Search content
Sort by
Showing 15 of 15 results by clancy182
Re: [ANN] TeamRedMiner 0.4.5 - Cryptonight Thread - High hashrate, Low Power
What is your --cn_config ?
--cn_config 15*15 is default for Vegas. I'm using --cn_config 14*14 - this is best for Vega56.
Open your miner profile,go to Advanced and add --cn_config 14*14 parameter.
https://imgur.com/ZEKk13B
Maybe that will help
--cn_config 15*15 is default for Vegas. I'm using --cn_config 14*14 - this is best for Vega56.
Open your miner profile,go to Advanced and add --cn_config 14*14 parameter.
https://imgur.com/ZEKk13B
Maybe that will help
for sure, it helped
thanks !!!
Re: [ANN] TeamRedMiner 0.4.5 - Cryptonight Thread - High hashrate, Low Power
Maybe you need diffrent OS
I also have rig with 4 reference Vega 56 (flashed with 64 bios).
Here my best results with diffrent OS and BIOS:
TeamRedMiner 0.4.4 under MMP OS 2 (Ubuntu)
4xVega 56(stock bios)
core 1200mHz/850mV memory 910mHz/850mV
7.760kh/s @ 640W from wall
what ppt do u use for ur 4xVega 56(stock bios)?
where can i find if ?
I'm using [Mining OS] MMP OS 2.0 - https://bitcointalk.org/index.php?topic=5088988.0
Ubuntu based OS,with easy to config ppt.
https://imgur.com/9pI6amG
https://imgur.com/aQrNlVD
Support TeamRedMiner and have Smart tune for Vega.
just tried MMP OS2.
with ur parameters, i have 6,2 kh and u have 7,7kh
wtf
Re: [ANN] TeamRedMiner 0.4.5 - Cryptonight Thread - High hashrate, Low Power
i didnt flash my vega 56 but i used a ppt from http://vega.miningguides.com/#SoftTables
in gpuz, the default clock is 1408mhz and memory 1100mhz
clock 1400mhhz and memory 900mhz
my ODT settings
GPU_P0=852;800
GPU_P1=991;810
GPU_P2=1084;820
GPU_P3=1138;830
GPU_P4=1150;840
GPU_P5=1202;850
GPU_P6=1212;905
GPU_P7=1400;850
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=800;820
Mem_P3=900;900
Fan_Min=2500
Fan_Max=3000
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=70
Power_Target=0
You're using a PPT meant for a Vega 64. 1100MHz mem is too high (essentially invalid) for a stock 56, as it has much tighter timings. Obviously it doesn't matter after you update your clocks w/ ODNT, but you should probably get a valid PPT.
Also, your ODNT settings are broken as well - your GPU_P7 voltage should be >= P6. With these settings, if you're lucky, you're just running at 905mv, but in the past, I've seen all kinds of strangeness w/ out-of-order clocks/voltages. If you really want to run @ 850mv, you need to reduce P6, as well as Mem_P3 to <= 850. OTOH, if you want to run at 905, you just need to set P7 to 905.
EDIT: One last thing, you're setting your throttling temp to 70, but your target temp to 75 - this doesn't make sense. Also, unless your fans/temps are set for noise reasons, 70/75 is quite hot, while your fan_max is actually what most people consider the minimum for mining on a ref. I would set your fan_max to at least 3500-4000 (again, unless noise is a concern,) and fan_target somewhere closer to 55-60 (even 50 if you can handle the noise.)
thx for ur answer
where can i get a valide ppt for vega 56 stock bios ?
Re: [ANN] TeamRedMiner 0.4.5 - Cryptonight Thread - High hashrate, Low Power
hi,
summer is coming,
i have 4 reference vega 56 with stock bios.
In order to lower the heat and reduce the noise, what should i do ?
flash them with 64 bios ?
which ppt should i use ?
today, i use my vegas with stock bios and 1100MHz HBM @ 905mV power play table
and i have this perf
[2019-05-05 23:48:35] GPU 0 [62C, fan 70%] cnr: 1.839kh/s, avg 1.843kh/s, pool 1.912kh/s a:76 r:1 hw:0
[2019-05-05 23:48:35] GPU 1 [57C, fan 66%] cnr: 1.855kh/s, avg 1.843kh/s, pool 1.258kh/s a:50 r:0 hw:0
[2019-05-05 23:48:35] GPU 2 [59C, fan 71%] cnr: 1.836kh/s, avg 1.834kh/s, pool 1.987kh/s a:79 r:1 hw:0
[2019-05-05 23:48:35] GPU 3 [61C, fan 70%] cnr: 1.840kh/s, avg 1.847kh/s, pool 1.887kh/s a:75 r:2 hw:0
[2019-05-05 23:48:35] Total cnr: 7.370kh/s, avg 7.365kh/s, pool 7.043kh/s a:280 r:4 hw:0
and 718w at wall
thanks fot help
summer is coming,
i have 4 reference vega 56 with stock bios.
