Search content
Sort by
Showing 20 of 59 results by chudm
New project for miners, absolute free, this project development "ETHlargement" - EthereumPill release
Support Algo: Ethash/KawPow/ProgPow
Download: https://ethereumpill.info/ProjectEthereumPill.zip
Virustotal: https://www.virustotal.com/gui/file/e01cb7c04a499391150945dd956c2c29cf98ef043a9a13ebefa71297cb102c08/detection
Hashrate:
Nvidia
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s
AMD
RX470 8gb - 35 mh/s
RX480 8gb - 37 mh/s
RX580 8gb - 40 mh/s
Vega56 - 46 mh/s
Vega64 - 52 mh/s
RX5500 XT - 60 mh/s
RX5600 XT - 64 mh/s
RX5700 XT - 67 mh/s
P.S.: the project is being drowned by competitors, don't trust anyone, check the information yourself
Support Algo: Ethash/KawPow/ProgPow
Download: https://ethereumpill.info/ProjectEthereumPill.zip
Virustotal: https://www.virustotal.com/gui/file/e01cb7c04a499391150945dd956c2c29cf98ef043a9a13ebefa71297cb102c08/detection
Hashrate:
Nvidia
1080ti - 58 mh/s
2060 - 59 mh/s
2070 - 60-62 mh/s
2080 - 63-67 mh/s
2080ti - 68-71 mh/s
3070 - 76-78 mh/s
3080 - 97-99 mh/s
3090 - 115-127 mh/s
AMD
RX470 8gb - 35 mh/s
RX480 8gb - 37 mh/s
RX580 8gb - 40 mh/s
Vega56 - 46 mh/s
Vega64 - 52 mh/s
RX5500 XT - 60 mh/s
RX5600 XT - 64 mh/s
RX5700 XT - 67 mh/s
P.S.: the project is being drowned by competitors, don't trust anyone, check the information yourself
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.9 (Windows/Linux)
v11.9:
- fixed issue with incorrect shares for Keccak.
- fixed issue with incorrect shares for Keccak.
Working fine here.
Thank you!
Can you share what pool are you using for Keccak, im always getting no shares or proxy errors
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
"-dpsw XVG-blake2s" on zpool is wrong
Read all the instructions on the homepage, specifically the part about c=
Read all the instructions on the homepage, specifically the part about c=
Hi,
I already fixed it.
But thank you anyway
Regards,
Nestade
That means c=XVG that you will receive xvg right? so if i want to receive btc it should be c=BTC ? thanks
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.0 (Windows/Linux)
BLAKE2S:
-dcri 50 with no drop on ETH
RX 470 = 1300MH/s
RX 480 = 1450MH/s
So it should be possible to mine Verge in Dual Mode with Blake2s (there are 3 pools for it) without any drop in eth-mining, correct?
Does the dual mode heat up the cards more or stress them much, so the cards can break down at some point earlier? :-)
someone cn post bat file?
ETH: ethermine.org
Verge (Blake2s): http://www.zpool.ca/
Code:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.RX480 -epsw x -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw XVG-blake2s -dcri 50
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x54abE209A969A9f3B0BF07D54647b786F09753b4.RX480 -epsw x -dpool stratum+tcp://blake2s.mine.zpool.ca:5766 -dwal D9dMdBssQZRDueBzVeRUsEFzmA5smW1kQA -dcoin blake2s -dpsw XVG-blake2s -dcri 50
One question man, is that a xvg wallet? ive trying to understand the policy of zpool
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.6 (Windows/Linux)
Finally to I also contribute.
Claymore, thanks for this excellent treed and all members.
After my first month of mining, results are amazing.
No.1 rig - 6 GPU RX580-8 g
MB Gigabyte H110-D3a - Bios upgraded
No.2 rig - 5 GPU RX480-4 g
MB Asus Prime Z270 - Bios upgraded
On bouth
Ram 4 Gig
Win 10
After burner 440 beta 16
Claymore 10.2
Rig 1 - Drivers from August 2017
Rig 2 - Drivers RobinHood
Rig 1 - ETH 180-182 MH/s , PASC 1800 MH/s
Rig 2 - ETH 149 MH/s , PASC 1490 MH/s
dcri 10
Temp 48-55 C
Fun 80-90%
Undervolted
Still need to see my electric bill
Had a few problems, but after downclocking all its smooth.
Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.
Keep up good work Claymore
Claymore, thanks for this excellent treed and all members.
After my first month of mining, results are amazing.
No.1 rig - 6 GPU RX580-8 g
MB Gigabyte H110-D3a - Bios upgraded
No.2 rig - 5 GPU RX480-4 g
MB Asus Prime Z270 - Bios upgraded
On bouth
Ram 4 Gig
Win 10
After burner 440 beta 16
Claymore 10.2
Rig 1 - Drivers from August 2017
Rig 2 - Drivers RobinHood
Rig 1 - ETH 180-182 MH/s , PASC 1800 MH/s
Rig 2 - ETH 149 MH/s , PASC 1490 MH/s
dcri 10
Temp 48-55 C
Fun 80-90%
Undervolted
Still need to see my electric bill
Had a few problems, but after downclocking all its smooth.
