the round hasn't ended.

I think they would normally manually end the round after this long but with the current situation it might take a while.

I think the guys have a bit more to worry about than you not being able to register. Chill out, give the guys a break, they're working hard.
Stop barking orders at people.

binaryclock where is your pool ? EU / US ?

Thanks.

Cheers! .
I guess I'll also wait to see what's happening on Cryptsy before continuing to mine GDC.

Can anyone recommend a stable pool for GDC please?

Last 24 hours the pools Ive been using to mine grandcoin have shutdown.
miningpool.co 's GDC pool is up and down all over the place and now is permanently shutdown
and my backup GDC pool got shutdown due to some error too. Why is there so many issues with this coin ?

 

are you undervolting your cards at all ?

I had mine undervolted and one card was stable but the other wasn't. Had to find a value that worked for both.
I use two cards which have 2GPUs so I have 4GPUs but i only specify thread concurrency once ie --thread-concurrency 8192 not 8192,8192

Hey all

Been mining BTC for a while with some blockerupters from ebay but decided to get into mining scrypt based coins.
Mostly mining LTC at the moment, but also getting into some grandcoin stuff too.
My rig has 2x7990s and gets around 2.6MH/s. Check out my stats :

http://bitrush.info/stats2.png

The 7990s run really really hot, so my case has 3 125mm RVK fans that run 24x7 blowing air into the case at floor level.

I was thinking of getting the risers and adding another card but can't seem to find any 7990s any more, at least not at any reasonable price.

The whole setup uses 1050W (the RVK fans use ~ 150-200W) clocked the core down to 950MHz and memory down to 1300MHz and undervolted to 1.180mV
saves me about 150W. Evga 1300W PSU in the box.