Hello

I've contacted Canaan directly, they told me that I have the MM Board of my miner defective, and needs to be replaced.

Hope they send me the replacement.

Hello

I have a  Avalon 1066, and it is causing a false positive Temperature Reg. causing my miner shut down...

Could you help me to edit the cgminer to make my miner not turning off..

Thanks

P.D: I've cheked the board and it is OK.. the chip reading temp bumps to 142 C. after 3-5 minutes and stop working. I've putted new thermal grase all over the board just in case.

You can look the Log down here

Thanks for any help.

https://imgur.com/a/lqzlhOD

Found the other board has a faulty chip, when I was cleaining it.. the chip falled down with the heatsink.. I would get a good chip from the burned board and trying to resolder.. I have a heat gun... and  flux.. and all the equipment to repair it...

I have one T17e, one card burned out the chips heatsinks came away made short-circuit, so I have two boards left, One is dead tells me 0 Asics. And the other one must to be placed at a warm place in order to startup and work, because a normal cold start-up doesn't come to live. Do you know what I should do to fix that in order to cold start my miner normaly.. not needed  to warm it up to start it.. the problem that the board gives to me when it cold start is 0,then 4 then 6 Asics and ERROR_TEMP_LOST.. should I change the temp sensor..?? or should I remove all the heatsinks and clean it.. and put the heatsinks again? in order to heat the board over a faulty contact on the board?

Thanks for any help in advance..!!!

HELLO

I'VE HAD PLENTY OF BITMAINTECH COUPONS FOR SALE... CONTACT ME IF YOU ARE INTERESTED..!!!

WE CAN USE BITIFY FOR ESCROW SALE..

Hello I have 3 x 300$ worth valid till 2018-04-12  and 3x 50$ worth valid till 2018-06-30 Bitmain coupons for sale..!!!!

If you want to..!!! please PM me..!!!

Bitcoin Acepted..!!!

Thanks.!

Hello

I have this problem with my S7 Batch 5 hashing board.... What should I do..? Please Help..!!!!

Said 0 Temp and # 30 ASIC Chain

Thanks

http://i.imgur.com/Wjn27t1.jpg