Search content
Sort by
Showing 20 of 23 results by jtkanpp2
Re: [OPEN - CUBE] batch #34 1.0 btc per CUBE 30Gh/s - 38Gh/s, 49 port hubs
Thanks!!
You actually can now sign with Coinbase, though I also just found it myself. Seems to work fine.
Go to Account Settings >> Bitcoin Addresses >> (Details) for your sending address >> "Click to sign a message with this address." at the bottom
Voila'!
Go to Account Settings >> Bitcoin Addresses >> (Details) for your sending address >> "Click to sign a message with this address." at the bottom
Voila'!
I am with you rob143. I would like to see larger miners, of course that would mean a larger financial commitment on our parts but I am ok with that.
I would actually like to see how much further this project can go. There are a few selling 100+ Gh/s miners based on this same chip there are the thumb drives of course I am sure there can be more derived from these chips once the first couple of batches roll out.
I finally got my bade going.
When I initially set it up I was using 10.0.1.60/255.255.255.0 as my IP address for the blade behind a PIX 515E firewall. It would start to get work right away but then within two minutes the blade would reboot due to not receiving any more work.
What I had to do was put a Linksys router between my pix 515E and the blade and use an IP of 192.168.1.x in order for it the blade to work as it should.
Just throwing that out there.
When I initially set it up I was using 10.0.1.60/255.255.255.0 as my IP address for the blade behind a PIX 515E firewall. It would start to get work right away but then within two minutes the blade would reboot due to not receiving any more work.
What I had to do was put a Linksys router between my pix 515E and the blade and use an IP of 192.168.1.x in order for it the blade to work as it should.
Just throwing that out there.
Thanks I will rebuild my power cord and try again.
In my (somewhat newbie) opinion, you've probably fudged up your power connector. Follow these detailed instructions here...
https://bitcointalk.org/index.php?topic=205369.0
And try making a new connector.
I honestly don't know what would make a Blade restart though except maybe heat. But I live in Phoenix and its literally 110F during the day so it gets hot in the house even with the air on and I've managed to keep 6 Blades running but nothing but 140mm PC fans blowing directly on the heat sinks.
You may also want to check your network connection. Don't do WiFi if you can help it.
https://bitcointalk.org/index.php?topic=205369.0
And try making a new connector.
I honestly don't know what would make a Blade restart though except maybe heat. But I live in Phoenix and its literally 110F during the day so it gets hot in the house even with the air on and I've managed to keep 6 Blades running but nothing but 140mm PC fans blowing directly on the heat sinks.
You may also want to check your network connection. Don't do WiFi if you can help it.
Hi there,
I just got a new version blade and I can't seem to keep it running. I have fans on it for cooling and it is running in a cooled room. There is only 1 blade on a new 650wt PS on a dedicated circuit. Sometimes it will run for around 10mins or maybe only 2mins but then it may even go for 45mins. I never saw it go over 5-6ghz. I am running against a mining proxy for Slush's pool.
Any thoughts?
I just got a new version blade and I can't seem to keep it running. I have fans on it for cooling and it is running in a cooled room. There is only 1 blade on a new 650wt PS on a dedicated circuit. Sometimes it will run for around 10mins or maybe only 2mins but then it may even go for 45mins. I never saw it go over 5-6ghz. I am running against a mining proxy for Slush's pool.
Any thoughts?
Re: [OPEN] - GROUP BUY of BITFURY Chips + DRILLBIT SYSTEM mining assembly
..... and Bam! They're all gone.
Thanks everyone for making this happen. I'm gonna do the final tallies soon and we may have a final release of a few more thumbs, maybe even a few more boards. Stay tuned.
Barntech.
Thanks everyone for making this happen. I'm gonna do the final tallies soon and we may have a final release of a few more thumbs, maybe even a few more boards. Stay tuned.
Barntech.
If you do decide to release more boards, could I swap my thumbs for 1 board?
If that would be an option I would like to know as well. :-)
Re: [12000 GH/s] Slush's Pool (mining.bitcoin.cz); TX FEES + UserDiff; ASIC tested
2 invalid blocks in a row 
19659 2013-08-18 00:43:31 0:24:25 12918777 3385 0.00626088 252722 25.00000000 invalid
19658 2013-08-18 00:19:06 0:41:44 21756147 5705 0.00652499 252730 25.44870012 invalid
19659 2013-08-18 00:43:31 0:24:25 12918777 3385 0.00626088 252722 25.00000000 invalid
19658 2013-08-18 00:19:06 0:41:44 21756147 5705 0.00652499 252730 25.44870012 invalid
252730 is reported as valid on Blockchain and attributed to Slush. Hopefully Slush will fix this one. The 252722 is defo a weird late one, and not found on Blockchain.
How does and Orphaned block happen?