Search content
Sort by
Showing 20 of 208 results by kirilvvbg
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v11.7 (Windows/Linux)
Hi Claymore,
Can you add new event in EthereumManager - about rejected shares.
Not sure if it could be managed by user - to target specific ratio accepted/rejected, to put some limit, etc.
Or at least to be preset by you - rejected shares as % of the accepted.
The point is to get notification that a GPU is not working properly for some reason (pool, clock, whatever).
So that a proper action could be taken.
I hope you understand my desire.
In case that this is already possible in the remote manager - sorry for bothering. But please point how to do it.
Thanks
KVV
Can you add new event in EthereumManager - about rejected shares.
Not sure if it could be managed by user - to target specific ratio accepted/rejected, to put some limit, etc.
Or at least to be preset by you - rejected shares as % of the accepted.
The point is to get notification that a GPU is not working properly for some reason (pool, clock, whatever).
So that a proper action could be taken.
I hope you understand my desire.
In case that this is already possible in the remote manager - sorry for bothering. But please point how to do it.
Thanks
KVV
Re: [ANN] [1080 | 1080TI] ETHlargement - The Hashrate Hardener
The only thing is when if Rig went "dead" I cannot do the bat file for start up to auto start..
Same with me...
Re: 【ANN】【PIRL】【PoW ETH Masternode Asic Resistant】 ►► NO PREMINE - NO ICO ◀◀
Network difficulty grows exponentially 
Where you get info 'bout difficulty?
First results are in for GTX 1070Ti:
Stock @ 465 sol/s
Stock @ 26,6 MH/s
Clocked @ 515 sol/s and Power consumption is arround 190W.
Clocked @ 32,0MH/s
Model tested: GV-N107TGAMING-8GD
https://www.gigabyte.com/Graphics-Card/GV-N107TGAMING-8GD#kf
Comparing with GTX 1070:
Stock @ 440 sol/s
Stock @ 26,5 MH/s
Clocked @ 465 sol/s and Power consumption is arround 150W.
Clocked @ 31,8 MH/s
Model tested: GV-N1070G1 GAMING-8GD
https://www.gigabyte.com/Graphics-Card/GV-N1070G1-GAMING-8GD-rev-20#kf
Have a good day
Stock @ 465 sol/s
Stock @ 26,6 MH/s
Clocked @ 515 sol/s and Power consumption is arround 190W.
Clocked @ 32,0MH/s
Model tested: GV-N107TGAMING-8GD
https://www.gigabyte.com/Graphics-Card/GV-N107TGAMING-8GD#kf
Comparing with GTX 1070:
Stock @ 440 sol/s
Stock @ 26,5 MH/s
Clocked @ 465 sol/s and Power consumption is arround 150W.
Clocked @ 31,8 MH/s
Model tested: GV-N1070G1 GAMING-8GD
https://www.gigabyte.com/Graphics-Card/GV-N1070G1-GAMING-8GD-rev-20#kf
Have a good day
Confirmed... Disappointing results, let's hope miners could be optimised... Cause at the moment it seems there is no difference between 16 and 19 compute units...
New 10.2 is not good for all cards, it seems...
Just tested on my old Pitcairn R7 370 2GB
On v9.7 - 490-495 h/s
With new 10.2:
- if I start directly default -dmem tries 2.5+ GB of memory - obviously it doesn't work and miner gets stuck
- if I disable -dmem (-dmem 0), the best I can do is -h 832, but in this cases the h/s are only 475-480 (btw, Claymore - GPU0 must stay at -h 480, otherwise it crashes; but still gets these 480 h/s).
So it's not an improvement, but the opposite...
Unfortunately, good features and info of v10.2 cannot not be used... I'm sticking with 9.7...
Just tested on my old Pitcairn R7 370 2GB
On v9.7 - 490-495 h/s
With new 10.2:
- if I start directly default -dmem tries 2.5+ GB of memory - obviously it doesn't work and miner gets stuck
- if I disable -dmem (-dmem 0), the best I can do is -h 832, but in this cases the h/s are only 475-480 (btw, Claymore - GPU0 must stay at -h 480, otherwise it crashes; but still gets these 480 h/s).
So it's not an improvement, but the opposite...
Unfortunately, good features and info of v10.2 cannot not be used... I'm sticking with 9.7...
I think I am not a newbie account, and for the second time I will declare that the drivers are good and working (for me on 570 and 580).
About the hashrate - see the picture of one of my rigs (6x RX 580 8 Red devil): average is constantly improving ad at the moment is even higher then the reported!!! (never seen this before)
http://imgur.com/a/LEqwj
Robinh00d - thank you very much, appreciate it. There is still hope for the community...
