Ninjastic
Search content
Sort by
Showing 5 of 5 results by kennypham8x
Post
Topic
Board Mining (Altcoins)
Re: Modified GPU BIOS for Mining
by
kennypham8x
on 05/01/2018, 18:02:31 UTC
@nobatman
I tried your bios for a while and saw the high temperature of 2 cards with 60c and a card with 65c
i set the fan 80-100% and it ran 70% (gpu_z)
Then I tried the tool xmr_stak_amd(of nicehash) and found it ran at 347-350 / s but the temperature was lower than the claymore about 5c for each power card is also lower
And there is something interesting when i try to use msi_ab set core at 1024 speed does not change and the temperature continues to decrease
can you help me again with better bios using with xmr_stak_amd
i'm really sorry to bring you troubles
I have a plan with rx560 so I try to run it as stable as possible, where I'm at rx470, 480, 570, 580 cards are expensive to buy agents and a card that can almost buy 3 rx560 card so i plan to set up the rig with rx560
Post
Topic
Board Mining (Altcoins)
Re: Modified GPU BIOS for Mining
by
kennypham8x
on 05/01/2018, 13:01:50 UTC
Quote from: notbatman on January 04, 2018, 07:04:07 PM
mods:

MSI.GamingX+RX580.8192.170321_1_MINING_BIOS
PowerColor.RedDevil.RX560-4GB.EXPERIMENTAL_BIOS
i'm doing test your bios
first i'm intall Adrenalin drivers 17.12.2 and use claymore 11 my it run at 364h/s/vga
but i offen use nicehash miner( for vga & cpu E3-1230v2 220h/s) and it can't detec my vga
then i try intall Adrenalin driver 17.11.4 and use claymore of nicehash it run 374h/s/vga
i run it 3h ago, just waiting and hope it run stable
thanks u alot for everythings
p/s: someone say with me use nicehash miner is enable xnsub, if only use tool it don't enable xnsub, that's right?
Post
Topic
Board Mining (Altcoins)
Re: Modified GPU BIOS for Mining
by
kennypham8x
on 04/01/2018, 17:54:47 UTC
Quote from: notbatman on January 04, 2018, 04:51:49 PM
^^^ You need to run the fans at 80-100%, check GPU-Z and you'll see the memory running at 120 deg C. PowerColor really packs their cards full of sensors.

I'll make you BIOS that runs the memory at 1875, I think that was the magic number. I'll post it in a bit.
my ver. gpu_z i use not display memory temp, so i don't known it so hight @@
with your bios you will post, must be use msi_ab ?and how to config it?( power limit, core clock, mem clock)
Sorry for my awkwardness, i just started to learn mining for a short time
Post
Topic
Board Mining (Altcoins)
Re: Modified GPU BIOS for Mining
by
kennypham8x
on 04/01/2018, 16:32:18 UTC
Quote from: notbatman on January 03, 2018, 08:03:15 PM
Quote from: kennypham8x on January 03, 2018, 06:33:21 PM
Notbatman can u help me mod my bios gpu for stability
I bought vga PowerColor AMD Radeon RX 560 RED DRAGON 4GB GDDR5(AXRX 560 4GBD5-DHA) miron_hynix(my vdram Hynix)
it's clock Shader at 896 and i use other bios up to 1024
I use Claymore CryptoNote AMD GPU Miner v11.0 and msi_AB set core clock 1024; mem clock 2048 speed 396H/s, if power limint +10 it over 400H/s
but it not stability
Somethime one of its drop to 300H/s or down to 0H/s
my orig bios:https://drive.google.com/file/d/1_aDlR0zURKsSvYa28EGK9d6Kvl5PQqbJ/view?usp=sharing
i'm use this:https://drive.google.com/file/d/1R5jG_pceSTh7uKUeQvp-UdBtRUqelVFm/view?usp=sharing

You're in luck, I've got PowerColor RX560-4GB Mining OEM (Hynix) cards. The little darlings were a beast to tame but I got them very stable at 400 H/s (Claymore v11.1). They're aslo relatively good on power but I don't have any real numbers except GPU-Z.

The red devil should be the same card but with a different plastic shell.



edit:

How very odd, both the ROM on my hard-drive and the post I made about it here to share the ROM are gone. Only an older less stable version remains... except for in the cards EEPROM and they're currently mining.


edit_2:

You'll have to wait 'till later, I can't remember what frequency I stabilized them at...
yes i will wait for good news from you, hope it will be more stable, i am a new person who has lost a lot of time, but still can not stabilize it
Post
Topic
Board Mining (Altcoins)
Re: Modified GPU BIOS for Mining
by
kennypham8x
on 03/01/2018, 18:33:21 UTC
Notbatman can u help me mod my bios gpu for stability
I bought vga PowerColor AMD Radeon RX 560 RED DRAGON 4GB GDDR5(AXRX 560 4GBD5-DHA) miron_hynix(my vdram Hynix)
it's clock Shader at 896 and i use other bios up to 1024
I use Claymore CryptoNote AMD GPU Miner v11.0 and msi_AB set core clock 1024; mem clock 2048 speed 396H/s, if power limint +10 it over 400H/s
but it not stability
Somethime one of its drop to 300H/s or down to 0H/s
my orig bios:https://drive.google.com/file/d/1_aDlR0zURKsSvYa28EGK9d6Kvl5PQqbJ/view?usp=sharing
i'm use this:https://drive.google.com/file/d/1R5jG_pceSTh7uKUeQvp-UdBtRUqelVFm/view?usp=sharing