from palgin for neoscrypt and hsr algos https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Because palgin the best miner at neoscrypt algo for pascal based cards and it works with miningpoolhub
Palgin miner for neoscrypt is included in additional miners folder
WOW
I definitely need to rest
Sorry for my blindness
Thank you, I will test it.
UPD Working but show next message on screen: + CategoryInfo : ObjectNotFound: (C:\Megaminer-6.0b1\Wrapper_4068.txt:String) [Get-Content], ItemNotFoundException
UPD2 Not working
strange profit and speed showed+ CategoryInfo : ObjectNotFound: (C:\Megaminer-6.0b1\Wrapper_4068.txt:String) [Get-Content], ItemNotFoundException
GroupName MMPowLmt LocalSpeed Rev./Day Rev./Day Profit/Day Algorithm Coin Miner Power Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- --------- ---- ----- ----- ---------- --------- ------- ---- ----
3x1080ti 0.0 ph/s 0.00000btc 0.0036 0.0036 NEOSCRYPT neoscrypt N-PalginNeoWrap 589W 0.0 ph/W 0.0 ph/s 1103 US AHASH
UPD3 Working with N-PalginNeo.json file from "Not Compatibles with more than one gpu group of same type" directory
After several tests I can say that there are certain problems with the excavator. When using an excavator on those algorithms that are supported by miningpoolhub, we get zero speed.
Therefore, you need to either force the excavator to work with miningpoolhub, or delete the algorithms that support miningpoolhub in the * .json file if you want use miningpoolhub.
Then I again ask you to include in the next release the miner from palgin for neoscrypt and hsr algos https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Because palgin the best miner at neoscrypt algo for pascal based cards and it works with miningpoolhub
Therefore, you need to either force the excavator to work with miningpoolhub, or delete the algorithms that support miningpoolhub in the * .json file if you want use miningpoolhub.
Then I again ask you to include in the next release the miner from palgin for neoscrypt and hsr algos https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Because palgin the best miner at neoscrypt algo for pascal based cards and it works with miningpoolhub
Very unstable release for me.
1. ccminer alexis not working, but in release 5.2 alexis worrking stable.Copy ccminer alexis from 5.2 to 6.0b1 solve this problem.
2. Restarts intervals.I.e. miner starts and interval is 600sec. When 60-70-80-90sec ends, miner can restart with new interval count value.
3. Never ends benchmark (after closing MM and starts it again some miners can start benchmark again).
4. Excavator can't mine neoscrypt algo (when added in json file)."Cuda ERROR - Not enough of memory" message shown, but the same release of excavator separately works for me.
And how i can disable miningpoolhub for excavator only? It works for nicehash perfectly.
5. Can you add palgin hsr miner in next release? https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows , https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Excavator and palgin hsr miners are the best neoscrypt miners for Nvidia pascal based cards (compared with Klaust - about 10% difference).
Thank you!
1. ccminer alexis not working, but in release 5.2 alexis worrking stable.Copy ccminer alexis from 5.2 to 6.0b1 solve this problem.
2. Restarts intervals.I.e. miner starts and interval is 600sec. When 60-70-80-90sec ends, miner can restart with new interval count value.
3. Never ends benchmark (after closing MM and starts it again some miners can start benchmark again).
4. Excavator can't mine neoscrypt algo (when added in json file)."Cuda ERROR - Not enough of memory" message shown, but the same release of excavator separately works for me.
And how i can disable miningpoolhub for excavator only? It works for nicehash perfectly.
5. Can you add palgin hsr miner in next release? https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows , https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Excavator and palgin hsr miners are the best neoscrypt miners for Nvidia pascal based cards (compared with Klaust - about 10% difference).
Thank you!
1. I think no changes for alexis, did you copy miner file or bin content?
ccminer.exe only file
4. Compare json entrance file pls to see differences.
Solved by deleting doubled {"id":1,"method":"worker.add","params":["0","#GPUID#"]} string in ExcavatorPattern.txt file in pattern directory
5. It is in Additional miners, read changelog before, this miner is a little....
After excavator works stable no need palginpaw miner because best hashrate.
Did you disable miningpoolhub mining for excavator because 0.000000 hashrate?
