Please add an option
sending to the com port of the current hash rate in megahashes
(current hash rate in megahashes divided by 10)
preferably one byte .. (0-255)
COM port number to be set in the configuration
I want to make my supervisor on a microcontroller
stm or avr
this option would simplify the task

Where can i see the difficulty graph for Hanacoin?
Also when will you be listed on any exchanges?

I am selling 3 rigs. Each rig has 6x 1050ti gpu's.
So in total there are 18 gpu's
They are 9 months old and still have over 2 years warranty.
on equihash algo(ethereum) all 3 mine at 365mh/s.
You can expect to get your ROI back in 6 months.
They are working with no problems.
plug and play system.
They are running on linux (http://ethosdistro.com/)
I can also install windows if you want for a small fee.
The most profitable and stable coin to mine with these gpu's is ethereum unless you want to switch back and fort betwen coins everyday.
I am mining over 9 months now and mined around 15ETH with these 3 rigs alone.

If you buy all 3 miners i am delivering them to you free of charge.
If you buy only 1 the cost of shipping is 30€.

I am only shipping to: Austria, Italy, Croatia, Hungary, Slovenia. (My neighbour countries)
I dont ship via post because the items are fragile and will deliver them myself.
Or you can pick them up at my mining farm in Slovenia.

Price for 1 is 1300€
price for all 3 is 3200€.
Payment can be in crypto or fiat.
Picture:
http://shrani.si/f/1R/hq/2Ri0foA6/1/ethereum-ozaltcoin-miner.jpg

I have tested almost all the algos.
So far the most unstable are x16r and bitcore. They always crash or restart my compter.
all the other algos are running fine on +150 core and +500mem.
Also i am using nhsr miner for neoscrypt and its not crashing.
tested on nvidia 1070ti and 1060 6gb.

Could you at least make a choice where i could choose nhsr miner over klausT.
because nhsr miner was giving me like 5-10% better results with same overclocks and didnt crash at all.

Awesome. Any ETA?
And thx for the tip. Its just too much work. Because i would need to set OC for every algo...
What i also noticed is i dont get much benefit with OC'ing cards on x16r algo.
seems like i am not the only 1 with this problem.
problem is that other algos i get a big benefit with OCing them.

Source: https://www.reddit.com/r/Ravencoin/comments/8359pj/good_gtx_1080_overclock_settings/ (first comment by: grey tecko and 2nd by: bingelisLT)
some suggested enemy miner but its closed source and got deleted from github.

this software is awesome.
However i noticed that my rig is reboting when i have my 6x 1070ti overclocked to +140 core +500mem.
When using the x16r algo and tpruvot miner.
When i dont overclock it runs well.
The problem accours just with this miner.
Is there any other miners avaliable for x16r algo?

And how much mh/s do you guys get with 1070ti?
I get around 8000-11000MH/s with 100TDP and no overclock. It varies alot.
with 1060 6gb i get around 5500 MH/s

What pools do you guys use that are more profitable?

currently i am mining on zergpool as it has 0% fee.

Btw. Any 1 knows if i can install this miner on Linux. Specifically Ethos. Any1 tried?
I dont want to install windows on all these rigs. Too time consuming.

I love you man!

thx for adding Europe stratum so quick! (beer)

For me the fastest miner was cc miner from ClausT.
i get 1250 mh/s with +150 core and +500mem and +10TDP. on Asus Nvidia 1070ti

whats your hashrate?

As soon as cryptopia wallet was online the price crashed
This was expected

On the optimized CC miner I get
Nvidia 1070ti: 1350 hasrate
nvidia 1060 6gb OC version: 750

nvidia 1070ti
core: +150
memory: +600

1060 6gb oc:
core: +160
memory: 750

Running on windows 10. Previously i was running ethos but it gave me worse performance than windows for neoscrypt.

--> https://imgur.com/a/7DhSi

TZC is in a classical PUMP and dump stage it went from 0.2 cents to 0.7 cents and back down to 0.3 cents in matter of hours...
I have no idea where they buy and sell this as cryptopia aint working... and there is now way to sell my mined coins...

np.
Ok but the problem is that i have some matured coins for over 2 days here.
Will the wallet show me the matured coins in my wallet or will it be blank like it is now? if you look at the picture --> https://imgur.com/a/vVslU
And also if i shut down or restart my computer what does that do to the POS coins.
Because in the guides it just says that the comp needs to run 24/7.
Can you explain POS a little bit more.

Also what does this command do --> rpcallowip=127.0.0.*  -> do i have to input my local ip here? or is this my router (local connection)
do i just leave this or do i have to input numbers whre there is a *

Alt miner working great for me.

I did unlock my wallet.
It says wallet is encrypted and unlocked for staking only.
If you look at the pictures which i aded in the link.

I have a question about POS.
I am mining directly to the official trezar wallet for more than 2 days now. Before i was mining to cryptopia...

And i have configured everything like it says in the guide.
I have some coins which are over 2 days in my wallet.
And yet it says that the coins are not mature enough. staking paused.

i have added 2 pictures.

https://imgur.com/a/YKEel

and i have added the file trezarcoin.conf in the /data folder
rpcuser=*****
rpcpassword=*****
irc=1
dns=1
qtstyle=1                                                                            
daemon=1
server=1
stakegen=1                                                                  
logtimestamps=1
minersleep=2000
stakemindepth=2800
stakemintime=24                                                                  
stakecombine=40
stakesplit=80
port=17298
rpcport=17299
addnode=162.217.249.198:17298
addnode=46.4.0.101:17298

what am i doing wrong?

I checked cryptopias twitter and website and i didnt saw any related issues.
However i am having the same problem didnt get any payment for 2 days...
Any ETA when this wil get fixed?

I need to install the official trezor walet anyways to Stake my coins