Configured for only GPU 1, GPU 0 has no issues. Additionally, x17 and x11evo seem to be the only off speeds.

Edit: I seem to have gotten my hashes all sorted out. I'm not sure what fixed it other than only benching while the other card is not mining. I'm running two instances of Nemo's. Two different cards mining to two different addresses. Now, when one is running, the second has trouble with the api bind to port 4068 and switches to 4069. For some reason, when that port fails, it will not report the correct bench. This happened on both cards running separately. When port 4068 fails, the reported benchmark speed is drastically higher than it should be.

Any idea what will cause this Nemo?

I tried this 3 times. Same results.

Keep us posted. I've always wondered if I should be running the 24hr bat.

I know it's not supported but my 970 reported running speed is 72.42MH/s whereas the actual running speed is 7.2 MH/s. The benchmark says 43 MH/s. So my marks for these are off by a factor of 10. Is there any way I can manually change that?

Edit: Actually both the reported and bench speed are 43MH/s and the actual effective speed is 7MH/s.

I've got 32GB of DDR3 installed.

Does anybody have instructions for how to increase virtual memory to 64GB as the front page says?

I would very much be interested in this script. Would you mind sharing?

Are you advocating for miningpoolhub or zpool as the preferred pool?

Why do so few algorithms load when I run startminingpoolhub as compared to startzpool? There are nearly three times as many algorithms running when I mine to zpool as when I mine to miningpoolhub.

I can't seem to get the worker to display properly. My two other workers using CPU miners work fine inputting the username.workername and password. The username.workername is passed to the miner in Nemos but the password that is passed is x. I know the pool says they don't use password but how can I get the pool to properly display my worker?

The worker name that is displayed on the hub is my username and it never shows it as active even though I know its mining and the balance is increasing.

Edit: Well I modified the PS to add the password but the hub still doesn't properly display the worker.

I know I just posted but I have another question. How can I pass a worker password to the miner through Nemosminer. The username and worker name get passed to it but I'm not sure how to add the password.

Nemo, is there a particular job on MiningPoolHub we are intended to select based off of the algorithms you have loaded?

Is there any service or notification system I can subscribe to to get notifications about updates to the miner?

Giving the beta a shot. Running a GTX 970 if you're wondering which additional cards the miner runs well with. Benchmarking now. Thanks for all you do.

Do you plan to have the same amount of algorithms in 2.3 as 2.2.2?

Those that are running zpool, are you finding zpool or zpool24hr to be more profitable in the long run?

Is there a way to configure the miner to switch algorithms if the stratum connection fails? My rig is trying to mine nist5 but it cannot connect. The alternative would be to manually disable the algorithm.

Thoughts on MiningPoolHub? I've been trying to get set up with a few different pools so I can check profitability at each one.  zpool has been crazy lately.

zpool seems to have the highest hashing power on quite a few algorithms.

Thanks for the fast responses. I've found my go-to miner. I've already had three friends switch from a couple other miners since we were trying to find an alternative after the Nicehash hack.

Thanks. I just read that a few replies up and was about to delete my post. Is there a way to make it not switch algorithms so frequently. I feel like I'm getting hit with the 2% fee on zpool repeatedly every time I switch algorithms. Is there a negative to this or does it equal out to the same fee over the course of the day?

That is, will there be fewer fees if the miner does not switch algorithms so frequently?