Search content
Sort by
Showing 7 of 7 results by hotdream1990
The new version is finally ready. You can download PhoenixMiner 5.8a from here:
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Windows.zip
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Linux.tar.gz
Changes in version 5.8a :
Please let us know if you have any problems or questions related to PhoenixMiner 5.8a
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Windows.zip
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Linux.tar.gz
Changes in version 5.8a :
- Added lock core clock
- Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
- Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused - Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
- Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
cclock -50 will set the core voltage to be 50 mV under the default value - Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700 - Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
- Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
operation of these cards - Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now) - Numerous other fixes and small improvements
Please let us know if you have any problems or questions related to PhoenixMiner 5.8a
Re: 🔥🔥🔥🔥🔥[GUNBOT] Automatic Poloniex Profit Generator🔥🔥🔥🔥🔥
Hi all,
I saw this profit calculator so clearly. : https://docs.google.com/spreadsheets/d/1BdmSXq92Fs_78QVk-cCSXABLhIy55-ia59nOGNoX9iU/pubhtml
Where can I get this one?
Thanks.
I saw this profit calculator so clearly. : https://docs.google.com/spreadsheets/d/1BdmSXq92Fs_78QVk-cCSXABLhIy55-ia59nOGNoX9iU/pubhtml
Where can I get this one?
Thanks.
@zcrewsmok: Could you show me what is code 43? Maybe I need the screenshot. I followed by this reply and it's working now. Let do by him steps.
https://bitcointalk.org/index.php?topic=1584617.msg15958294#msg15958294
@FlexiN: it's around 100-110W on GPU-Z. As I remember.
@vlcmstne: It's may not depends on PowerColor cards. I used @Eliovp rom and it works. But powercolor card may not better than other one.
Sorry I can't provide detail of @Eliovp. I did it. But now I used raidmax PSU for 6 cards. I think it not enough power for this. So I decreased rom setting to prevent problem.
@Eliovp thank you for your rom. It's very useful for me.
https://bitcointalk.org/index.php?topic=1584617.msg15958294#msg15958294
@FlexiN: it's around 100-110W on GPU-Z. As I remember.
@vlcmstne: It's may not depends on PowerColor cards. I used @Eliovp rom and it works. But powercolor card may not better than other one.
Sorry I can't provide detail of @Eliovp. I did it. But now I used raidmax PSU for 6 cards. I think it not enough power for this. So I decreased rom setting to prevent problem.
@Eliovp thank you for your rom. It's very useful for me.
Follow these steps
1: (while everything is at stock, so stock rom, stock driver) i execute this command first (as admin)
2: I reboot to safe mode(Hold Shift while clicking reboot) and i replace that atikmdag.sys file.
3: I reboot back into windows with that replaced atikmdag file. Windows should load perfectly, same for your drivers.
4: I flash my rom (command line atiflash, also as admin)
5: I reboot with signature checks disabled (also holding left shift while hitting the reboot button), you can do this in the next screen after you clicked reboot while holding left shift. You'll get a menu and you just do this. (same applies for Safe mode)
6: Everything should look perfectly fine when rebooted (i do not get the "test mode" message in the lower right corner. It just works
)
1: (while everything is at stock, so stock rom, stock driver) i execute this command first (as admin)
Quote
bcdedit /set nointegritychecks on
2: I reboot to safe mode(Hold Shift while clicking reboot) and i replace that atikmdag.sys file.
3: I reboot back into windows with that replaced atikmdag file. Windows should load perfectly, same for your drivers.
4: I flash my rom (command line atiflash, also as admin)
5: I reboot with signature checks disabled (also holding left shift while hitting the reboot button), you can do this in the next screen after you clicked reboot while holding left shift. You'll get a menu and you just do this. (same applies for Safe mode)
Quote
Troubleshoot > Advanced options > Startup Settings and click Restart
6: Everything should look perfectly fine when rebooted (i do not get the "test mode" message in the lower right corner. It just works
)Thank you so much. It works.
And more, do we have anyway to go to signature checks disabled permanently?
Hi @Eliovp and @ldw-com,
I used rom => http://www.mininghwcomparison.com/RX480-30MhOTB.zip
and atikmdag.sys file. http://www.win-raid.com/file.php?url=http%3A%2F%2Ffiles.homepagemodules.de%2Fb602300%2Ff16t892p30028n2_PQDCGzub.rar&r=1&content=RE%3A_AMD_and_Nvidia_GOP_update_%28No_requests%2C_DIY%29
But my computer doesn't detected graphic cards.
I used window 10 Pro. Ref PowerColor graphic rx480 8GB.
My steps is:
1. disable check and enable testing mode.
2. Restart and copy atikmdag file to system.
3. Restart and mode bios by ATIFlash 2.7.4.
3. Restart and check result.
Result is: bios is modded but graphic cards and radeon settings don't work.
Please help me.
I used rom => http://www.mininghwcomparison.com/RX480-30MhOTB.zip
and atikmdag.sys file. http://www.win-raid.com/file.php?url=http%3A%2F%2Ffiles.homepagemodules.de%2Fb602300%2Ff16t892p30028n2_PQDCGzub.rar&r=1&content=RE%3A_AMD_and_Nvidia_GOP_update_%28No_requests%2C_DIY%29
But my computer doesn't detected graphic cards.
I used window 10 Pro. Ref PowerColor graphic rx480 8GB.
My steps is:
1. disable check and enable testing mode.
2. Restart and copy atikmdag file to system.
3. Restart and mode bios by ATIFlash 2.7.4.
3. Restart and check result.
Result is: bios is modded but graphic cards and radeon settings don't work.
Please help me.