Ninjastic
Search content
Sort by
Showing 7 of 7 results by daurwid
Post
Topic
Board Mining software (miners)
Re: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT
by
daurwid
on 03/02/2014, 17:23:05 UTC
P_Shep,

Can you compile a newer version with the -scrypt option?  It is not available in the builds I've tested.

Thanks
Post
Topic
Board Mining software (miners)
Re: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT
by
daurwid
on 16/12/2013, 16:19:33 UTC
Quote from: OtaconEmmerich on December 13, 2013, 12:12:28 PM
Quote from: daurwid on December 12, 2013, 03:15:37 PM
uptime on router 8 hrs, still running and uses very little resources. 3.8.5.
What router model and what firmware if you wouldn't mind sharing.

E3000 (WRT610Nv2 converted to E3000)+ KONGMOD 22200M + OTRW2

I also noticed that this optware was loading transmission_daemon which i had to disable the service as well as edit the /opt/etc/init.d/K90transmission and comment out line #129 which would run a gunzip process at 100% cpu at start.
Post
Topic
Board Mining software (miners)
Re: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT
by
daurwid
on 13/12/2013, 20:25:57 UTC
Quote from: daurwid on December 12, 2013, 03:15:37 PM
uptime on router 8 hrs, still running and uses very little resources. 3.8.5.

Update.  Stability problems.  Log file shows this as error:

Quote
[2013-12-13 13:06:08] BAS0: GetResults failed no data returned  (err=0 amt=0)
 [2013-12-13 13:06:08] BAS0: RequestQueJobStatus failed no data returned  (err=0 amt=0)
 [2013-12-13 13:06:09] BAS 0 RequestResults usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2013-12-13 13:06:09] BAS 0 attempted reset got err:(0) LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED
 [2013-12-13 13:06:09] BAS0: RequestResults failed no data returned  (err=0 amt=0)
 [2013-12-13 13:06:09] BAS0: GetResults failed no data returned  (err=0 amt=0)
 [2013-12-13 13:06:10] BAS0: GetResults failed (err=-7 amt=0)
 [2013-12-13 13:06:10] BAS 0 RequestQueJob usb write err:(-7) LIBUSB_ERROR_TIMEOUT
 [2013-12-13 13:06:10] BAS 0 attempted reset got err:(0) LIBUSB_SUCCESS / LIBUSB_TRANSFER_COMPLETED
 [2013-12-13 13:06:10] BAS0: RequestQueJob failed no data returned  (err=0 amt=0)
 [2013-12-13 13:06:11] BAS0: GetResults failed no data returned  (err=0 amt=0)
 [2013-12-13 13:06:11] BAS0: GetResults failed (err=-7 amt=0)
 

Over time this would cause the router to reboot or force the service to restart.  Lots issues with router as well (attempting to use VPN was becoming a problem).

Rolled back to 3.6.3.

I'm running Kongmod 22200M + OTRW2.
Post
Topic
Board Mining software (miners)
Re: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT
by
daurwid
on 12/12/2013, 15:15:37 UTC
uptime on router 8 hrs, still running and uses very little resources. 3.8.5.
Post
Topic
Board Mining software (miners)
Re: CGminer v3.8.5 on Broadcom based DD-WRT / OpenWRT
by
daurwid
on 11/12/2013, 21:31:37 UTC
Quote from: P_Shep on December 10, 2013, 10:10:58 PM
OK, here it is:

https://www.dropbox.com/s/4oik0ecfezclq9u/cgminer_3.8.5_mipsel.ipk

Working for me right now.

Installed and seems to be running.  I'll report on it after 24 hours have passed.
Post
Topic
Board Mining software (miners)
Re: CGminer v3.8.3 on Broadcom based DD-WRT / OpenWRT
by
daurwid
on 10/12/2013, 16:55:36 UTC
Quote from: OtaconEmmerich on December 09, 2013, 06:04:13 PM
Boo  Angry
Same error as last time. LIBUSB_ERROR_NOT_SUPPORTED  Angry
Back to 3.6.1 again.

I rolled back to 3.6.3 per P_Shep's suggestion.  I have had no problems since.  Hopefully ckolivas can figure out what's going on with the newer versions.  I tested 3.7.x & 3.8.x versions but could not get them to detect my BFL MiniRig SC.
Post
Topic
Board Beginners & Help
Re: Need major help - PLEASE 1600 BTC
by
daurwid
on 07/12/2013, 16:28:05 UTC
Quote from: LightningBlade on December 07, 2013, 03:15:22 PM
Whatever you do, avoid MTgox. It is one of the hardest place to get usd out.

I concur with this statement.  I have been waiting over 6 months to receive $1500 from them.  Their support "promises to send it soon" everytime I ask.