In order to lower the heat and reduce the noise, what should i do ?
flash them with 64 bios ?
which ppt should i use ?
today, i use my vegas with stock bios and 1100MHz HBM @ 905mV power play table
and i have this perf
[2019-05-05 23:48:35] GPU 0 [62C, fan 70%] cnr: 1.839kh/s, avg 1.843kh/s, pool 1.912kh/s a:76 r:1 hw:0
[2019-05-05 23:48:35] GPU 1 [57C, fan 66%] cnr: 1.855kh/s, avg 1.843kh/s, pool 1.258kh/s a:50 r:0 hw:0
[2019-05-05 23:48:35] GPU 2 [59C, fan 71%] cnr: 1.836kh/s, avg 1.834kh/s, pool 1.987kh/s a:79 r:1 hw:0
[2019-05-05 23:48:35] GPU 3 [61C, fan 70%] cnr: 1.840kh/s, avg 1.847kh/s, pool 1.887kh/s a:75 r:2 hw:0
[2019-05-05 23:48:35] Total cnr: 7.370kh/s, avg 7.365kh/s, pool 7.043kh/s a:280 r:4 hw:0
and 718w at wall
thanks fot help
Maybe you need diffrent OS
I also have rig with 4 reference Vega 56 (flashed with 64 bios).
Here my best results with diffrent OS and BIOS:
TeamRedMiner 0.4.4 under win 10 19.3.2 PPT Mem_P3=1100;850 GPU_P7=1300;850
4xVega 56(Vega 64 bios)
core 1300mHz/850mV memory 1100mHz/850mV
8.126kh/s @ 780W from wall
TeamRedMiner 0.4.4 under MMP OS 2 (Ubuntu)
4xVega 56(Vega 64 bios)
core 1300mHz/850mV memory 1100mHz/850mV
8.726kh/s @ 720W from wall
TeamRedMiner 0.4.4 under MMP OS 2 (Ubuntu)
4xVega 56(stock bios)
core 1200mHz/850mV memory 910mHz/850mV
7.760kh/s @ 640W from wall
what ppt do u use for ur 4xVega 56(stock bios)?
where can i find if ?
Re: [ANN] TeamRedMiner 0.4.5 - Cryptonight Thread - High hashrate, Low Power
hi,
summer is coming,
i have 4 reference vega 56 with stock bios.
In order to lower the heat and reduce the noise, what should i do ?
flash them with 64 bios ?
which ppt should i use ?
today, i use my vegas with stock bios and 1100MHz HBM @ 905mV power play table
and i have this perf
[2019-05-05 23:48:35] GPU 0 [62C, fan 70%] cnr: 1.839kh/s, avg 1.843kh/s, pool 1.912kh/s a:76 r:1 hw:0
[2019-05-05 23:48:35] GPU 1 [57C, fan 66%] cnr: 1.855kh/s, avg 1.843kh/s, pool 1.258kh/s a:50 r:0 hw:0
[2019-05-05 23:48:35] GPU 2 [59C, fan 71%] cnr: 1.836kh/s, avg 1.834kh/s, pool 1.987kh/s a:79 r:1 hw:0
[2019-05-05 23:48:35] GPU 3 [61C, fan 70%] cnr: 1.840kh/s, avg 1.847kh/s, pool 1.887kh/s a:75 r:2 hw:0
[2019-05-05 23:48:35] Total cnr: 7.370kh/s, avg 7.365kh/s, pool 7.043kh/s a:280 r:4 hw:0
and 718w at wall
thanks fot help
summer is coming,
i have 4 reference vega 56 with stock bios.
