Search content
Sort by
Showing 7 of 7 results by cervajz
Re: miniZ, a new fast and friendly Equihash <144,5><150,5><192,7><96,5> Cuda miner.
Hi, great Beam hashrate, but I have lot of rejects (20-30%) on nicehash on poolside.
Gminer, and Bimer are slower, but without rejects
Hi cervajz,Gminer, and Bimer are slower, but without rejects
Thanks for reporting this, we will look into this.
Could you tell us which GPUs are you using?
Also could you post here a bit of miniZ log? Or a bit of the console output.
Cheers
I have rtx 2080ti and 2070
GTX 1070ti and 1070
Drivers 430.39 and 419.35
log:
[ 0d 0h 5m10s] 0>RTX 2080 Ti 100% [61řC/37%]*25.42 I/s 50.0(50.0)Sol/s 179(178.7)W clk=1410MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 5m20s] 0>RTX 2080 Ti 100% [61řC/35%] 25.39 I/s 50.0(50.0)Sol/s 177(178.5)W clk=1515MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 5m30s] 0>RTX 2080 Ti 100% [61řC/37%] 25.38 I/s 50.3(50.2)Sol/s 180(178.8)W clk=1485MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 5m40s] 0>RTX 2080 Ti 100% [62řC/38%] 25.37 I/s 50.3(50.2)Sol/s 181(179.0)W clk=1470MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 5m50s] 0>RTX 2080 Ti 100% [62řC/38%] 25.33 I/s 50.0(50.1)Sol/s 182(179.2)W clk=1440MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 6m00s] 0>RTX 2080 Ti 100% [61řC/34%]*25.33 I/s 50.1(50.1)Sol/s 175(178.6)W clk=1485MHz mclk=7299MHz Sol/W=0.28- 47ms
[ 0d 0h 6m10s] 0>RTX 2080 Ti 100% [62řC/34%]*25.33 I/s 50.1(50.1)Sol/s 177(178.6)W clk=1485MHz mclk=7299MHz Sol/W=0.28- 54ms
[ 0d 0h 6m20s] 0>RTX 2080 Ti 100% [62řC/38%]*25.34 I/s 50.3(50.2)Sol/s 179(178.8)W clk=1500MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 6m30s] 0>RTX 2080 Ti 100% [62řC/38%]*25.35 I/s 50.1(50.1)Sol/s 179(178.7)W clk=1395MHz mclk=7299MHz Sol/W=0.28- 61ms
[ 0d 0h 6m40s] 0>RTX 2080 Ti 100% [62řC/35%]*25.33 I/s 50.1(50.1)Sol/s 178(178.7)W clk=1485MHz mclk=7299MHz Sol/W=0.28- 57ms
[ 0d 0h 6m50s] 0>RTX 2080 Ti 100% [62řC/34%]*25.32 I/s 49.9(50.0)Sol/s 181(178.9)W clk=1410MHz mclk=7299MHz Sol/W=0.28- 53ms
[ 0d 0h 7m00s] 0>RTX 2080 Ti 100% [62řC/38%]*25.31 I/s 49.8(50.0)Sol/s 180(178.9)W clk=1380MHz mclk=7299MHz Sol/W=0.28- 52ms
[ 0d 0h 7m10s] 0>RTX 2080 Ti 100% [62řC/37%] 25.30 I/s 49.8(50.0)Sol/s 179(178.9)W clk=1485MHz mclk=7299MHz Sol/W=0.28- 52ms
[ 0d 0h 7m20s] 0>RTX 2080 Ti 100% [62řC/34%]*25.27 I/s 50.1(50.1)Sol/s 179(178.9)W clk=1440MHz mclk=7299MHz Sol/W=0.28- 55ms
[ 0d 0h 7m30s] 0>RTX 2080 Ti 100% [62řC/37%]*25.26 I/s 49.9(50.0)Sol/s 180(178.9)W clk=1395MHz mclk=7299MHz Sol/W=0.28- 48ms
[ 0d 0h 7m40s] 0>RTX 2080 Ti 100% [62řC/38%]*25.26 I/s 49.9(50.0)Sol/s 181(179.1)W clk=1485MHz mclk=7299MHz Sol/W=0.28- 51ms
I had 6-10% rejected shares on pool during this log.