P.S> aaronsace solved this issue in multipoolminer https://github.com/MultiPoolMiner/MultiPoolMiner/releases
Excavator works with miningpoolhub
Very unstable release for me.
1. ccminer alexis not working, but in release 5.2 alexis worrking stable.Copy ccminer alexis from 5.2 to 6.0b1 solve this problem.
2. Restarts intervals.I.e. miner starts and interval is 600sec. When 60-70-80-90sec ends, miner can restart with new interval count value.
3. Never ends benchmark (after closing MM and starts it again some miners can start benchmark again).
4. Excavator can't mine neoscrypt algo (when added in json file)."Cuda ERROR - Not enough of memory" message shown, but the same release of excavator separately works for me.
And how i can disable miningpoolhub for excavator only? It works for nicehash perfectly.
5. Can you add palgin hsr miner in next release? https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows , https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Excavator and palgin hsr miners are the best neoscrypt miners for Nvidia pascal based cards (compared with Klaust - about 10% difference).
Thank you!
1. ccminer alexis not working, but in release 5.2 alexis worrking stable.Copy ccminer alexis from 5.2 to 6.0b1 solve this problem.
2. Restarts intervals.I.e. miner starts and interval is 600sec. When 60-70-80-90sec ends, miner can restart with new interval count value.
3. Never ends benchmark (after closing MM and starts it again some miners can start benchmark again).
4. Excavator can't mine neoscrypt algo (when added in json file)."Cuda ERROR - Not enough of memory" message shown, but the same release of excavator separately works for me.
And how i can disable miningpoolhub for excavator only? It works for nicehash perfectly.
5. Can you add palgin hsr miner in next release? https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows , https://github.com/palginpav/hsrminer/tree/master/HSR%20algo/Windows
Excavator and palgin hsr miners are the best neoscrypt miners for Nvidia pascal based cards (compared with Klaust - about 10% difference).
Thank you!
6.0 b1
No power information for skein and x11gost algo
GroupName MMPowLmt LocalSpeed Rev./Day Rev./Day Profit/Day Algorithm Coin Miner Power Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- --------- ---- ----- ----- ---------- --------- ------- ---- ----
NVIDIA 2.8 gh/s 0.00094btc 8.6736 8.6736 SKEIN digibyte N-CcminerPolytmos W ∞ ph/W 0.0 ph/s Europe MPH
No power information for skein and x11gost algo
GroupName MMPowLmt LocalSpeed Rev./Day Rev./Day Profit/Day Algorithm Coin Miner Power Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- --------- ---- ----- ----- ---------- --------- ------- ---- ----
NVIDIA 2.8 gh/s 0.00094btc 8.6736 8.6736 SKEIN digibyte N-CcminerPolytmos W ∞ ph/W 0.0 ph/s Europe MPH
See "Currents" screen, power is card level not algo level. What gpu name do you have?
EVGA 1080ti FTW3
UPD:This screen only was if Ccminer-polytmos used.
If any other miner works-no errors, power and efficiency fields show all values correctly.
P.S. Under benchmark only
6.0 b1
No power information for skein and x11gost algo
GroupName MMPowLmt LocalSpeed Rev./Day Rev./Day Profit/Day Algorithm Coin Miner Power Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- --------- ---- ----- ----- ---------- --------- ------- ---- ----
NVIDIA 2.8 gh/s 0.00094btc 8.6736 8.6736 SKEIN digibyte N-CcminerPolytmos W ∞ ph/W 0.0 ph/s Europe MPH
No power information for skein and x11gost algo
GroupName MMPowLmt LocalSpeed Rev./Day Rev./Day Profit/Day Algorithm Coin Miner Power Efficiency PoolSpeed Workers Loc. Pool
--------- -------- ---------- -------- -------- ---------- --------- ---- ----- ----- ---------- --------- ------- ---- ----
NVIDIA 2.8 gh/s 0.00094btc 8.6736 8.6736 SKEIN digibyte N-CcminerPolytmos W ∞ ph/W 0.0 ph/s Europe MPH
I will have two requests for the next release.
1.Leave the @@ PERCENTTOSWITCH function as a toggled option so that it can be turned on or off manually.Because in some people it works stably and shows a real increase in profit, especially for a month.
