Search content
Sort by
Showing 20 of 102 results by justoiurii
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
I have 580 8GB, 1070 ti, 1080ti on windows with no issues. 1080 ti is just under 39 mh/s. I tried phoenixminer and wasn't stable at all on my system and had lower hashrate than claymore on the green cards but increased on 580.
Could you share your phoenixminer overlock setting for RX580. Thanks in advance)Re: [ANN] TeamRedMiner 0.7.4 - Kawpow/Ethash/Cryptonight/Chukwa Thread
Hello, masters) Could someone point me for my RX480 8G best variants of cloking, driver etc. to mine ETH and gain better then Claymore. Thanks for advise)
Re: [ANN][PoW] PegNet: A CPU Mineable Stablecoin and Synthetics Network for DeFi
Hello, all) Could someone help me using wallet? I've got seed frase and see balance on explorer but can't see the same in factorial wallet( Why?
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
Let Claymore make its work. just add -strap 1 -rxboost 1 and no more any flags. see examples on topic
Hello,
This will not solved my incorrect ETH shares right ?
No test no result)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
Hello guys !
finally, I can't do it.. I'm going crazy, i'm giving up !..
Can't reach a right profil without "Incorrect ETH Shares" and same without tweak..
I don't understand how is it possible... I've got 6 Sapphire RX Vegas 64 Nitro+ and I cannot have a profil around 50-51 Mh/s without errors...
I've already try this :
Conf 1 :
GPU :
- P0 : 852 Mhz / 800 mV
- P1 : 1175 Mhz / 900 mV
- P2-7 : Disabled
Memory :
- P3 : 1100 MHz / 900 mV
- P0-2 : Disabled
-> Incorrect ETH Shares
Conf 2 BIS :
GPU :
- P0 : 852 Mhz / 800 mV
- P1 : 1075 Mhz / 850 mV
- P2-7 : Disabled
Memory :
- P3 : 1090 MHz / 900 mV
- P0-2 : Disabled
-> Incorrect ETH Shares
Conf 3 :
GPU :
STOCK
Memory :
STOCK
-> Crash then restart !
Conf 4 :
GPU :
- P0 : 852 Mhz / 800 mV
- P1-7 : Disabled
Memory :
- p3 : 1107 Mhz / 837 mV
-> Settings won't apply in Claymore (I've got 44 Mh/s)
WTF is that ? I don't understand what's wrong ...
My config file with Claymore :
If someone can help me to reach a good profil it very helpful or i'm gonna die haha
finally, I can't do it.. I'm going crazy, i'm giving up !..
Can't reach a right profil without "Incorrect ETH Shares" and same without tweak..
I don't understand how is it possible... I've got 6 Sapphire RX Vegas 64 Nitro+ and I cannot have a profil around 50-51 Mh/s without errors...
I've already try this :
Conf 1 :
GPU :
- P0 : 852 Mhz / 800 mV
- P1 : 1175 Mhz / 900 mV
- P2-7 : Disabled
Memory :
- P3 : 1100 MHz / 900 mV
- P0-2 : Disabled
-> Incorrect ETH Shares
Conf 2 BIS :
GPU :
- P0 : 852 Mhz / 800 mV
- P1 : 1075 Mhz / 850 mV
- P2-7 : Disabled
Memory :
- P3 : 1090 MHz / 900 mV
- P0-2 : Disabled
-> Incorrect ETH Shares
Conf 3 :
GPU :
STOCK
Memory :
STOCK
-> Crash then restart !
Conf 4 :
GPU :
- P0 : 852 Mhz / 800 mV
- P1-7 : Disabled
Memory :
- p3 : 1107 Mhz / 837 mV
-> Settings won't apply in Claymore (I've got 44 Mh/s)
WTF is that ? I don't understand what's wrong ...
