Search content
Sort by
Showing 20 of 140 results by ktbken
Look like Gigabyte Windforce 7950 VRM-Flamer Specials to me...
LOL so true
Re: MinerEU.com 850USD THunderX3 80 USD Blizzard , 4*Blizzard @ 60 USD each
Seems their site is dead now...pointing to some educational website.
Dead for me as well
so now there no where in the UK where you can get miners (some did work)
I spoke to them late last night uk time and they said they where having web site issues before site when down for maintenance
There is also a fake email doing the rounds offering 70% of the a2 miners be careful
Re: [600 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool
p2coins.com:9332 has 81% effie 
Very bad node.
Very bad node.
Has been over 100% consistently till I restarted node recently and had a few mad 25Ths miners on. It will recover
I run all my asics on the Odroid u3 from here http://hardkernel.com/main/products/prdt_info.php. which uses the Exynos quad core cpu.
They run standard linux, don't have usb issues like the PI and run bfgminer, cgminer, minera and assorted other miners with no issues.
They run standard linux, don't have usb issues like the PI and run bfgminer, cgminer, minera and assorted other miners with no issues.
Re: The Habanero - 650GH/s - Batch 2 Shipping June 9th, $850 ($1.3/GH/s)
I would avoid the beaglebone for now, it has a hot plus usb issue that doesnt seem to be fixed even in some of the beta kernels.. anyhow just my 2 cents since I tried to get one working and just gave up.
It's running fine for me on the 5-14 Debian firmware. Are you running an Angstrom release?
The odroid u3 is a good alternative http://hardkernel.com/main/products/prdt_info.php I ditched all my pi for them due to usb issues
Hey michelem
is there a way to monitor and restart the miner when a device goes down, i'm really having a hard time, i always have blade going down every few hours, and have to restart cpuminer to bring them back up.
it's not the hub, i've tried different hubs.
is there a way to monitor and restart the miner when a device goes down, i'm really having a hard time, i always have blade going down every few hours, and have to restart cpuminer to bring them back up.
it's not the hub, i've tried different hubs.
Try lowering the clock speed a bit worked for me on one fussy blade
does the g blade mine x11 and or n-factor ?
NO scrypt onlyRe: MinerEU.com G-BLADE＊2 bundel @ 1480 USD shipping Worldwide
Hi
I ordered late on the 28th and received my order today in the UK, fast delivery only issue is there are only 2 blades not 4
help can you look at order order No #1739 as its showing as complete on site.
Thanks
I ordered late on the 28th and received my order today in the UK, fast delivery only issue is there are only 2 blades not 4
help can you look at order order No #1739 as its showing as complete on site.Thanks
All sorted other 2 shipping monday
Re: MinerEU.com G-BLADE＊2 bundel @ 1480 USD shipping Worldwide
Hi
I ordered late on the 28th and received my order today in the UK, fast delivery only issue is there are only 2 blades not 4 help can you look at order order No #1739 as its showing as complete on site.
Thanks
I ordered late on the 28th and received my order today in the UK, fast delivery only issue is there are only 2 blades not 4
help can you look at order order No #1739 as its showing as complete on site.Thanks
Re: PRE [ANN] CureCoin development continues.... Still no coin in the account
I've been folding almost 2 weeks now. A couple hundred work units and 90k points. Nothing is showing in the cryptobullionmining dashboard.
I sent an email to cryptobullionmining@gmail.com late last week no response that I've seen. Tried signing up on the curecoin.us board but it wanted me to verify team name and number. I didn't join a team yet so all I had was, Team 0 and no name.
Thanks
I sent an email to cryptobullionmining@gmail.com late last week no response that I've seen. Tried signing up on the curecoin.us board but it wanted me to verify team name and number. I didn't join a team yet so all I had was, Team 0 and no name.
Thanks
you need to be in the cure coin team to get paid on the pool
from getting started on the pool here https://www.cryptobullionpools.com/gettingstarted
Hi
I have 3 mildly over clocked blades which have been running fine until today when one of them has blown on both blades the ferrite bead marked (what is the "a" for) afb26 next to the usb connector.
Needles to say they don't work any more does anyone have any idea of A/ what the spec is for that component is and B/ The hard one any idea why this may have happened.
The other 2 are hashing fine.
Ken
I have 3 mildly over clocked blades which have been running fine until today when one of them has blown on both blades the ferrite bead marked (what is the "a" for) afb26 next to the usb connector.