2.Include in the next release hsr miner for nvidia pascal cards: https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
This is the best neoscrypt algo miner for pascal cards. On my 1080ti cards klaust 8.19 - 1,5mh/s, hsr miner - 1,8mh/s per card.
1.Leave the @@ PERCENTTOSWITCH function as a toggled option so that it can be turned on or off manually.Because in some people it works stably and shows a real increase in profit, especially for a month.
2.Include in the next release hsr miner for nvidia pascal cards: https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
This is the best neoscrypt algo miner for pascal cards. On my 1080ti cards klaust 8.19 - 1,5mh/s, hsr miner - 1,8mh/s per card.
1. I Dont understand, you can set to zero.
2. It will be included
Oh,my god!
Not @@PERCENTTOSWITCH, but @@DELAYCLOSEMINERS
Sorry for mistake!
I will have two requests for the next release.
1.Leave the @@ PERCENTTOSWITCH function as a toggled option so that it can be turned on or off manually.Because in some people it works stably and shows a real increase in profit, especially for a month.
2.Include in the next release hsr miner for nvidia pascal cards: https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
This is the best neoscrypt algo miner for pascal cards. On my 1080ti cards klaust 8.19 - 1,5mh/s, hsr miner - 1,8mh/s per card.
1.Leave the @@ PERCENTTOSWITCH function as a toggled option so that it can be turned on or off manually.Because in some people it works stably and shows a real increase in profit, especially for a month.
2.Include in the next release hsr miner for nvidia pascal cards: https://github.com/palginpav/hsrminer/tree/master/Neoscrypt%20algo/Windows
This is the best neoscrypt algo miner for pascal cards. On my 1080ti cards klaust 8.19 - 1,5mh/s, hsr miner - 1,8mh/s per card.
Re: Gateless Gate Sharp 0.0.13 beta: zawawa's open-source ETH/XMR miner
Gateless Gate Sharp 0.0.13 beta
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.13-beta
* Added missing DLL's.
Phew!
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.13-beta
* Added missing DLL's.
Phew!
No changes.
The same as previous screen
This is really odd... You are not using a 32-bit Windows, right?
Could you show me the content of the following folders?
C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp
C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\x64
C:\Program Files\Zawawa Software LLC\Gateless Gate Sharp\x86
https://photos.app.goo.gl/WKNUv7g9ixOxEBVp1
https://photos.app.goo.gl/b07Dzep0uZktcvzw1
Re: Gateless Gate Sharp 0.0.13 beta: zawawa's open-source ETH/XMR miner
Gateless Gate Sharp 0.0.13 beta
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.13-beta
* Added missing DLL's.
Phew!
https://github.com/zawawawa/GatelessGateSharp/releases/tag/v0.0.13-beta
* Added missing DLL's.
Phew!
No changes.
The same as previous screen
Re: Gateless Gate Sharp 0.0.12 beta: zawawa's open-source ETH/XMR miner
Re: Gateless Gate Sharp 0.0.10 beta: zawawa's open-source ETH/XMR miner
Not working
can't load SQLiteInterop.dll
0.0.10 beta
Win 10 x64
1080ti 3x
https://photos.google.com/share/AF1QipOXR4iZPi6R0WBoExqIj8cDQMJsmLcCIc5dC9ob26wSIktihThKkjn3XbehDeZxmg/photo/AF1QipP3acBXbVjfRlOeTB1yyzdWLkWS0WWGGqfrXogj?key=QVc0eDF5MmN3VmZvM191OXR2OTh6ZnVNOWlTdF93
can't load SQLiteInterop.dll
0.0.10 beta
Win 10 x64
1080ti 3x
https://photos.google.com/share/AF1QipOXR4iZPi6R0WBoExqIj8cDQMJsmLcCIc5dC9ob26wSIktihThKkjn3XbehDeZxmg/photo/AF1QipP3acBXbVjfRlOeTB1yyzdWLkWS0WWGGqfrXogj?key=QVc0eDF5MmN3VmZvM191OXR2OTh6ZnVNOWlTdF93
Not working
Message shown Unable to load DLL 'SQLite.Interop.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
GGS 0.0.4-0.0.6 the same trouble.
Win 10 x64
Message shown Unable to load DLL 'SQLite.Interop.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E)
GGS 0.0.4-0.0.6 the same trouble.
