Search content
Sort by
Showing 8 of 8 results by illypso
For lyra2rev2, what's the best software miner out there for the 1080ti? I've been playing around with Alexminer, NemosMiner, and now I'm trying to see some other ones.. haven't quite gotten set up yet for lyra2 though, working on.
Alexminer give me the best result
To help chose, you can go to Zpool.ca
Chose the scrypt you want on the right and then chose miner at the top.
You will see what everyone use for the scrypt, so the one the most people use should technically be the best for it.
How are there no BTC transfer fees? When you transfer BTC you pay a BTC transfer fee. Sometimes upward of $25 USD! Can you set a threshold of say 0.1 BTC before transferring to your wallet? IF so how?
From what I understand from pool transaction, if they do all the payment at the same time, the cost of the transaction is divided among every miner and it become a little individual fee. If it would be "on demand" payment you would pay the normal fee.
Taken from ma790 on reddit:
Quote
"""An on-demand withdrawal with 1 input and 1 output has a size of approximately 192 bytes using current fees of 584 satoshis/byte that would require paying ~14.46 USD in fees for this transaction. On the other hand, a transaction with 1 input and 1000 output (meaning paying 1000 miner in on transaction) have a size of approximately ~34158 bytes and using the same fees of 584 satoshis/byte gives approximate fees to be paid ~2573.33 USD. Dividing this number by 1000 to find how much every miner has to pay is around 2.57 USD which is no big deal at all. If you used another coin, you will pay withdrawal fees and you will pay exchange fees and you will pay withdrawal fees again from the exchange so it is really not worth it at all."""
So I presume this fee is paid by ahashpool and it must be taken in there calculation on how many btc to give you at the start so you pay for it but its hidden and little.
More miner at payout = less fee
If I mine 0.008 BTC, they pay 0.008 BTC and I receive 0.008 BTC on my wallet, there is no fee at the transaction.
But they chose the payout time (each 24h) so my balance could go up to 0.011 BTC before their payout, they would pay 0.011 BTC and I would receive 0.011 BTC (no fee)
and there doesn't seem to have big delay with the transaction, I only got 2 payout from them but both time I got my BTC in my wallet less than 10 minute after.
Hi,
Great multimer, nice job.
I only find that when the miner switch algo, it close the miner, then start the other one.
There is some delay every-time so the GPU stop working for like 1 sec.
this give some loss.
If the new algo miner would start 1 second before the old miner close, could it solve this ?
The old miner would continue to mine while the new miner start and establish the connection.
Maybe they would work both for 1/2 a second but that should not cause problem.
You could maybe check and stop the old miner once the new one has an connection.
I no programmer but it seem doable.
Just an idea.
Great multimer, nice job.
I only find that when the miner switch algo, it close the miner, then start the other one.
There is some delay every-time so the GPU stop working for like 1 sec.
this give some loss.
If the new algo miner would start 1 second before the old miner close, could it solve this ?
The old miner would continue to mine while the new miner start and establish the connection.
Maybe they would work both for 1/2 a second but that should not cause problem.
You could maybe check and stop the old miner once the new one has an connection.
I no programmer but it seem doable.
Just an idea.
Hi can anyone post actual hashrate for 1080ti and win10 mining tribus algo? Cheers
184mh/s for 2x 1080ti
Thanks! Not bad at all! Is this on DNR?
DNR...?
I use
CCminerTpruvotcuda9 on ahashpool
Hi can anyone post actual hashrate for 1080ti and win10 mining tribus algo? Cheers
184mh/s for 2x 1080ti
For NVidia XZC mining use the latest CUDA9, x86 ccminer from tpruvot (currently 2.2.3) https://github.com/tpruvot/ccminer/releases
Don't forget to add
Don't use djm34 miner. It shows higher hashrate on miner, but actually performs worse in MPH.
It keep submitting previous job after block was mined. MPH actually rejects it but don't report it to the miner, just increases "invalid shares" counter.
Don't forget to add
Code:
--submbit-stale
parameter to BAT file. It will increase your hashrate at MPH a little bit too.Don't use djm34 miner. It shows higher hashrate on miner, but actually performs worse in MPH.
It keep submitting previous job after block was mined. MPH actually rejects it but don't report it to the miner, just increases "invalid shares" counter.
I try --submbit-stale but it always say unknown option, even with the one you linked
You don't need to set any environment variables for ccminer.
You mean those right ?
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
Ok thank you I will remove those, I did not see any gain by adding them and some post on internet report it was better (but it was probably placebo effect
) so I just put them because i did not loss hashrate eitherHi I have 2 gtx1080ti
Mining Zcoin (the best coin I found for 1080ti)(around 2050mhz each at 1025mv at 38degree)
on MPH (the best I found for this coin)
I get 6400KH/S on ccminer
But when locking at the Afterburner graph I see random drop in GPU usage.
I read the other post for the best ccminer (djm) I tried every one I could find and it seem the best but...
Do you all have this,
https://i.cubeupload.com/dhCS4l.jpg
I use the ccminer_cuda9 from DJM (30 247kb)
With this command line
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ccminerdjm_cuda9 -a lyra2z -i 19 -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u XXX.XXX
Is it normal, I just started so I did not had enough time to calculate if the hash rating from the ccminer match MPH but even if it match, the drop is a % loss of calculation power
Mining Zcoin (the best coin I found for 1080ti)(around 2050mhz each at 1025mv at 38degree)
on MPH (the best I found for this coin)
I get 6400KH/S on ccminer
But when locking at the Afterburner graph I see random drop in GPU usage.
I read the other post for the best ccminer (djm) I tried every one I could find and it seem the best but...
Do you all have this,
https://i.cubeupload.com/dhCS4l.jpg
I use the ccminer_cuda9 from DJM (30 247kb)
With this command line
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ccminerdjm_cuda9 -a lyra2z -i 19 -o stratum+tcp://us-east.lyra2z-hub.miningpoolhub.com:20581 -u XXX.XXX
Is it normal, I just started so I did not had enough time to calculate if the hash rating from the ccminer match MPH but even if it match, the drop is a % loss of calculation power