Search content
Sort by
Showing 6 of 6 results by henrynguyen20
Hi
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017, 4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017, 4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate
Supposed to run at 21-22.x at stock. Are you supplying enough power to all the cards? Troubleshoot card by card.
Thanks for helping, I'm using Corsair 1200 Watt for PSU. I tried to uninstall drivers by using DDU and re-install again but they are still the same rate, all cables and risers are fine
Hi
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017, 4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate
Can anyone help me if there is something missing or doing wrong during the set up because I got a weird hashate
ok I got 3 MSI rx 570 4 GB (Elpida), 1 MSI Rx 580 4 GB (Elpida), 1 Asus Rx 580 8 GB (samsung), I set the virtual mem to 40 GB, window 10 version 1709
and I'm using AMD blockchain driver released on August 2017, 4G encoding enabled, PCI speed is gen 2 cuz I'm using Asus Z270 AR,
and all cards only run at 14 mh/s at stock, is it suppose to run at 19-20 mh/s at stock ? Thanks, I really appreciate
you need to provide more information if you need assistance.
i'd guess you are running amd cards and need the atipatcher + reboot.
should report correctly after that.
i'd guess you are running amd cards and need the atipatcher + reboot.
should report correctly after that.
Tried that.
6 x RX570
Latest AMD drivers
atipatcher ran and can mine with low hash.
I ended up rolling back to August block chain drivers as I could not get MSI Afterburner working.
use amd 17.10.2, change graphic to compute and then install AB, the only thing i didn't see AB working is voltage and everything else is working, that is working for me with MSI rx 570 4 gb
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.1 (Windows/Linux)
EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xc86bb711033e00abd01b197a57be42421678a987 -epsw x -eworker rig1 -allcoins 1 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal neverrazor.1 -dpsw x
Your hashrate is at ~50% of your's equipment normal performance. I thought that mining intensity was set wrong (ethi and dcri). After runing a short test, I found that GTX1060 are not very sensible to dcri level (at least DCR). Cranking DCR intensity from 40 to 130, the DCR hashrate increased 190% and ETH hashrate decreased 10%. Such dcri level, to halven the ETH hashrate, should be within 200-300 range, that is either stupid or unsupported by Claymore miner.Better define explicitly your ethi and dcri, say 16/40, 16/50.
Check your BIOS settings - enable Above 4G decoding/TOLUD (works only in UEFI-enabled systems) and PCI-E speed - switch it to Gen1 or Gen2.
i enabled 4g ... and tried different pci-e gen speed all same results ... the problem is ONLY in the hashrate of eth ... .. i tried another eth miner ... same problem
I seem to be having the same issue on my Asus Z270 board with 5 Rx 580's hashing all at around 23mg/h each, another one of my rigs with same config but older asrock H81 board and 6 rx 480 is 31mg/h each.
What version of Claymore do you use?
What AMD driver do you use?
Claymore Ver 10, Win 10 pro with latest Blockchain drivers. In fact prior to blockchain drivers I was only getting 21mg/h per card. I wonder if I'm only running 5 cards on a asus z270 if its still necessary to change bios settings on the motherboard? I'm thinking probably yes, which I did anyways. Also if I turn up settings in AB the cards go down to 18-19mg/h each
Did you use crimson 17.10.2 ?
Did you change the graphic to compute with AMD driver ?
Did you modded the bios with trap 1500 ?
Did you install ATIDAG fix?
Look for BBT videos of setting Asus z270 to see if you miss any step of bios setting
If Rx 580 hashing around 23mg/h, look like it's at original state without, It should get around 25.3 with bios modded (not using AB yet) I'm just listing some possible steps of setting for my2cent
I got rx 580 4 GB with -40 power limit and -100 mv voltage for hashing around 27.8 mg/h and I see that even power limit set, amd cards still pull more power
Thanks
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.1 (Windows/Linux)
any one here still have issue with stale share from ethermine.org ?
I'm getting 20% stale share with using claymore v10.0 with eth-only with rig of 8 cards
Also I have another rig with 2 msi rx 570 4Gb, 1 rx 580 4Gb, 1x 1060 6Gb and 1x 1050ti 4Gb and it pull 620 watts after modded and undervoltage, is it normal ?
Thanks
I'm getting 20% stale share with using claymore v10.0 with eth-only with rig of 8 cards
Also I have another rig with 2 msi rx 570 4Gb, 1 rx 580 4Gb, 1x 1060 6Gb and 1x 1050ti 4Gb and it pull 620 watts after modded and undervoltage, is it normal ?
Thanks