In order to lower the heat and reduce the noise, what should i do ?
flash them with 64 bios ?
which ppt should i use ?
today, i use my vegas with stock bios and 1100MHz HBM @ 905mV power play table
and i have this perf
[2019-05-05 23:48:35] GPU 0 [62C, fan 70%] cnr: 1.839kh/s, avg 1.843kh/s, pool 1.912kh/s a:76 r:1 hw:0
[2019-05-05 23:48:35] GPU 1 [57C, fan 66%] cnr: 1.855kh/s, avg 1.843kh/s, pool 1.258kh/s a:50 r:0 hw:0
[2019-05-05 23:48:35] GPU 2 [59C, fan 71%] cnr: 1.836kh/s, avg 1.834kh/s, pool 1.987kh/s a:79 r:1 hw:0
[2019-05-05 23:48:35] GPU 3 [61C, fan 70%] cnr: 1.840kh/s, avg 1.847kh/s, pool 1.887kh/s a:75 r:2 hw:0
[2019-05-05 23:48:35] Total cnr: 7.370kh/s, avg 7.365kh/s, pool 7.043kh/s a:280 r:4 hw:0
and 718w at wall
thanks fot help
I wouldn't flash to v64 because that increase the voltgae on the hbm and make more heat.
But you say you use stock bios at 1100hbm isn't that vega 64?
Anyway. Try and lower your core clock as low as you can tolerate the drop in hashrate. This will reduce power and heat.
i didnt flash my vega 56 but i used a ppt from http://vega.miningguides.com/#SoftTables
in gpuz, the default clock is 1408mhz and memory 1100mhz
clock 1400mhhz and memory 900mhz
my ODT settings
GPU_P0=852;800
GPU_P1=991;810
GPU_P2=1084;820
GPU_P3=1138;830
GPU_P4=1150;840
GPU_P5=1202;850
GPU_P6=1212;905
GPU_P7=1400;850
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=800;820
Mem_P3=900;900
Fan_Min=2500
Fan_Max=3000
Fan_Target=75
Fan_Acoustic=2400
Power_Temp=70
Power_Target=0
Re: [ANN] TeamRedMiner 0.4.5 - Cryptonight Thread - High hashrate, Low Power
hi,
summer is coming,
i have 4 reference vega 56 with stock bios.
In order to lower the heat and reduce the noise, what should i do ?
flash them with 64 bios ?
which ppt should i use ?
today, i use my vegas with stock bios and 1100MHz HBM @ 905mV power play table
and i have this perf
[2019-05-05 23:48:35] GPU 0 [62C, fan 70%] cnr: 1.839kh/s, avg 1.843kh/s, pool 1.912kh/s a:76 r:1 hw:0
[2019-05-05 23:48:35] GPU 1 [57C, fan 66%] cnr: 1.855kh/s, avg 1.843kh/s, pool 1.258kh/s a:50 r:0 hw:0
[2019-05-05 23:48:35] GPU 2 [59C, fan 71%] cnr: 1.836kh/s, avg 1.834kh/s, pool 1.987kh/s a:79 r:1 hw:0
[2019-05-05 23:48:35] GPU 3 [61C, fan 70%] cnr: 1.840kh/s, avg 1.847kh/s, pool 1.887kh/s a:75 r:2 hw:0
[2019-05-05 23:48:35] Total cnr: 7.370kh/s, avg 7.365kh/s, pool 7.043kh/s a:280 r:4 hw:0
and 718w at wall
thanks fot help
summer is coming,
i have 4 reference vega 56 with stock bios.
In order to lower the heat and reduce the noise, what should i do ?
flash them with 64 bios ?
which ppt should i use ?
today, i use my vegas with stock bios and 1100MHz HBM @ 905mV power play table
and i have this perf
[2019-05-05 23:48:35] GPU 0 [62C, fan 70%] cnr: 1.839kh/s, avg 1.843kh/s, pool 1.912kh/s a:76 r:1 hw:0
[2019-05-05 23:48:35] GPU 1 [57C, fan 66%] cnr: 1.855kh/s, avg 1.843kh/s, pool 1.258kh/s a:50 r:0 hw:0
[2019-05-05 23:48:35] GPU 2 [59C, fan 71%] cnr: 1.836kh/s, avg 1.834kh/s, pool 1.987kh/s a:79 r:1 hw:0
[2019-05-05 23:48:35] GPU 3 [61C, fan 70%] cnr: 1.840kh/s, avg 1.847kh/s, pool 1.887kh/s a:75 r:2 hw:0
[2019-05-05 23:48:35] Total cnr: 7.370kh/s, avg 7.365kh/s, pool 7.043kh/s a:280 r:4 hw:0
and 718w at wall
thanks fot help
Re: SRBMiner Cryptonight AMD GPU Miner V1.8.5 - native algo switching
What driver recommend for new version 1.8.5?