Win 10 x64
Re: Megaminer - Multi pool (8 pools) / Multi Algo (>20) launcher
-----------------------------------------------------------------------------------------------------------------------
(E)nd Interval (P)rofits (C)urrent (H)istory (W)allets | Next Interval: 280 secs
-----------------------------------------------------------------------------------------------------------------------
------------------------------------------------ACTIVE MINERS----------------------------------------------------------
Speed BTC/Day USD/Day Algorithm Coin Miner Pool Location PoolWorkers
----- ------- ------- --------- ---- ----- ---- -------- -----------
9.70 MHs 0.00198 11.21 LYRA2Z zcoin ccminerNanashi MPH US
----------------------------------------------------PROFITS------------------------------------------------------------
(B)est Miners/All (T)op 40/All
Algorithm Coin Miner Speed BTC/Day USD/Day Pool Location
--------- ---- ----- ----- ------- ------- ---- --------
TRIBUS CcminerTpruvot 279.46 MH/s 0.00482 27.31 H.RFRY US
X17 ccminerAlexis78 46.95 MH/s 0.00246 13.97 ZPOOL US
PHI CcminerTpruvot 90.87 MH/s 0.00197 11.16 ZPOOL US
LYRA2Z zcoin ccminerNanashi 9.31 MH/s 0.00190 10.76 MPH US
LYRA2Z zcoin ccminerDJM34 9.26 MH/s 0.00189 10.70 MPH US
VELTOR ccminerAlexis78 158.90 MH/s 0.00183 10.38 ZPOOL US
Anyone tells me how it possible?
Megaminer buzz 4.6
Best algo is tribus but lyra2z still mining
WTF?
(E)nd Interval (P)rofits (C)urrent (H)istory (W)allets | Next Interval: 280 secs
-----------------------------------------------------------------------------------------------------------------------
------------------------------------------------ACTIVE MINERS----------------------------------------------------------
Speed BTC/Day USD/Day Algorithm Coin Miner Pool Location PoolWorkers
----- ------- ------- --------- ---- ----- ---- -------- -----------
9.70 MHs 0.00198 11.21 LYRA2Z zcoin ccminerNanashi MPH US
----------------------------------------------------PROFITS------------------------------------------------------------
(B)est Miners/All (T)op 40/All
Algorithm Coin Miner Speed BTC/Day USD/Day Pool Location
--------- ---- ----- ----- ------- ------- ---- --------
TRIBUS CcminerTpruvot 279.46 MH/s 0.00482 27.31 H.RFRY US
X17 ccminerAlexis78 46.95 MH/s 0.00246 13.97 ZPOOL US
PHI CcminerTpruvot 90.87 MH/s 0.00197 11.16 ZPOOL US
LYRA2Z zcoin ccminerNanashi 9.31 MH/s 0.00190 10.76 MPH US
LYRA2Z zcoin ccminerDJM34 9.26 MH/s 0.00189 10.70 MPH US
VELTOR ccminerAlexis78 158.90 MH/s 0.00183 10.38 ZPOOL US
Anyone tells me how it possible?
Megaminer buzz 4.6
Best algo is tribus but lyra2z still mining
WTF?
Re: Megaminer - Multi pool (8 pools) / Multi Algo (>20) launcher
Tutulfo, i have a question about count time interval realisation in megaminer.
I have two small farm on 1080ti, and i run a megaminer on them at the same time, (plus or minus 3-4 seconds), but after a while there is a desynchronization in time.
A field "Next Interval" shows me different time in seconds, and by this, two different farms have two different API answer, and two different algos mined.
Is it possible to implement a seconds counter with binding to hardware, such as RTC clock etc?
I have two small farm on 1080ti, and i run a megaminer on them at the same time, (plus or minus 3-4 seconds), but after a while there is a desynchronization in time.
A field "Next Interval" shows me different time in seconds, and by this, two different farms have two different API answer, and two different algos mined.
Is it possible to implement a seconds counter with binding to hardware, such as RTC clock etc?
What utility has all rig are syncronized?
Two PC, one monitor, and teamViewer.
When time in "next interval" window ends, i start megaminer on the second PC.
No more.
After a few minutes both timers have different values in "next interval" window.
It is not 4-5 sec, it is 200-300 sec difference between rigs.