About the hashrate - see the picture of one of my rigs (6x RX 580 8 Red devil): average is constantly improving ad at the moment is even higher then the reported!!! (never seen this before)
http://imgur.com/a/LEqwj
Robinh00d - thank you very much, appreciate it. There is still hope for the community...
Claymore 9.7 also works.
About higher power consumption - all folks that are reporting it: please check it "at the wall" with wattmeter. AB is showing higher digits, but at the wall there is no change. So my conclusion is that this is caused by new beta AB.
Unfortunately for me, I didn't manage to make the driver work on WIN8.1, I was able to do it only on WIN10.
Hasherates are up, for sure: Sapphire 570/4 was 27.9 now is 30.0.
About higher power consumption - all folks that are reporting it: please check it "at the wall" with wattmeter. AB is showing higher digits, but at the wall there is no change. So my conclusion is that this is caused by new beta AB.
Unfortunately for me, I didn't manage to make the driver work on WIN8.1, I was able to do it only on WIN10.
Hasherates are up, for sure: Sapphire 570/4 was 27.9 now is 30.0.
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.6 (Windows/Linux)
@Claymore - very grateful for improvements in EthManager. The last version is almost perfect for me.
I would like to make a suggestion - if it's possible and doable. Can you some how add in the 'Events' new one - for incorrect share (due to too much overclocking)? Maybe in some of the updates to come?
I am not even sure why this happen, but sometimes some rig starts to give way too much incorrect shares. And after a PC restart - all goes back to normal.
Am I the only one having problems with incorrect shares?!
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.6 (Windows/Linux)
During final tests I noticed some problems, so I have to postpone new version for a day.
@Claymore - very grateful for improvements in EthManager. The last version is almost perfect for me.
I would like to make a suggestion - if it's possible and doable. Can you some how add in the 'Events' new one - for incorrect share (due to too much overclocking)? Maybe in some of the updates to come?
I am not even sure why this happen, but sometimes some rig starts to give way too much incorrect shares. And after a PC restart - all goes back to normal.
Re: [ANN][ZEN] ZENCASH: Permanent, Distributed, and Fully Anonymous cryptocurrency
If i buy zclassic now on bittrex can i hold the on bittrex the swap?
The swap is already done.
Buying zcl now wont get you zencash
Are you sure?
Because the OP says this:
Quote
Buy or Mine Zclassic until May 23rd, 2017 2300 UTC to get ZenCash 1:1.
Hello All.
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked
.
1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117" to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.
You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work.
I know that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm.
I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution.
Sorry for my English and grammar.
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked
. 1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117" to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.
You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work
.I know that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm.
I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution.
Sorry for my English and grammar.
Anybody tried this on windows 8.1 x64?
I do the same replacement of driver files, but there is no compatible model for RX570...
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v9.0 (Windows/Linux)
Please help - I cannot figure out EthMan: on some of my rigs it is working perfectly. But in some it says (in red):
Remote management: read-only only, command miner_restart ignored.
Where is the problem? Claymore?
Remote management: read-only only, command miner_restart ignored.
Where is the problem? Claymore?
Re: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v8.1 (Windows/Linux)
Any suggestions why (after 3 hours of steady mining) I got this message:
Quote
Cannot get Overdrive capabilities for adapter 0
Cannot get Overdrive capabilities for adapter 6
Cannot get Overdrive capabilities for adapter 12
Cannot get Overdrive capabilities for adapter 18
Cannot get Overdrive capabilities for adapter 24
Cannot get Overdrive capabilities for adapter 30
Cannot get Overdrive capabilities for adapter 36
Cannot get Overdrive capabilities for adapter 6
Cannot get Overdrive capabilities for adapter 12
Cannot get Overdrive capabilities for adapter 18
Cannot get Overdrive capabilities for adapter 24
Cannot get Overdrive capabilities for adapter 30
Cannot get Overdrive capabilities for adapter 36
Yeah Fury needs to be on older drivers...if you have newer ones, then I think V10 is the best, with 395 sol/s. Nice speed increase for 390s and 280x, although after fees its pretty similar to optiminer. Should we expect another update soon ? I have some trouble to get optimum speeds with tongas, optiminer gets better results at 225-230 sol/s so far. Maybe i'm missing something.
Yeah I did not concentrate on tonga cards.
I can reach 430H/s on stock 390X. Or I can try to add Pascal coin to dual miner, or improve CryptoNight miner. Need to select.
CryptoNight it should be - less power consumption (more will use it), stable price (constant revenues), long time since last improvement...