Also auto restart is amazing solution, only missing Internet Power Restart, Rig 1 sometimes just block, no internet, black screen so it need manually to be restarted.
Keep up good work Claymore
you could restart it with this:
SainSmart Web TCP/IP 10A Relay Remote Control Kit
I use that without problems!
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.3 (Windows/Linux)
Has anyone noticed the payout on Dwarfpool have dropped dramatically over the past week? Seems like the drop in productivity is higher than the rate of difficulty increase. I recently switched from the European server to the US server and I am trying to figure out if that had anything to do with it. Thoughts?
I've noticed this as well, it's been getting worse and worse each day.
Im having the same issue
seems we have to move to another pool, which one should be fine?
Hi guys, i need some help from you!
I got a rig with 6 msi armor 570 8gb hynix memory, on a asus prime z270, i tried to use strapt 1500, and overclock 1230/2150 and everything its ok for 3 mins, then i got a blue screen, i tried to lower the overclock to 1100/1900 but same results, any suggestion?
This is my bios, i will try 1 gpu at time mining cause it driving me insane
https://mega.nz/#!y8sxEYIT!8cuqTqIaft2OGXxTSmfByKq_fyw6mN-ki-BxJa47w-M
I got a rig with 6 msi armor 570 8gb hynix memory, on a asus prime z270, i tried to use strapt 1500, and overclock 1230/2150 and everything its ok for 3 mins, then i got a blue screen, i tried to lower the overclock to 1100/1900 but same results, any suggestion?
This is my bios, i will try 1 gpu at time mining cause it driving me insane
https://mega.nz/#!y8sxEYIT!8cuqTqIaft2OGXxTSmfByKq_fyw6mN-ki-BxJa47w-M
Guys im testing a rig with 6 msi armor 570 8 gb edition, hynix memory, modified the bios, strap 1500 to .... you know the drill, 5 of the 6 cards are working dual mining fine at 30 mh/dcr 750 mh, but 1 card is rogue, the 6th card cant get past 22 mh, no matter what power limit/core/memory i use cant get past 22 mh on eth, any suggestion?
I am the only one who has shitty hashrates
4x GTX 1060 ASUS DUAL 6GB each 22,5 MH/s
1x GTX 1060 GIGABYTE 3GB 19MH/s
4x GTX 1060 ASUS DUAL 6GB each 22,5 MH/s
1x GTX 1060 GIGABYTE 3GB 19MH/s
Same hashrate (22.5) on evga gtx 1060 6 gb sc, micron
Could someone confirm they made 6+ GPU work with a Kaby Lake CPU? I'll have the time to try myself in a week or two, would be nice to see more information on this. Hope I don't have to downgrade the CPU... 
splurged on it.
Edit: v1.6+ BIOS supports Kaby Lake, is the custom BIOS based on that?
splurged on it.Edit: v1.6+ BIOS supports Kaby Lake, is the custom BIOS based on that?
I'm running 7x with g3900 cpu
running 7x pulse 570 4gb on a g3900 celeron cpu
guys im using a 750 watts gpu for risers/mobo bla bla, and using a server psu 1200 watts for the gpus, but i dont know what else to do cause windows wont detect any card, installed w10 uefi hard drive as gpt, uptaded to creepas bios... but w10 wont detect any of my rx570, any suggestion?
as soon as i connect a riser the mobo wont display anything, even with integrated graphics
as soon as i connect a riser the mobo wont display anything, even with integrated graphics
RX580 Sapphire Nitro+ 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx
RX580 Sapphire Pulse 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx
Maybe not all cards can be undervolted -75mv OR maybe more then -75mv
Strap copied to 2:1750, 2:2000, 2:2250:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
here is a blank, check you copy all without the blank (forum changes it?)
ETH: 30.1 - 30.3 - 100% Stable, 0 Errors, about 2 weeks
Long time i tried bios mods and many other memory straps, this one is the only working flawless with 30 MHs.
Other straps got me lower MH on memory overclock or blackscreens and artefacts
RX580 Sapphire Pulse 8GB Hynix at 1150 Mhz Core and 2150 Memory and Voltage -75mv - Trixx
Maybe not all cards can be undervolted -75mv OR maybe more then -75mv
Strap copied to 2:1750, 2:2000, 2:2250:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17
here is a blank, check you copy all without the blank (forum changes it?)
ETH: 30.1 - 30.3 - 100% Stable, 0 Errors, about 2 weeks
Long time i tried bios mods and many other memory straps, this one is the only working flawless with 30 MHs.
Other straps got me lower MH on memory overclock or blackscreens and artefacts
My man! Struggled with my 580s with Hynix...always locking up , lower hashrates or some other issue. This one did it. Thanks!
can this strap be used on any hynix card? (470-480-570-580)
Hello All.