My config file with Claymore :
Quote
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
"EthDcrMiner64.exe" -epool eu1.ethermine.org:4444 -ewal my_wallet -epsw x -eworker my_name -etha -1 -erate 1 -estale 1 -mode 1 -r 0 -tt 59 -tstop 80 -showpower 1 -showdiff 0 -platform 1 -y 1 -strap 4 -dcri 1,1,1,1,1,1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0
"EthDcrMiner64.exe" -epool eu1.ethermine.org:4444 -ewal my_wallet -epsw x -eworker my_name -etha -1 -erate 1 -estale 1 -mode 1 -r 0 -tt 59 -tstop 80 -showpower 1 -showdiff 0 -platform 1 -y 1 -strap 4 -dcri 1,1,1,1,1,1
If someone can help me to reach a good profil it very helpful or i'm gonna die haha
Let Claymore make its work. just add -strap 1 -rxboost 1 and no more any flags. see examples on topic
Re: NBMiner v26.2, GPU Miner for CKB, GRIN, AE, SERO, BTM, ETH, SWAP
Hello,DEV) I'm testing dual eth+ckb with v26.2 on my rx 480. Everything is Ok (27,5 Mh + 192 Kh = 120w), except connection to miningpoolhub. Could you check and fix, please? Thanks in advance)
OK. I set config manually and start testing. DOK, you are great again) your miner more power effectively than NB or sparkminer. I have 346 Mh/sec from rx480 and less than 100 w from the wall)))
Hello, DOK) Could you fix using ckb accound adress? Most pools in test phase using it.
I don't understand what should be fixed? Tested on sparkpool and hashpool, both work.
In guided-setup I can set only standart address 10-12 characters, but pools use id address
Re: [ANN] TeamRedMiner 0.5.9 - Cryptonight/Chukwa Thread - High hashrate, Low Power
Hi, DEV)
What driver would you recomend for RX480 8G? As I Understand, I can't use my bc driver for new x16rv2. And locking also, please: i use afterburner. Thanks in advance)
What driver would you recomend for RX480 8G? As I Understand, I can't use my bc driver for new x16rv2. And locking also, please: i use afterburner. Thanks in advance)
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)
Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
Hello, DEV) Is it possible dual mining SIA? For a long time SIA is being mined only with obelisk asic. Why you keep wrong information on the topic? Or am I wrong?
Re: PhoenixMiner 4.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Thanks a lot, friend) Could you share your additional parameters in .bat and lock values? Thanks in advance)
I can share my .bat. But what is "lock" values?PhoenixMiner.exe -pool pool -wal wal -pass x -worker w1 -stales 0 -cclock 1235 -cvddc 856 -mclock 2250 -mvddc 800 -gt 36 -mi 14 -log 0 -amd -tstop 75 -tstart 72 -clKernel 3 -clNew 1 -leaveoc
It's for Sapphire RX 580 8 Gb SE with hynix MJR memory.
-clKernel 3 - is for double kernels. Not for 4Gb cards...
P.S. -gt parameter is individual for each card. It depends on clocks and timings. Not depend on -REF. On -ref 5 and -ref 50 best -gt parameter will be the same. Best way to find optimal -gt value is to use autotune by "z" key during mining. It can last 5-10 minutes to auto find best value. Just be patient. When value will be found you can see it in stats by "s" key and add it in .bat file.
Thanks again. You helped to rise to 32,5 Mh/sec
Re: PhoenixMiner 4.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Dear PhoenixMiner,
I can not use -mt option. How to fix it?
Phoenix wrotes: "This works only on Windows and with relatively recent drivers (from the last 6-8 months)"I can not use -mt option. How to fix it?
Your 18.5.1 drivers is too old - allready more than year past...
If you have Windows 10 1903 use at least 19.5.1 driver. If not try 19.4.3.
... and what hashrate do you have on 19.7.3? On bc drivers for my RX480 8Gb I've got 31,5 Mh/sec. With Claymore - 32,5 Mh, but more power from the wall.
On phoenix I have a bit more speed than Claymore. If I use double kernels (2x more vram needed) I got additional 200-300 kH.
Phoenix allways faster Claymore with the same core and memory clocks even on usual kernels. If you get lower speed on Phoenix, you forget to find optimal -gt parameter values for your cards.
With use of AMD Memory Tweak Tool it's possible to get additional 500-1000 kH of speed.
One of my RX 580 8Gb cards - Sapphire with hynix MJR memory gives on Claymore 33,5-33,7MH/s with -REF 90 on AMD Memory Tweak tool. And 34,2 MH/s on Phoenix with double kernels. About 34MH/s with usual optimized kernels.
Thanks a lot, friend) Could you share your additional parameters in .bat and lock values? Thanks in advance)
Re: PhoenixMiner 4.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Dear PhoenixMiner,
I can not use -mt option. How to fix it?
Phoenix wrotes: "This works only on Windows and with relatively recent drivers (from the last 6-8 months)"I can not use -mt option. How to fix it?
Your 18.5.1 drivers is too old - allready more than year past...
If you have Windows 10 1903 use at least 19.5.1 driver. If not try 19.4.3.
... and what hashrate do you have on 19.7.3? On bc drivers for my RX480 8Gb I've got 31,5 Mh/sec. With Claymore - 32,5 Mh, but more power from the wall.