Re: [ANN]Bminer: a fast Equihash/Ethash/CuckooCycle miner for AMD/NVIDIA GPUs 12.1.0
12.2 lite 2080ti - 8 G/s
13.0 lite 2080ti - 3 G/s
13.0 lite 2080ti - 3 G/s
RTX 2070 :-(
12.2 lite 5.1G/s
13.0 lite 1.75G/s
GTX - whoo whoooo :-D 1070/ti > 25-30% boost
Hi, i now testing compare with dstm, and it seems this miner is a few percent faster like others said. But on some rigs i have problem, that some GPUs are not load at full.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
My guess is that the temperature might be too high --- can you please share some screenshots of the UI and the results of nvidia-smi?
I dont think there is a problem with temperature, because other miner havent this problem with same settings, here si screen.
https://ibb.co/g20shG
https://ibb.co/jiGnGb
and rig with 3x1070ti + 1x1070 + 2x1060 3GB
DSTM http://ibb.co/gaTqmb
Bminer http://ibb.co/khbMsG
Same problem with 3 1080ti
First GPU says 99% Utilization, other only 90%
Screen: https://ibb.co/ntmipw
May I know which versions of Windows are you using?
There are some combinations of driver versions and Windows 10 that will slow down the GPU commands. It is not happening on every configuration but I'm trying to mitigate the issue.
The Linux version does not have this problem.
Windows 10 Pro x64 1709, latest updatest. Drivers on some rigs - 388.13, 388.59. 388.71. I tried clean install of driver, no changes, problem is only with bminer, others are 99-100% load on gpu.
HW is different, Asus Z270p + Celeron G3930, or Gigabyte B250-HD3P+Pentium G4560 and other
Hi, i now testing compare with dstm, and it seems this miner is a few percent faster like others said. But on some rigs i have problem, that some GPUs are not load at full.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
My guess is that the temperature might be too high --- can you please share some screenshots of the UI and the results of nvidia-smi?
I dont think there is a problem with temperature, because other miner havent this problem with same settings, here si screen.
https://ibb.co/g20shG
https://ibb.co/jiGnGb
and rig with 3x1070ti + 1x1070 + 2x1060 3GB
DSTM http://ibb.co/gaTqmb
Bminer http://ibb.co/khbMsG
Hi, i now testing compare with dstm, and it seems this miner is a few percent faster like others said. But on some rigs i have problem, that some GPUs are not load at full.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
example, rig with 3x1070 with dstm all GPUs are on 99-100%, but with Bminer, only GPU 0 and 2 are on this. GPU1 is only 94% load
On rig with 4x1070 GPU 0,1 and 3 at full load, but GPU2 again only 94%
Like i said, with dstm or ewbf are all gpus at full load, no other change.
p.s. on 1070ti... this is awesome, where i had 480 with dstm, with bminer i have 500sols, awesome. But again, on rig with 4x1070ti+2x1060 I have problem, that some gpus are not at full load and all rig is slower compare with dstm wgich is ok.
I have no idea where can be problem.
Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.3 (Linux / Windows)
Hi, first thanks for perfect miner.
I have problem with 0.5.3 (0.5.2 is OK)
On one PC (gaming) 1x1080+1x1070 i using two bat files for each gpu.
I can kill one if play game (second stil running), and start again after that.
But in 0.5.3 there is problem, that i cant run 2 bat files. Second always crashed.
Tried it on another rig and same problem.
If i run only one bat (doesnt matter if 1 or 2 gpu setup) is ok.
Windows 10 x64 fall update, i7-7700k, 16gb ram
I have problem with 0.5.3 (0.5.2 is OK)
On one PC (gaming) 1x1080+1x1070 i using two bat files for each gpu.
I can kill one if play game (second stil running), and start again after that.
But in 0.5.3 there is problem, that i cant run 2 bat files. Second always crashed.
Tried it on another rig and same problem.
If i run only one bat (doesnt matter if 1 or 2 gpu setup) is ok.
Windows 10 x64 fall update, i7-7700k, 16gb ram