Are we need to apply memory timing after that?
Are we need to apply memory timing after that?
I still think that 18.6.1 creates the fastest code, if you are compiling.
If you have Vegas you can use the built in 'tweaking profiles' or use ElioVP's tool but first disable SRB tweaking with --disabletweaking switch
I like your api remote
My Vega56 hynix reaches 2100+, so you should do much better
Hey, can you post what driver you are using and what ODN settings? I know you wrote "just pushed mem up to 940mhs and P7 to 925mV."
But can you please elaborate a little bit on how you achieved that?
Cheers
Here's a video for you :
https://youtu.be/QyJzAhdDnPg
hi dok,
in the video, how can u have so low temp with 2300 rmp
i have 4 vega 56 with stock bios and i reach like 65-70°...
what is the light mode with ODT that u mentioned in this video ?
i use 1.8.7 srbminer with 18.6.1 without softpowerplay table
JG
Re: SRBMiner Cryptonight AMD GPU Miner V1.8.1 - native algo switching
hi,
i still have crash after 24 hours of using with 1.8.1
its better than 1.8.0 (crash after 4-6 hours)
no crash before.
GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 12]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 6]
GPU3: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 3]
-----------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.1
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
-----------------------------------------------------------------------------
Algorithm : Cryptonight V4 (R)
Algo switching : disabled
Startup monitor : enabled
Gpu watchdog : enabled [normal mode]
Coin forking : disabled
i still have crash after 24 hours of using with 1.8.1
its better than 1.8.0 (crash after 4-6 hours)
no crash before.
GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 12]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 6]
GPU3: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 3]
-----------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.1
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
-----------------------------------------------------------------------------
Algorithm : Cryptonight V4 (R)
Algo switching : disabled
Startup monitor : enabled
Gpu watchdog : enabled [normal mode]
Coin forking : disabled
hello @
what intensity do u use with vega 56 stock bios for etn mining ?
what intensity do u use with vega 56 stock bios for etn mining ?
intensity for vega 56 with 64 bios
v7 = intensyiti 120
heavy = 56
lite = 235
lite v7 = 235
ipbc = 234/239
aeon = 235
arto = 120
b2n = 120
aloy = 120
thanks !
@doktor83 I'm pretty sure that you are aware of all these occasions, I mean with the hashdrop.
Cards with 4gb memory dont have this issue, at least to me. They reach maximum hashspeed immediately.
The problem is with the 8gb cards.
Whenever I start your miner one of them, sometimes more, can go up to maximum, others no and they stay low all the time
even after 2,3,4 hours of mining.
Next time I'm starting your miner some other cards or card do the opposite thing. It's a random situation.
To help things out, you of course the developer of a great miner to me, I found out that running GPU-Z at the time your miner runs
and passing throu all cards one by one and then exiting, voula all cards running full speed. Problem solved.
But of course this is not a solution!!!
Maybe something with the interrupts?
I'm trying to help!
Cards with 4gb memory dont have this issue, at least to me. They reach maximum hashspeed immediately.
The problem is with the 8gb cards.
Whenever I start your miner one of them, sometimes more, can go up to maximum, others no and they stay low all the time
even after 2,3,4 hours of mining.
Next time I'm starting your miner some other cards or card do the opposite thing. It's a random situation.
To help things out, you of course the developer of a great miner to me, I found out that running GPU-Z at the time your miner runs
and passing throu all cards one by one and then exiting, voula all cards running full speed. Problem solved.
But of course this is not a solution!!!
Maybe something with the interrupts?
I'm trying to help!
On my Vega 56 on 18.3.4 drivers (HCC disabled), I run cast_xmr with the maxmem option and then when the hash rate gets a little higher than 1325, I quit and switch to SRB miner (56 intensity, 8 worksize) and then I get the 1450-1500 hashes
Some people have reported that if you do this with 60 intensity and then drop it back down to 56, you get the full hashrate but I haven't gotten it to work
When I had blockchain drivers, I couldn't get this to work reliably but I did succeed a few times by enabling HCC memory
in my case, i launch the miner with 60 intenisty, i kill the process and i relaunch it with 56 to have 1500 hs per vega56
Re: [ANN] [POW] [XHV] Haven Protocol - untraceable payments x stable value storage
hello.! are you gonna fix the problem with the online wallet? i put this address to mining haven. i must change it?
I need my money for electricity!!?? When the wallet will start working?? Are we robbed? 
