The  new  version  is  finally  ready.  You  can  download  PhoenixMiner  5.8a  from  here:

PhoenixMiner_5.8a_Windows.zip Github
PhoenixMiner_5.8a_Linux.tar.gz Github


Changes in version 5.8a :

• LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a

Bought from the seller and the code works. Will be buying again.

Recommend.

I can vouch for mikeywith

I've done a ton of business with him on coupons.

Probably over 100K USD worth of coupons now, he is legit.

Never any problem. From what I can see, Mike did say he got coupon first?

Everyone beware.

Potential scam.

I sent ~$120... then suddenly no reply.

I can get you one. check PM.

A bit too low. Sticking to $15 a piece if you are only buying 4 coupons. We can discuss discount when you are purchasing in volume.

Thanks.

Updated.


Hello,

Selling

• 380x $125 USD @ $15 USD each

Progressive discount with higher number of coupons, starting at 50x.

Escrow accepted, but only with $100 USD or above. I'm have traded many times on this forum, can check my feedbacks.

Prefer payment in LTC, BCH, ETH, BTC, in that order.

PM me if interested.

All sold. Thank you.

Hello,

I have the follow coupons for sale:

122x $100 USD @ $2.5 USD each
30x $125 USD @$15 USD each


Slight discount when purchased in bulk! But please be sensible about haggling, razor thin margins.

Escrow accepted, but only with $50 USD or above. I'm have traded many times on this forum, can check my feedbacks.

Prefer payment in LTC, BCH, BTC, ETH, in that order.

PM me if interested.

Interested.

Check PM.

Interested in $420 and $220. Also emailed you.

Thanks.

Interested.

Emailed. Pls check.

Check PM.

Still available?

Check PM pls.

I like these prices, too...

I would have tried to trade with the seller also, but I guess 61 LTC was just too big of a temptation.

Hope this works out in the end.

Interested in at least 2 accounts.

Please see PM.

The location is run by my friend; he thought he had the capacity.
But once these 2 were up and running, the circuit breakers were going on and off, and heating up.

So, I need to sell them. Trustworthy hosting in the city is hard to find and very expensive.

Best offer considered.

It's everyone's calculated risk when purchasing a miner.

The 4 Monero coins are not online yet. There is a good chance those will be meaningful to mine.

I would keep them if I had a good place to host them.

So, I have 2 of these A8 for sale. They have been running for 3 days, and they work fine.

The place I have it hosted is at capacity, and I don't want to have a miner running at home (4 month old daughter).

The machines are running quite well, running at above it's advertised rate (see pool stats).

• Asking price: $2300, per machine.
• Promised to ship within 24 hours of confirmed payment (to escrow)
• Escrow preferred
• Power Supply NOT included; I'm using a Bitmain PSU and they work fine.
• Shipping cost NOT included; I'm based in Hong Kong, and miner should arrive within 2-3 days (US, EU) with the fastest shipping

It is paying out ~$50 USD per day.
So, you may ask, why buy from me when you can buy A8+ directly from Innosilicon, few reasons:
1. Innosilicon will ship within a week AFTER payment; you payment will take 2-3 days to clear (China account), plus 1 week. A8+ is a hot item and all current stock is sold out (according to my sources), so you will most likely be getting it at the later end of that "week". - I ship within 24 hours - the earlier you get this machine, you earlier you start mining
2. There is a Min order of 5 machines from Innosilicon
3. You don't even have to worry about defect (shipping risk not include), as it has been running smoothly.

Model A8 Cryptonight from Innosilicon mining CryptoNight algorithm with a maximum hashrate of 160kh/s for a power consumption of 350W.

Specifications
Manufacturer:   Innosilicon
Model:   A8 Cryptonight
Release:   April 2018
Size   245 x 155 x 275mm
Weight   5990g
Fan(s)   4
Power   350W
Voltage   12V
Interface   Ethernet
Temperature   0 – 40 °C
Humidity   5 – 95 %

Pictures:
https://imgur.com/oZIXmcg
https://imgur.com/DXsjzAr
https://imgur.com/LAOh43L

I have all 3 types.

PM.

Hi, I'm based in Hong Kong, and I have range of Bitmain miners hosted in China.

S9, L3, A3 - 10 cents electricity cost.

I even have 2 A8's (innosilicon) hosted in Hong Kong at them moment.

I can switch them over within 12 hours.

Let me know if you are interested, then we can discuss pricing.

Thanks.