The new beta version is finally ready. You can download PhoenixMiner 5.7a from here:

PhoenixMiner_5.7a_Windows.zip (GitHub)
PhoenixMiner_5.7a_Linux.tar.gz (GitHub)



The new features in this release are:

• Added lock core clock
• The problem with the missing GPU temperatures on Nvidia GPUs is fixed
• Added native kernels for AMD RX6700 GPUs. These are faster than the generic kernels and produce a lot less stale shares
• Increase the max supported DAG epoch to 550 (should be enough to about Jan 2023)
• Full support for setting clocks, fan speeds, voltages, and memory timings of AMD RX6900/6800/6700 cards
• The specific hashrate is now shown in the form of kilo hashes per joule (kH/J). Example: if a GPU has hashrate of 30 MH/s with 100W power usage, the specific hashrate is 300 kH/J
• Added new command-line parameters -ttj and -ttmem, allowing automatic fan speed control based on GPU hotspot (junction), and memory temperatures respectively. Example: -ttmem 83 will keep the GPU memory temperature at or bellow 83C by increasing the fan speed as necessary. These parameters can be combined with -tt, as well as with each other. These options are supported only on AMD GPUs that report junction and memory temperatures
• Added new command-line parameters -tmaxj and -tmaxmem, allowing to decrease the GPU usage when the GPU hotspot (junction), or GPU memory temperatures are above the specified thresholds. These options are supported only on AMD GPUs that report junction and memory temperatures
• Added support for AMD Windows drivers 21.3.2, and 21.3.1
• Added support for AMD Linux drivers 20.50.x. Use this drivers only if you have Polaris or older GPUs, or the latest RX6x000 GPUs. WARNING: Vega, Radeon VII, and Navi GPUs won't work with these drivers!
• Turn off the zero fan feature on AMD cards whenever a fixed fan speed is used (e.g. -tt -40), or when an auto fan with min fan speed is used (e.g. -tt 63 -minfan 35). To disable this feature, add -fanstop 1 command-line parameter
• When -mcdag 1 is specified under Linux, the miner will not wait for the daggen.sh script to finish before starting to generate the DAGs. Instead it will for a fixed 7 seconds. This allows you to do all the following in the daggen.sh: turn off the overclocking of Nvidia GPUs, sleep for 30-60 seconds to allow time for DAG generation, and then re-apply the overclocking of the Nvidia GPUs
• Other small improvements and fixes

The support for -ttj, -ttmem, -tmaxj, and -tmaxmem for Nvidia 3090 and 3080 GPUs is not yet ready for release. We hope to have it ready for the final 5.7 release.

For more robust integrity check, you can use our GPG public key, which was verifyed with ETH transaction from our main devfee account as explained here: https://bitcointalk.org/index.php?topic=2647654.msg56755869#msg56755869.

Please let us know if you have any problems or questions related to PhoenixMiner 5.7a.

Hi,

you can try this to sync :
addnode=116.63.151.19:12945
addnode=37.47.11.126:12945
addnode=37.214.104.112:12945

But no exchange anymore... Yobit didn't sync their wallet for several years so deposit is not possible and support didn't answer.

thanks !

Is there still someone with a synchronized node/wallet

 

3 years too late... this coin was released in 2014 (before ICO hype) 

Is there any node active and sync ? 

Same problem here can't sync anymore

Hi !

I asked Yobit support why deposit/withdrawals are frozen and here is the answer...

Deposit\Withdrawal coin will be available after you upgrade the source code of the wallet. Unfortunately the developers are in no hurry to send you updates
- therefore, in order to avoid the loss of users, the network is not available.
If you have updated the source code of the coin, send us (https://yobit.net/en/maintenance_request/ Free)and we will promptly correct the problem on the coin.
Thank you for contacted the support

The max cap of the ICO is 5M $ right ?

This is what I understand with the FAQ : "12. How much funding do you need to consider the ICO a success?

To purchase 33% of the Starta Accelerator portfolio, we need to collect $1.5 million. If a smaller amount is collected, a proportionally smaller share in the portfolio will be purchased. If demand is higher, we will be able to sell up to $5 million of tokens, and any funds over $1.5 million will be invested in the next tranche of startups participating in the Accelerator."

Can you confirm ?

Already on Bter, gatecoin and Liqui... just need a trusted exchange now

listed in BTER since yesterday afternoon at least

Hi there !

IS there a way to know the current N-factor ?

Hi !

The guy who try to manipulate the APT rate on Yobit since few days is here ?   

I'm on the right fork and this was my Yobit address. All coins have been transfered but block explorer still show that there are 650k APT but there is none now. 

I have a question, why block explorer is late compared to network reality ?
For example : block explorer shows that there are 650k APT in this address http://45.32.231.128:3002/address/AQG1rDvz3MHtmaAfVGqUWCeVMmRnMarKa5 but I can tell you that all coins have been moved for a while (more than 10 days and many blocks)

I made 2 deposits and no one is credited (These are not my first APT deposits on Yobit). I opened a ticket 5 days ago and still no answer.
Moreover when I look at the APT wallet in Yobit the Wallet status is delayed  

Edit : I tried one more deposit this morning, still not working, wallet still delayed (wallet is at block 130919 when network is 131730) 

Really dead this time ? 

Explorer not online 
Deposits on Yobit don't work anymore 

Thanks for the advice


Thanks for the tip, it works !  

I can't get my coin from ICO with the command importprivkey. My wallet is well synchronized and I already have some coin on it thanks to mining.

Here is the error message :

I sent a PM to antho few hours ago but I suppose he is very busy or sleeping  

what is rpcport please ?