Search content
Sort by
Showing 9 of 9 results by iam1000fold
Thanks.
To disabling GPU number 1 I tried -di0, -di1, -di01 on start.bat and config.txt with no success
But in run-time (Running bat file) I pressed simply 1 an GPU number 1 disabled. result= (GPU #1: mining disabled)
I will appreciate if you tell me know how is disabling GPU number x from files before running?
To disabling GPU number 1 I tried -di0, -di1, -di01 on start.bat and config.txt with no success
But in run-time (Running bat file) I pressed simply 1 an GPU number 1 disabled. result= (GPU #1: mining disabled)
I will appreciate if you tell me know how is disabling GPU number x from files before running?
daycoin, how many GPUs do you have?
if you have three GPUs, and you want to disable GPU 1 then the code should be like this: (add this in your .bat file)
-di 12
for disabling GPU 2:
-di 02
for disabling GPU 3:
-di 01
(note: 0 = GPU1, 1 = GPU2 and 2 = GPU3)...this simply means that the GPU number in the code is the one that should be mining
hope this helps...
i am also experiencing this OpenCL error with my miner and still working and waiting on some possible solution....
Re: [BCN] Bytecoin. Secure, private, untraceable since 2012
guys i just would like to ask for some help regarding storing or running the bytecoin blockchain from an external drive, instead of the ~./bytecoin folder?
i only have 8gb free space and i just reinstalled my macOS and i need to download more than 9gb of blockchain files (blocks.bin and blockindexes.bin)
please help me on this...
thanks
i only have 8gb free space and i just reinstalled my macOS and i need to download more than 9gb of blockchain files (blocks.bin and blockindexes.bin)
please help me on this...
thanks
Has anyone successfully configured MSI RX 560 Aero 4GB OC Edition (Hynix)? If so what are you getting for speeds for ETH?
My Gigabyte RX 560 hynix is doing 13.5 ETH / 350 decred...
hi Branko...what strap timing have your change? do you also have the 1:xxxx and 2:xxxx timing straps? mine is also hynix (HIS RX560 4GB OC)...don't know what setup will i change with it because my gpu always hangs up when i tried to modified most of the settings...thanks
I always modify 2000 strap only , because thats what I'm shooting at...that way if it fails, AMD drivers always go back to original 1750
strap safely ...Gigabyte doesn't have 2 sets of straps, but for cards that do, You have to change just one that is relevant for memory on card
Branko here's a screenshot of my strap timings...but i don't know which one to modify...could you suggest which one to copy and where? any help will be greatly appreciated....thanks
https://www.dropbox.com/s/4mwfx5xd0q9qn0p/s1.png?dl=0
Has anyone successfully configured MSI RX 560 Aero 4GB OC Edition (Hynix)? If so what are you getting for speeds for ETH?
My Gigabyte RX 560 hynix is doing 13.5 ETH / 350 decred...
hi Branko...what strap timing have your change? do you also have the 1:xxxx and 2:xxxx timing straps? mine is also hynix (HIS RX560 4GB OC)...don't know what setup will i change with it because my gpu always hangs up when i tried to modified most of the settings...thanks
Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.
My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.
Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.
2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.
any advice? what's wrong with my setup/mod? please could someone help me on this.
i will be posting my moddedROM if someone would like to test it.
thanks in advance!
My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.
Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.
2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.
any advice? what's wrong with my setup/mod? please could someone help me on this.
i will be posting my moddedROM if someone would like to test it.
thanks in advance!
Did you run atikmdag-patcher-1.4.5 after you modded your bios. Also your card have Hyniz so you should use 1:1500 and 2:1500. I have only played around with a 570 so far but it has Hynix 4GB same as yoru 560's and I have it to 28.3 vs 22 it was at stock. I have some 560s coming in next week so will know better then about those
thanks for the quick reply SummersideGuy...yeah i did run the patcher once...it worked only for one gpu...the one connected to the hdmi where i manage to get 11mH...and i tried to do it again but it just ask me to revert to the default driver/setting...
