Search content
Sort by
Showing 10 of 10 results by lluixi
Buenos días a todos!
Solo quería comentar que finalmente si se llego a formar la envolvente alcista en el diario por lo que en mi opinión coge fuerza las opciones de próxima tendencia alcista y veo un buen momento para aumentar exposición para buscar los objetivos que comenté ayer (primer objetivo: $372/$376 segundo objetivo: $500/$502)
Un saludo y buen Trading!
Solo quería comentar que finalmente si se llego a formar la envolvente alcista en el diario por lo que en mi opinión coge fuerza las opciones de próxima tendencia alcista y veo un buen momento para aumentar exposición para buscar los objetivos que comenté ayer (primer objetivo: $372/$376 segundo objetivo: $500/$502)
Un saludo y buen Trading!
Tu aconsejas mantener o vender? Porque este finde ha bajado un poquitin...se que lo suyo es tener paciencia...
Un saludo!
LLuixi tenias razon son $ lo he editado 
Muchas gracias por tus links y las aclaraciones! Poco a poco el juego de la "bolsa" con BTC's engancha!
Un saludo!
Prohibido poner cohetes hasta alcanzar los 1200.
Mejor dejarlo para los 3000
A este ritmo, para mañana xDD
Id poniéndoos guapos que ya mismo salimos en la tele
Hacia mucho que no entraba por aqui y posteaba algo despues de tanto tiempo riendome con vuestros comentarios chamánicos! sois muuuuy grandes! sacais una sonrisa hasta en el peor de los dias! xDD
gracias por vuestro humor! sois la ostia!!!
Un saludote!!
Hi People.
Can i replace original fans with this one?
http://www.scythe-eu.com/en/products/fans/glidestream-120.html
I want more silence inside my home...xDDD And the Winter is coming...xD Less rpms and noise, more heat inside my home.
I will check the temperatures not going up to 50 degrees or more...
Thanks in advance.
Can i replace original fans with this one?
http://www.scythe-eu.com/en/products/fans/glidestream-120.html
I want more silence inside my home...xDDD And the Winter is coming...xD Less rpms and noise, more heat inside my home.
I will check the temperatures not going up to 50 degrees or more...
Thanks in advance.
El triángulo rompió hacia abajo! Es hora de caer...
http://www.sierrachart.com/image.php?l=1409497780670.png
http://www.sierrachart.com/image.php?l=1409497780670.png
La linea azul de la 5 la tienes dibujada hasta el 260, ¿es el objetivo probable o simplemente la dibujaste hasta ahí?
Es el objetivo de soporte más posible en mi cuenta. No que tiene que ser así, pero entiendo que es lo más probable. Despues de eso debemos llegar a los $100 en caso de que $266 no aguante.
Soy nuevo posteando pero hace un tiempo que os leo. He sacado 1.20 minando este mes. Recomiendas vender o me espero a que caiga y vuelva a subir...si es que sube claro está....xD
Hoy ya he visto que el BTC ha perdido los 500 dólares tal cual dijisteis... xDDD
Las graficas no las entiendo demasiado pero lo que decís y opináis algunos del tema para muchos que no entendemos demasiado es muy bien recibido y poco a poco se aprende mucho de todos vosotros!!
Un saludo a todos y mil gracias por vuestros aportes! Me habéis enganchado a éste foro cosa mala! No hay dia que no os lea...
Feliz Domingo! Hi!
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
My guess is your power supply for your over-clocked machine--can you swap it for a second and monitor to see if it continues to be difficult?Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I tried with a Power Supply ANTEC HCP 1200W and after 3 hours de hash rate downgrade to 385 GH/s from 510 GH/s
I dont understand why.... I think its not power supply. Maybe the temperature? Its operating at 47-43 ºC.... I think is not an excessive temperature...
lliixi you should start low then after a few hours up the frequency to the next until you find where the miner is stable. 212.5 is a good starting point then 218.75 and so on. Many here have been down this road and there is no specific setting for all to follow, what works for one unit may not work on another. You may also look back at the previous pages to see what everybody here has gone through to get a stabilized unit. Trial and error my friend.
I will try but i think that my units only are correct! Not like my Intel 2600K 5Ghz! xDDDDD
Hi!
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I have one Antminer S3 B3 and one is working with 2 PCI Connectors @250Mhz and hashs at 500gh/s but in one hour and a half the hash decreases to 360-380 gh/s. How is it possible? The status of miner appears to be OK, without any "X" or "-"... Somebody knows whats happening? if i reboot the S3 the hashing push up to 500GH/s but in one hour and half decrease too...
In the status no HW errors and nothing strange. Only i can saw is a Little decrease of temperature... 47-44 grades @500GH/s VS 46-40 @365-380 GH/s.
I observed that my miner works more stable with 2 PCIEX connectors tan 4. How is it posible??
And the second question is for the second S3 B3.
I tested 250Mhz, 237Mhz, 225 and default 218.75 but always i get a lot of HW errors. How can fix the HW errors?? The only speed that no cause HW errors is 212Mhz.
I think the temperature is not the problema because its working at 43-43 grades.
Two S3 antiminers are working with the last available firmware of Bitmaintech and are new. Arrived this week.
Can you help me?