The web wallet is a down for server upgrades and fixes. You should download an actual Haven wallet as is always recommended.
I know what I have to do....
The wallet did not work properly a week before you turned it off. Ten days have passed.
Where is my money?
Any news about the wallet?
When we will be able to pick up our coins from the wallet?
Please answer to me. This is not normal and this situation is very weird.
The web wallet has been handed off to be run by another developer now as it became unviable to manage with the increased network load as you mentioned there were frequent crashes. The web wallet should never be used alone. You should download a local wallet from the website.
Good to know that you guys took the proper steps to solve the issue.
So we can hope that it will be back on line sometime in the future.
I have about 10 haven that I would like to recover one day... on the web wallet.
In the mean time I am not able to get the GUY wallet to connect properly. Surely user error, yet it is the only wallet, out of 10 different coins, that I am not able to get going.
Having a proper web wallet that just plain work, idiot proof (ala XMR or ETN) for a crypto that desire to succede is not a bad thing either.
It is just simple marketing.
For the time being I mine directly to TradeOgre.
how do u mine directly to tradeogre ?
i cant find the paymentid in my tradeogre account
hi
i have a question
when i launch srbminer after a reboot i get 1350 hs per card
and when i kill the process and relaunch it, i get 1500 - 1550 h per card
do u know why ?
the intensity is always 56
and i have reference vega 56 with stock bios
i have a question
when i launch srbminer after a reboot i get 1350 hs per card
and when i kill the process and relaunch it, i get 1500 - 1550 h per card
do u know why ?
the intensity is always 56
and i have reference vega 56 with stock bios
is that on heavy algo?
yes with heavy algo
first launch with intensity 56
[2018-04-28 23:01:07] GPU0: 1359.0 H/S [T: 47c, RPM: 3333, CC: 1430 MHz, MC: 930 MHz]
[2018-04-28 23:01:07] GPU1: 1375.0 H/S [T: 43c, RPM: 3356, CC: 1440 MHz, MC: 958 MHz]
[2018-04-28 23:01:07] GPU2: 1348.0 H/S [T: 45c, RPM: 3326, CC: 1420 MHz, MC: 920 MHz]
[2018-04-28 23:01:07] GPU3: 1399.0 H/S [T: 45c, RPM: 3287, CC: 1465 MHz, MC: 970 MHz]
[2018-04-28 23:01:07] Total: 5481.0 H/S
then i relaunch the miner with intensity 60 ( a bit too high for my vegas)
[2018-04-28 23:02:55] GPU0: 1334.0 H/S [T: 49c, RPM: 3660, CC: 1430 MHz, MC: 930 MHz]
[2018-04-28 23:02:55] GPU1: 1353.0 H/S [T: 48c, RPM: 3673, CC: 1440 MHz, MC: 958 MHz]
[2018-04-28 23:02:55] GPU2: 1322.0 H/S [T: 48c, RPM: 3721, CC: 1420 MHz, MC: 920 MHz]
[2018-04-28 23:02:55] GPU3: 1372.0 H/S [T: 49c, RPM: 3646, CC: 1465 MHz, MC: 970 MHz]
[2018-04-28 23:02:55] Total: 5381.0 H/S
hashrates are lower
and then i relaunch the miner with intensity 56 and then booom to 1500
[2018-04-28 23:04:15] GPU0: 1512.0 H/S [T: 49c, RPM: 3393, CC: 1430 MHz, MC: 930 MHz]
[2018-04-28 23:04:15] GPU1: 1529.0 H/S [T: 45c, RPM: 3376, CC: 1440 MHz, MC: 958 MHz]
[2018-04-28 23:04:15] GPU2: 1497.0 H/S [T: 48c, RPM: 3390, CC: 1420 MHz, MC: 920 MHz]
[2018-04-28 23:04:15] GPU3: 1558.0 H/S [T: 49c, RPM: 3382, CC: 1465 MHz, MC: 970 MHz]
[2018-04-28 23:04:15] Total: 6096.0 H/S
hi
i have a question
when i launch srbminer after a reboot i get 1350 hs per card
and when i kill the process and relaunch it, i get 1500 - 1550 h per card
do u know why ?
the intensity is always 56
and i have reference vega 56 with stock bios
i have a question
when i launch srbminer after a reboot i get 1350 hs per card
and when i kill the process and relaunch it, i get 1500 - 1550 h per card
do u know why ?
the intensity is always 56
and i have reference vega 56 with stock bios