Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. - cclock -50 will set the core voltage to be 50 mV under the default value
Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper operation of these cards
Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
Numerous other fixes and small improvements
Please let us know if you have any problems or questions related to PhoenixMiner 5.8a
Hi guys Unang una sa lahat nag papasalamat ako kay theymos na nabigyan tayu ng chance na magkaroon ng sariling board At sa mga nag request para mag karoon tayu ng sariling board section.
Guys ginawa ko ang thread na to para sa mga kailangan ang sagot sa mga tanong nyu tulad ng kung paano kumita ng bitcoins sa forum nato o kung paano gumawa ng faucet or rotator o kung anu anu pa. basta tunkol sa bitcoin. Gagawin ko ang makakaya kong masagot sa mga tanong mo at mga kababayan nating members na pwede ring tumulong dito sa thread..
Ipost lamang ang tanong mo dito at susubukan natin lapatan nang tamang sagot...
Update: Guys wag kayo puro post make sure naman na check nyu ang mga post nyu dahil maraming nag rereport. Reread mo lang ang mga post nyu wag nyung madaliin.. warning lang to pero pag pinag pa tuloy nyu pa rereport ko sa moderator..
salamat po dito s tread n ito..tanong ko lang po halimbawa naka-rank up na ako.paano ako sasali sa signature campaign..at paano kumita doon..maraming salamat
Newbie here. Kakajoin ko lang recently and all I know is I should post and comment basta may sense ang sasabihin ko. Pero paano ako mageearn ng bitcoin?
natututo ako habang ngbabasa dito ah.salamat ng madami
Post
Topic
BoardPilipinas
Sa ngayon po.ano top paying faucet
by
jayrobelo
on 02/08/2017, 12:46:56 UTC
Ano po top paying faucet site nyo ngayon? Yung walang investment..