P.S.
Efficiency is lower at -brd_ocp 30 than with eco mode.

Electricity from the wall / pool
-brd_ocp 3 125W / 3 THs = 41 W/Ths
eco mode 225W / 5,8 THs = 38 W/Ths

THANKS its works

I need command for CLI

.\apollo-miner-v2.exe -host XXX -port 3333 -user XXX -pswd x -comport COM3 -powermode eco -ao_mode 1

Hello
I have Apolo2 standard unit. In winter I use standard mode, in summer eco mode.
Is there a custom mode "super eco" for summer (less heat)?

22.000 nodes
https://bitnodes.io/

I own some btc so I want a secure system (network) for my money. Who provides greater network security, your own full node or your small miner.
I run BTC full node and run 50THs miners, conencted on small pool (kano).

Thank you for this Willi.
I point one miner.
I hope we get a lot of luck to get the block.

Great job.

EU pool still down?

Apollo2 standard unit on Kano pplns pool
Balance mode app. 5 mounths
diff 4,859
shares 7,594,112   
diff 29,874,444,690
share rate 6.93THs
invalid 0.244%
hash rate 7.38THs
best 12.3G

From wall 320W / 7,4 = 43 W/THs
Eco mode 38 W/ THs
my old S17pro on low power mode 39 W/ THs

Apollo2 in NOT Eficientcy as they say (28 W/THs on www)
Im sorry I bought it.

I dont understant why more people didnt buy standard unit, its more cheaper then full node unit, I run on my computer with Windows, works OK. Its true that you cant mine solo on your ovn node but you can use solo pool (kano, ck). On the same computer I run BTC full node on Windows, costs me only 2TB SSD disk. If I be more comp freak I can mine with standard unit to ovn node.

Hi Willi
My second device for user kekeck33_2 is Bitaxe ULTRA BM1366 (not Nano3).
Happy mining to all.
For christmas I wish to find a block in our race.
Regards
 

Great job Will.
I move my miner from USA to EU (Im from EU).

It was bad PSU.
I use one from T17, its not 100% compatible but its working.

Is problem with PSU or hasboards?

2023-01-22T09:53:39.906480Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/1: Waiting for voltage to settle (measured 0.26 V, expected 21.00 V)
2023-01-22T09:53:39.906569Z ERROR bosminer_backend::hashchain: CHAIN/1: Init failed: SHORT CIRCUIT - measured voltage 0.26 V
2023-01-22T09:53:40.042441Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/2: Waiting for voltage to settle (measured 0.25 V, expected 21.00 V)
2023-01-22T09:53:40.042509Z ERROR bosminer_backend::hashchain: CHAIN/2: Init failed: SHORT CIRCUIT - measured voltage 0.25 V
2023-01-22T09:53:40.104880Z  INFO bosminer_backend::hashchain: CHAIN/3: Fans OK
2023-01-22T09:53:40.107214Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/1: Disable voltage
2023-01-22T09:53:40.236883Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/3: Waiting for voltage to settle (measured 0.26 V, expected 21.00 V)
2023-01-22T09:53:40.236970Z ERROR bosminer_backend::hashchain: CHAIN/3: Init failed: SHORT CIRCUIT - measured voltage 0.26 V
2023-01-22T09:53:40.243826Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/2: Disable voltage
2023-01-22T09:53:40.438399Z  INFO bosminer_am2_s17::hardware::hashboard::power::antminer: PWR/3: Disable voltage
2023-01-22T09:53:41.251828Z ERROR bosminer_backend::miner: CHAIN/1: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V)
2023-01-22T09:53:41.355205Z ERROR bosminer_backend::miner: CHAIN/2: Start failed: Other(SHORT CIRCUIT - measured voltage 0.25 V)
2023-01-22T09:53:41.540474Z ERROR bosminer_backend::miner: CHAIN/3: Start failed: Other(SHORT CIRCUIT - measured voltage 0.26 V)

When I dont need all the hashboard in the asic miner (heating) I just unplag (cable) hasboard from the control board.

Im on kanopool pplns, more nodes over the world, block once a year but you never know when is the next one.

C9ntrol board from T17+ is not working in S17pro (firmware updated)

T17+ control boar Bitmain AMCB07_4x1_4F_VER2.1
S17pri control board AMCB07_3x1_2F_VER1.4

Can I use control board from T17+ in S17pro. They don't look the same.