The new beta version is finally ready. You can download PhoenixMiner 5.7a from here:

PhoenixMiner_5.7a_Windows.zip (GitHub)
PhoenixMiner_5.7a_Linux.tar.gz (GitHub)



The new features in this release are:

• Added lock core clock
• The problem with the missing GPU temperatures on Nvidia GPUs is fixed
• Added native kernels for AMD RX6700 GPUs. These are faster than the generic kernels and produce a lot less stale shares
• Increase the max supported DAG epoch to 550 (should be enough to about Jan 2023)
• Full support for setting clocks, fan speeds, voltages, and memory timings of AMD RX6900/6800/6700 cards
• The specific hashrate is now shown in the form of kilo hashes per joule (kH/J). Example: if a GPU has hashrate of 30 MH/s with 100W power usage, the specific hashrate is 300 kH/J
• Added new command-line parameters -ttj and -ttmem, allowing automatic fan speed control based on GPU hotspot (junction), and memory temperatures respectively. Example: -ttmem 83 will keep the GPU memory temperature at or bellow 83C by increasing the fan speed as necessary. These parameters can be combined with -tt, as well as with each other. These options are supported only on AMD GPUs that report junction and memory temperatures
• Added new command-line parameters -tmaxj and -tmaxmem, allowing to decrease the GPU usage when the GPU hotspot (junction), or GPU memory temperatures are above the specified thresholds. These options are supported only on AMD GPUs that report junction and memory temperatures
• Added support for AMD Windows drivers 21.3.2, and 21.3.1
• Added support for AMD Linux drivers 20.50.x. Use this drivers only if you have Polaris or older GPUs, or the latest RX6x000 GPUs. WARNING: Vega, Radeon VII, and Navi GPUs won't work with these drivers!
• Turn off the zero fan feature on AMD cards whenever a fixed fan speed is used (e.g. -tt -40), or when an auto fan with min fan speed is used (e.g. -tt 63 -minfan 35). To disable this feature, add -fanstop 1 command-line parameter
• When -mcdag 1 is specified under Linux, the miner will not wait for the daggen.sh script to finish before starting to generate the DAGs. Instead it will for a fixed 7 seconds. This allows you to do all the following in the daggen.sh: turn off the overclocking of Nvidia GPUs, sleep for 30-60 seconds to allow time for DAG generation, and then re-apply the overclocking of the Nvidia GPUs
• Other small improvements and fixes

The support for -ttj, -ttmem, -tmaxj, and -tmaxmem for Nvidia 3090 and 3080 GPUs is not yet ready for release. We hope to have it ready for the final 5.7 release.

For more robust integrity check, you can use our GPG public key, which was verifyed with ETH transaction from our main devfee account as explained here: https://bitcointalk.org/index.php?topic=2647654.msg56755869#msg56755869.

Please let us know if you have any problems or questions related to PhoenixMiner 5.7a.

If you need invite, you can use my link   https://wallet.merit.me/?invite=gogo
Confirmation immediately . Enjoy Merit

Yes, it staks 24/7 .The coinmarkets wallet is always open.If you use your desktop wallet you must keep it always open to stake 24/7.
Nodes are on page 5.

1050ti is good for mining this algo - about 10-11 Mh/s and 750ti - 5-6 Mh/s . AMD R9 380 is doing also well with 9 Mh/s.

Sorry ,really dont't know what's going on. Just checked ,I have regular payments for this period of time.

Is this your desktop wallet or exchange wallet address?

   Check if your wallet receive address is the same as your miner configuration. Also coins need some time to mature and then you will receive them. Usually you receive first mined coin after 4-6 hours or 100 blocks time.Everything is working perfectly .If there is a problem with the wallet or the blockchain we will all have problems . Please chack your settings ,miner configuration and receive addresses very carefuly.                                                                                   

My friend ,you can try this one : https://github.com/JayDDee/cpuminer-opt/releases
but I don't know how to configurate it ,because I don't have much experiance on CPU mining.

It's already 3.8 sat...was 1.7 sat before 2 days. Looks good for now.

Try this solution,it may help.But only if you don't have any coins in the wallet.You may lose them if you don't have wallet backup.

After 2-3 days when the price go up there will be more miners.And after 6 weeks when the PoS begin this coin will be awesome.See
SHIELD (XSH) the price is over $0.1 now .The same gonna happen.

Algo Skunkhash = 25-27 Mh/s   gtx 1070

Worker's speed       Difficulty
<500 Mhash/s         1
500-1000 Mhash/s     2
1000-2000 Mhash/s    4
2000-4000 Mhash/s    8
4000-10000 Mhash/s   16
10000-40000 Mhash/s  32
>40000 Mhash/s       64
This is the best setting.
It depends what coin you mine and what is the hashrate of your rig.In almost every pool this setting is changing automatically for every user.
So i think there is no need to set the difficulty manually.

This is pool wallet. You can see the payments every 2 hours. Definitely bsod.pw wallet because i found payments to me too.

The premine is ~1%  ,something like 7 000 000 coins or the first 280 blocks . Other coins premine is around 5% to 20% . And the exchanges wants 1-3 BTC to add and support new coins.
And now a lot of miners that sell coins for few dollars are keeping the price low.

NO minimum .  Heт минимyмa .

They want 50K$ volume. Something like  3.5 BTC .

You can also store them in your coinsmarkets lemanum wallet.There they will stake automatically after block 60000 because coinmarkets wallet is always open.

Yes, ccminer.No more settings,just like above.