At my point of view, dual is not profitable, or the same as mono, except free socket. In my case mono mode takes apr. 800w for 6 cards RX480 and dual mode takes apr. 1050w.
you are mining the wrong dual than do you have tried ZIL in "custom" dual? give a try and you'll see the positive results
What do you mean by "custom"? For long time it's not profitable for me either.
I've got 8 x rx580 on 2x750W PSU - 1.1kWh 6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it. But is it possible with so much power left in PSUs?
If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think. It happened cuz 750W on PSU label does not give you efficiency of 100%.
Thank you for your reply. I should also mention that all of them are Platinum so highest efficiency possible.
And usually in both is same card every time.
If they are undervolted and clocked sensible, and you are not dual mining, your PSUs are not the problem. Is 1.1 and 0.9 what you measure at he wall? If you know what GPU it is that hangs, lower its memclock. Have you used Hwinfo to see if any GPUs generate a lot of hardware errors? A PSU can deliver its rated power and will pull more than that from the wall. You do not have to take the efficiency into account to find out what it can deliver. Running it close to 100% might not be a good idea tho.
Yes, these reading are from wall. Changing voltage and mmclock doesn't help with this problem. Checked so many times.
I've got 8 x rx580 on 2x750W PSU - 1.1kWh 6 x rx580 on 2x650W PSU - 0.9kWh
I've got GPu hangs everyday (also freeze windows) and read that PSU can fix it. But is it possible with so much power left in PSUs?
If you GPU overclocked and there is no low voltage mod, I think your PSU overloaded. My overclocked 6x570 farms are running on 2x775W PSUs and it is now about PSU's limit I think. It happened cuz 750W on PSU label does not give you efficiency of 100%.
Thank you for your reply. I should also mention that all of them are Platinum so highest efficiency possible.
I think it could move coin significantly once MN are introduced. I see coins without dev but with MN and many times market cap over CIF. This coin has potential and I would like others to see it.
This is great, this project has an airdrop as one of their campaign
A lot of airdrop participants are dumping their coins now they get the chance. These cheap cheap coins are gradually picked up by people who like the idea of setting up a masternode. I guess a masternode is not for everybody...
Yeah I hope for MN info soon.
Post
Topic
BoardMining (Altcoins)
Re: Mining Ethereum and getting 10% stale shares?! Wth!
Whats problem with mining pool?Its stopped at 76090 block, but current 76661
Same problem...
I'm fixing right now , the findblock cronjobs got stuck that's why the blocks stop showing on the pool front end, in a few minutes you will start to see all the blocks and your balance will update
Well, yobit.net is one of the very few supporting it and there it went down 72% in the last 24 hours. Don't expect that we will hear much about that fork in the future.
You can exchange but can't deposit: "No free addresses for such currency. Please try again in 2 minutes."
Post
Topic
BoardMining (Altcoins)
Re: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3
I have 2 D3s running on antpool. from yesterday I see this chart. is that normal? if not, is my d3s fault or pool's fault? under worker section my miners are working normal. https://s13.postimg.org/ixi37akav/chart.png
D3 owners, Do not despair, I am here to save you all. We have to unite!!!!
I have found the ultimate coin currently making about $4.50 / hour per D3 so roughly ~$100 USD per day per D3 since 6am this morning. Our saviour coin is B2X !!!
Don't say I do not contribute anything to this thread. Currently mining the living crap out of this coin with my 5 D3's!
using Temporary telegram wallet for now, till they release official wallets
is the pool stable?
p.s how to set up the d3? what should i put here? Password: c=
There usually is a few hundred people mining here on a regular day, but now there is over 5k users on the x11 pool alone ! Its unstable as hell because everyone including their mom, dad, goldfish and dog are trying to mine. My settings: c=B2X,d=96,n=DashMiner1
Post
Topic
BoardMining (Altcoins)
Re: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3