PD:I hope you can excuse my English
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I have one Antminer S3 B3 and one is working with 2 PCI Connectors @250Mhz and hashs at 500gh/s but in one hour and a half the hash decreases to 360-380 gh/s. How is it possible? The status of miner appears to be OK, without any "X" or "-"... Somebody knows whats happening?
if i reboot the S3 the hashing push up to 500GH/s but in one hour and half decrease too... In the status no HW errors and nothing strange. Only i can saw is a Little decrease of temperature... 47-44 grades @500GH/s VS 46-40 @365-380 GH/s.
I observed that my miner works more stable with 2 PCIEX connectors tan 4. How is it posible??
And the second question is for the second S3 B3.
I tested 250Mhz, 237Mhz, 225 and default 218.75 but always i get a lot of HW errors. How can fix the HW errors?? The only speed that no cause HW errors is 212Mhz.
I think the temperature is not the problema because its working at 43-43 grades.
Two S3 antiminers are working with the last available firmware of Bitmaintech and are new. Arrived this week.
Can you help me?
PD:I hope you can excuse my English
Anybody?
I tried with a Power Supply ANTEC HCP 1200W and after 3 hours de hash rate downgrade to 385 GH/s from 510 GH/s
I dont understand why.... I think its not power supply. Maybe the temperature? Its operating at 47-43 ºC.... I think is not an excessive temperature...
Hi!
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I have one Antminer S3 B3 and one is working with 2 PCI Connectors @250Mhz and hashs at 500gh/s but in one hour and a half the hash decreases to 360-380 gh/s. How is it possible? The status of miner appears to be OK, without any "X" or "-"... Somebody knows whats happening? if i reboot the S3 the hashing push up to 500GH/s but in one hour and half decrease too...
In the status no HW errors and nothing strange. Only i can saw is a Little decrease of temperature... 47-44 grades @500GH/s VS 46-40 @365-380 GH/s.
I observed that my miner works more stable with 2 PCIEX connectors tan 4. How is it posible??
And the second question is for the second S3 B3.
I tested 250Mhz, 237Mhz, 225 and default 218.75 but always i get a lot of HW errors. How can fix the HW errors?? The only speed that no cause HW errors is 212Mhz.
I think the temperature is not the problema because its working at 43-43 grades.
Two S3 antiminers are working with the last available firmware of Bitmaintech and are new. Arrived this week.
Can you help me?
PD:I hope you can excuse my English
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I have one Antminer S3 B3 and one is working with 2 PCI Connectors @250Mhz and hashs at 500gh/s but in one hour and a half the hash decreases to 360-380 gh/s. How is it possible? The status of miner appears to be OK, without any "X" or "-"... Somebody knows whats happening?
if i reboot the S3 the hashing push up to 500GH/s but in one hour and half decrease too... In the status no HW errors and nothing strange. Only i can saw is a Little decrease of temperature... 47-44 grades @500GH/s VS 46-40 @365-380 GH/s.
I observed that my miner works more stable with 2 PCIEX connectors tan 4. How is it posible??
And the second question is for the second S3 B3.
I tested 250Mhz, 237Mhz, 225 and default 218.75 but always i get a lot of HW errors. How can fix the HW errors?? The only speed that no cause HW errors is 212Mhz.
I think the temperature is not the problema because its working at 43-43 grades.
Two S3 antiminers are working with the last available firmware of Bitmaintech and are new. Arrived this week.
Can you help me?
PD:I hope you can excuse my English
Anybody?
Hi!
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I have one Antminer S3 B3 and one is working with 2 PCI Connectors @250Mhz and hashs at 500gh/s but in one hour and a half the hash decreases to 360-380 gh/s. How is it possible? The status of miner appears to be OK, without any "X" or "-"... Somebody knows whats happening? if i reboot the S3 the hashing push up to 500GH/s but in one hour and half decrease too...
In the status no HW errors and nothing strange. Only i can saw is a Little decrease of temperature... 47-44 grades @500GH/s VS 46-40 @365-380 GH/s.
I observed that my miner works more stable with 2 PCIEX connectors tan 4. How is it posible??
And the second question is for the second S3 B3.
I tested 250Mhz, 237Mhz, 225 and default 218.75 but always i get a lot of HW errors. How can fix the HW errors?? The only speed that no cause HW errors is 212Mhz.
I think the temperature is not the problema because its working at 43-43 grades.
Two S3 antiminers are working with the last available firmware of Bitmaintech and are new. Arrived this week.
Can you help me?
PD:I hope you can excuse my English
Im a new miner from Spain, Barcelona. Best regards for all!
I have two questions. I hope you can help me because i dont have any idea to find the solution of my problems.
I have one Antminer S3 B3 and one is working with 2 PCI Connectors @250Mhz and hashs at 500gh/s but in one hour and a half the hash decreases to 360-380 gh/s. How is it possible? The status of miner appears to be OK, without any "X" or "-"... Somebody knows whats happening?
if i reboot the S3 the hashing push up to 500GH/s but in one hour and half decrease too... In the status no HW errors and nothing strange. Only i can saw is a Little decrease of temperature... 47-44 grades @500GH/s VS 46-40 @365-380 GH/s.
I observed that my miner works more stable with 2 PCIEX connectors tan 4. How is it posible??
And the second question is for the second S3 B3.
I tested 250Mhz, 237Mhz, 225 and default 218.75 but always i get a lot of HW errors. How can fix the HW errors?? The only speed that no cause HW errors is 212Mhz.
I think the temperature is not the problema because its working at 43-43 grades.
Two S3 antiminers are working with the last available firmware of Bitmaintech and are new. Arrived this week.
Can you help me?
PD:I hope you can excuse my English