The  new  version  is  finally  ready.  You  can  download  PhoenixMiner  5.8c  from  here:

PhoenixMiner_5.8c_Windows.zip Github
PhoenixMiner_5.8c_Linux.tar.gz Github


Changes in version 5.8c :

• Full LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8c

After dag 224 miner says that
"Socket was closed remotely by pool. Along time that not mined for developing mode"
 or something like that and then set automatically nofee mode and decrease the hashrate.
I didn't any thing in my rig.
What's is problem.
Has any one the same problem?
I am from Iran.
Is it possible that ISP steal the shares?

Hi.
Recently claymore understand that something block devfee and after couple hours set nofee command automatically in clymore and hasheate drop.
Is there any option to set :
After some blocking send one to devfee wallet?
I guess in this case it will work better.

i lost 0.1 Ethereum too.
how we can report this fucker.
the owner has been received  8 Ethereum from this way

Hello Claymore.
sometimes when miner start to mine the monitor blink once or twice and miner don't set the DAG file and then shows the address of miner and nothing happen until i reset the system or miner, even sometimes it happen again if i start again the miner.
what's the reason of this problem ?
when it's happen nothing mine and the rig dosnt reset.

there is question here about approximate earning..
Accourding to witch pool i can earn this estimate money???
witch pool give us this amount of money for that HashRate???