Translate to Russian, much appreciated!

No longer offering this.

I will scrape Telegram groups for you, free of charge.

So why scraping members from Telegram Groups?
It’s a nice opportunity to get attentions from related Telegram groups. You may want to scrape members from other related groups and add them to yours.

Requirements:
Telegram group must be public.
Telegram group not over 50000 members.
You promise not to engage in illegal activities.


Limits per user:
Jr. Member: 2 groups
Member: 3 groups
Full Member: 4 groups   
Sr. Member: 5 groups
Hero Member/Legendary: 10 groups



PM format:

Yes, in correlation to low volume, that price is true.
However, look at the order books, the ratio between buy and sell orders.
The EVN price will more than likely plunge to hell, if the volume goes up.

Also, EVN holds no value now, since the company is in the process of getting liquidated.
Only use for the token right now is for original ICO holders to recuperate some loss when the liquidation process finalize.

Hey,

Looking to buy 10000+ EVN tokens.
Pay in BTC or ETH.

My offer is up to 0.000005 BTC per EVN.

https://miningpoolstats.stream/bitcoinprivate
This is the best list I have found so far, look to the left for available Equihash coins and pools.

Bitmain must have messed it up to equip your Z9 mini with a 3000 RPM fan.
All mine Z9 minis from batch 1 came with 6000 RPM fans (Delta Electronics QFR1212GHE).

There are two different FPGAs available for mining purpose:
BCU-1525 and CVP-13

https://store.mineority.io/

Actually my initial plan were to make a cowl that could be attached to the back of Z9 mini with screws.
The design I'm using now is more like a prototype to check if things fit. Surprisingly the prototype fitted perfectly with duct-tape, so I just went with it and dropped the screws part.

Here is the STL file of the 3D model

The Z9 mini cowl looks like this:



The cowl(barely visible) duct-taped to Z9 mini:

Whats your ratio of accepted/rejected?
I consider anything below 5% as good.
Rejected shares can be caused by internet latency or pool side issue, not solely because of OC.

One of my Z9 mini OC to 700 has been running for 4 days.
Accepted/Rejected are 56564/55 which translates to less than 0.1%.
   

Saw your neat setup with the tent in another thread.
Wondering what noise level you get.

Hehehe just a man on the street trying to make a living.
The upside is that they run no more noisier than GPUs now, I can actually sleep without earplugs.

Depends on your setup and where you keep the Antminer(s).
The main reasons for me are heat extraction and noise reduction because I live in a one-room apartment running several Antminers in soundproof boxes.

If you attach a hose to Z9 mini without an extra exhaust fan, the intake fan would have to run at max fan speed most of the time to be able to keep the Temp(Chip) under 85.

I couldn't get a hold of the backplate either, I asked around local mechanical workshops, all quoted me $200++ for making such plate in aluminium.
If you know someone with access to a CNC then maybe you can get it done for a reasonable price.


In my case, I 3D modelled a fan mounting bracket( aka cowl) and got it printed locally ( 3dhubs.com), it costed about $15.
The cowl is attached to the backside of the antminer with duct-tape.
The hose you are referring to is called a duct, sonodec on the other hand is a hose.
The duct is attached to the fan, and the fan to the cowl. M4 screws, nuts and washers can be obtained locally.

So my setup goes like this:
flexible hose -> duct -> exhaust fan -> cowl -> Z9 mini -> intake fan


I can upload some pictures later once I get home.

The fan on Z9 mini is both High static pressure and High CFM.

In push configuration the fan pulls in air from the open with nothing resisting and allows more air to push the heat away from the heatsinks.
When you set the fan to pull air out of the Z9 mini, the components inside cause blockage which slows the fan down.

Pull or Push configuration on High static pressure and high CFM fans should produce similar results.

I have a Z9 mini myself and seen the inside, there is no way for an exhaust fan to be more efficient than an intake fan, placed either side of the Z9 mini.
Pulling air out of Z9 mini is like placing a dense fabric air filter in front of the intake, restricting the airflow and reducing the efficiency.

Those readings are working against physics and definitely not accurate.

Lol, what a troll.
There is no fucking way to decrease the temp as you claimed just by reverting the intake fan.
The air flow will be so restricted, I wouldn't be surprise if the Z9 mini reaches the cut off temp.

Hey,

Have 100 x Bitmain $100 coupons for sale, expiration date 31 July 2018.

Price:
Depending on quantity, 4 - 10 USD per coupon,

Payment:
BTC or ETH .

Coupon works on every Antminers.
Only one coupon can be applied per Antminer.

You have to register your email with Bitmain before coupon transfer can be taken place.
Coupon will be transferred to you once payment is confirmed.

I am getting about 3.3 ZCL / day , 15k sol on miningpoolhub.com