Needles to say they don't work any more
does anyone have any idea of A/ what the spec is for that component is and B/ The hard one any idea why this may have happened.The other 2 are hashing fine.
Ken
overheating can cause many components to fail.
the other reason is a short somewhere on the board.
maybe the upper gate mosfet could have died.
check for continuity between pin 4 (gate) and the 4 pins soldered to the same pad (drain).
It's been explained in the 5chips pod thread
https://bitcointalk.org/index.php?topic=519112.msg6722468#msg6722468
on the later blades, gridseed replaced the ferrite beads with zero resistors of the same 1206 size
Well one is back working using one of the fb off of a bad 5 chip and all seems to be fine with it.
Next to bypass the plugs and solder direct to pcb for power and moooreeee heat sinks
)Hi
I have 3 mildly over clocked blades which have been running fine until today when one of them has blown on both blades the ferrite bead marked (what is the "a" for) afb26 next to the usb connector.
Needles to say they don't work any more does anyone have any idea of A/ what the spec is for that component is and B/ The hard one any idea why this may have happened.
The other 2 are hashing fine.
Ken
I have 3 mildly over clocked blades which have been running fine until today when one of them has blown on both blades the ferrite bead marked (what is the "a" for) afb26 next to the usb connector.
Needles to say they don't work any more
does anyone have any idea of A/ what the spec is for that component is and B/ The hard one any idea why this may have happened.The other 2 are hashing fine.
Ken
Its not hard to put them back in and imo worth it to fix issues
As well as the issues mention in the least few posts the two buttons for guided and manual settings where greyed out for me.
I tried doing a clean install and also an upgrade and all the other suggestions none of which worked.
As well as the issues mention in the least few posts the two buttons for guided and manual settings where greyed out for me.
I tried doing a clean install and also an upgrade and all the other suggestions none of which worked.
For people having issues with random errors i have found they flushing the redis db seems to fix them.
Provided you are not using redis for any other apps ssh into your machine and do the following which will rest most of your settings
The prompt will change to redis>
then type
and finally
and restart
Almost forgot you will need to re run the install_miner.sh again to repopulate the db
Provided you are not using redis for any other apps ssh into your machine and do the following which will rest most of your settings
Code:
redis-cli
The prompt will change to redis>
then type
Code:
flushall
and finally
Code:
exit
and restart
Almost forgot you will need to re run the install_miner.sh again to repopulate the db
I have one gridseed 5 chip miner and one gridseed g-blade. Can I run both of these miners off the same raspberry pi running minera?
yes you can
We have two more pools updated in OP and Curecoin is on an exchange also updated in OP
Pools
Mining pool 1: http://cure.cryptopools.com/
Mining pool 2: https://cure.united-miners.com/
Mining pool 3: https://www.minep.it/pool/cur/
Mining pool 4: http://betahash.com/getting_started
Exchanges: https://www.scificryptoexchange.com/#/trade/exchange/41
Pools
Mining pool 1: http://cure.cryptopools.com/
Mining pool 2: https://cure.united-miners.com/
Mining pool 3: https://www.minep.it/pool/cur/
Mining pool 4: http://betahash.com/getting_started
Exchanges: https://www.scificryptoexchange.com/#/trade/exchange/41
I can not see a cure coin pool at betahash.com
United-Miners Cure pool is up and finding blocks
https://cure.united-miners.com/
Direct link to registration page https://cure.united-miners.com/index.php?page=register
We provide all the usual features, but we aspire to be the best through support and lack of downtime.
Stratum with Vardiff
LOW fees, 1% or less!
Email alerts for Down Workers
High-End Dedicated Servers
Gigabit Dual uplink on the EU's best internet backbone
Active IRC community helping new users get started with mining
24/7 Support through IRC (#united-miners on freenode.net), or Contact Form
DDoS Protection
Forced SSL (encryption) for security
Custom User Interface
https://cure.united-miners.com/
Direct link to registration page https://cure.united-miners.com/index.php?page=register
We provide all the usual features, but we aspire to be the best through support and lack of downtime.
Stratum with Vardiff
LOW fees, 1% or less!
Email alerts for Down Workers
High-End Dedicated Servers
Gigabit Dual uplink on the EU's best internet backbone
Active IRC community helping new users get started with mining
24/7 Support through IRC (#united-miners on freenode.net), or Contact Form
DDoS Protection
Forced SSL (encryption) for security
Custom User Interface