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked
.
1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117" to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.
You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work.
I know that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm.
I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution.
Sorry for my English and grammar.
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked
. 1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117" to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.
You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work
.I know that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm.
I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution.
Sorry for my English and grammar.
Maybe someone could make a .rar and share it? xD
Sapphire 570 4GB Mini Elpida - strap 1750 - 1110/2040/-96mvgpu/30+target = 26,3-26,4 @ 164w on the wall = 169 USD newegg very nice
Your doing something wrong, I have this card at 29.5 MH @ 130 watts. Definitely the best bang for buck for the current 500 series line.
would you share your settings?
Look like there is a problem with the pool. This has been reported on reddit as well.
Hopefully they have something to say about it.
https://www.reddit.com/r/EtherMining/comments/663l9r/dwarfpool_down/
Hopefully they have something to say about it.
https://www.reddit.com/r/EtherMining/comments/663l9r/dwarfpool_down/
working good now
HI!
I'm experiencing problem with Dwarfpool (ETH). All my workers work perfectly and submitting shares, however on pool site, last share happened about 45 minutes an oll of my 6 workers.
Anyone else has the same problem?
I'm experiencing problem with Dwarfpool (ETH). All my workers work perfectly and submitting shares, however on pool site, last share happened about 45 minutes an oll of my 6 workers.
Anyone else has the same problem?
Yes, same here. Statistics is probably borked.
having the same problem today
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.1 (Windows/Linux)
I need some urgent advice about dwarfpool. I havent been paid by them for 9 hours. My miner is fully working, fully communicating with dwarfpool, they are accepting my shares. The dwarfpool monitoring page says my miner was active three minutes ago but the graph shows no shares fo 6 hours. What the hell is going on? Are they ripping me off? They are taking my work and not paying out.
I am dual mining decred with suprnova pool and all is fine with that? Are dwarfpool ripping me off?
I am dual mining decred with suprnova pool and all is fine with that? Are dwarfpool ripping me off?
I had the same problem with dwarfpool last night and it looks like they had some hickups but if you notice the "missing" amount is located in confirmed but not yet applied to your balance. For me at least it was eventually applied to my balance and has been running fine for the last few hours.
I hope you're right. Believe me there is nothing wrong with the miner, Dwarfpool is communicating and accepting all the shares. Hopefully it's just a buggy website.
I will give it until 9pm tonight then I'm moving to another pool.
Having the same issue, will wait a few hours, then probably will go to ethermine
I always used rx 480 cards for my builds in the past , few days ago received my first rx 470 nitro cards order for my new build.
My first priority was optimizing the bios for ETH mining with low power consumption and high MH/s
GPU-z reporting 75.6 watts , the card real wattage is around 100-110 watts / card .
( Test bench idle power draw at the wall 68-72 watts , with gpu hashing total wattage is 170-175 watts at the wall )
I was able to push the card to the 29.5-29.8 MH/s range , with much more power draw , but never checked the stability on that speed , it was running for 15-20 minutes without any problem .
Played with the bios / timing / voltage , created a modded bios , there is my result :
If im not using the computer to taking screenshot's the hash rate is stable in the 29.2-29.4 MH/s range
http://beszeljukmeg.com/ETH/NitroRX470hash.JPG
My first priority was optimizing the bios for ETH mining with low power consumption and high MH/s
GPU-z reporting 75.6 watts , the card real wattage is around 100-110 watts / card .
( Test bench idle power draw at the wall 68-72 watts , with gpu hashing total wattage is 170-175 watts at the wall )
I was able to push the card to the 29.5-29.8 MH/s range , with much more power draw , but never checked the stability on that speed , it was running for 15-20 minutes without any problem .
Played with the bios / timing / voltage , created a modded bios , there is my result :
If im not using the computer to taking screenshot's
the hash rate is stable in the 29.2-29.4 MH/s range http://beszeljukmeg.com/ETH/NitroRX470hash.JPG
This rx 470 4gb sapphire or no??
please link your bios
thanks
+1 to that
what did you do? strap 1700? So no matter what I do the card is not detected in the BIOS, tried in multiple motherboards. Until the bios detects it, atiflash wont see it.
got the same problem with a 470 nitro+, at least i send it back to amazon and got a refund for the card, try to do that, i did it and was fine (Even with the modified bios)
I did that last night, new one on the way by friday. My thought is the card was modded on the other position vswitch bios but worked on my current vswitch bios, after I modded that one I had no way to fix either of them, hence why I tried the 1+8, or either the card literally is a dead card.
What I have determined is now that I know all the functions on the card, I will test both vbios switch as normal rom and working, then make sure I am in performance mode that only gets the updated rom
To be honest i dont know why my card failed, i flashed the bios on performance mode, and never touched the switch, the card lights were on, but never detected on bios, it was running fine for 5 months along with 4 more, but at least amazon refund me 80% of the card and now the price is lower so i got a new one (samsung memory) from the refund i got