I will know more once my 4 560s come in and I can experiment with them to see what you are experiencing. The 570 I have now is not hooked t my Monitor and it was the normal routine - Backup bios. modify bios, reboot, run patcher, reboot, good to go. I know from everything I read for Hynix to use line 1500 in your timings. It pushed my 570 up pretty high. I am hoping to get 14+ with the 560s when they get here. Not sure what memory they will have the are Asus Rog Strix models 4GB models. Once I have them and play around i will be able to assist you better
Thanks a lot...i will be waiting for that...i'll try to upload my gpu rom (the original one and the one that i modified) later when i got home. Again thanks for the time. I really appreciate it.
Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.
My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.
Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.
2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.
any advice? what's wrong with my setup/mod? please could someone help me on this.
i will be posting my moddedROM if someone would like to test it.
thanks in advance!
My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.
Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.
2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.
any advice? what's wrong with my setup/mod? please could someone help me on this.
i will be posting my moddedROM if someone would like to test it.
thanks in advance!
Did you run atikmdag-patcher-1.4.5 after you modded your bios. Also your card have Hyniz so you should use 1:1500 and 2:1500. I have only played around with a 570 so far but it has Hynix 4GB same as yoru 560's and I have it to 28.3 vs 22 it was at stock. I have some 560s coming in next week so will know better then about those
thanks for the quick reply SummersideGuy...yeah i did run the patcher once...it worked only for one gpu...the one connected to the hdmi where i manage to get 11mH...and i tried to do it again but it just ask me to revert to the default driver/setting...
Hi guys! I'm just new in crypto mining and started with a 4-GPU set for my rig. I don't have anything to pay you in exchange for a little help or reply but maybe somehow someone could share their knowledge concerning my setup, and it would be greatly appreciated.
My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.
Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.
2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.
any advice? what's wrong with my setup/mod? please could someone help me on this.
i will be posting my moddedROM if someone would like to test it.
thanks in advance!
My gpu is a HIS RX560 (Hynix) 4GB OC. I already tried to mod it one by one by copying the 1:1750 timing to 1:1875 to 2000 and 2:1750 all the way to 2:2200 and overclocked it core: 1250 and memory:2000 with +10 power. I managed to get 11.2mH/s in ETH claymore mining. I also tried other settings but that's the best i could get.
Here's my problem:
1.) whenever i plug-in the hdmi connector to the built-in (on-board) gpu...my mod setting in afterburner will not worked...everything is just 0...you cannot change the core, mem...everything...but all my 4 gpus were detected and it runs in its stock hashrate of 10mH.
2.)afterburner will only work if i connect the hdmi to one of the 4 gpu and then i could change the settings but only one gpu will only change in terms of hashrate, wherein i could get around 11.2mH while the other 3 gpu runs in its stock hashrate of 10mH.
any advice? what's wrong with my setup/mod? please could someone help me on this.
i will be posting my moddedROM if someone would like to test it.
thanks in advance!
hi guys!
anyone tried priviet's mod bios with a hynix memory?...i got HIS RX560 4GB OC card...and its running only in stock 10Mh/s...
and also everything is disabled when i used afterburner...
please help me on this...thanks a lot
anyone tried priviet's mod bios with a hynix memory?...i got HIS RX560 4GB OC card...and its running only in stock 10Mh/s...
and also everything is disabled when i used afterburner...
please help me on this...thanks a lot
Change the AB version, worked for me. As for the bios, I tried Micron bios on Hynix and didn't end well.
thanks for the reply...i'm using AB v.4.3.0.9267...may i know what version are you using? thanks
hi guys!
anyone tried priviet's mod bios with a hynix memory?...i got HIS RX560 4GB OC card...and its running only in stock 10Mh/s...
and also everything is disabled when i used afterburner...
please help me on this...thanks a lot
anyone tried priviet's mod bios with a hynix memory?...i got HIS RX560 4GB OC card...and its running only in stock 10Mh/s...
and also everything is disabled when i used afterburner...
please help me on this...thanks a lot