The new version is finally ready. You can download PhoenixMiner 5.8a from here:

https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Windows.zip
https://phoenixminer.info/downloads/PhoenixMiner_5.8a_Linux.tar.gz


Changes in version 5.8a :

• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8a

Please, can someone tell me what are the minimum amounts that can be withdrawn in coinbene. I tried to remove 24 XRP and it tells me that it is less than the minimum. That is a bad sign because in poloniex I have retired up to 10XPR without problem. In coinbene this information is not listed anywhere

Hi, where do I send the data to change an exchange wallet to a local one.

I made a 266 XLC transfer and my wallet shows a small amount blocked and the transaction log does not show the transfer of 266 XLC. I know they have problems with this, but I also wonder why a coin like coal that was forgotten, does not this happen? In coal I have transferred up to 50,000 without problem.
And before Taro_Naza goes to say something like the answer he gave to another user, insulting him. I tell him that I had not entered for more than a month and I did not know about the problems they had with the transfers. I think nobody cares about that because that's something basic in a crypto coin, but apparently it was not in this

zoin.netabuse.net is the best pool I've seen, since it pays double what jkpool pays, but its administrators don't care if it works or not.
Jkpool must lower the stratum difficulty to make it more profitable.

I seel 10,000 zoin at 1.300 satoshis a few months ago  

Which pool is the best? If you say jk forget it. Jkpool has some bad configuration that makes it difficult to find the shares and that is why the workers are intermittent. When testing zoin.netabuse.net you see how the shares are found every second and the contrast of payment between the two pools is great. I have 15 workers and in zoin.netabuse.net they pay me almost 9 zoin per day and in jkpool they paid me 2.3 zoin for a day with the same workers. The problem with zoin.netabuse.net is that from time to time it stops finding blocks and that is a lot of loss for a few rented vps. 

My wallet stuck in ''failed to parse and validate block'' ''dropping connection''

What happened to the coins that I had at the time of restarting the pool? The pool is working but deleted the wallets and all transactions along with the balance. I have outstanding balance to transfer to my personal wallet

We need more pool, urgently.

I sent you an email with my address because I have not received payment for two days

The only pool is not down but I am mining with a cloud service and since yesterday I had to restart the miner several times, because the pool does not mark anything. I can see the accepted shares in the miner but in the pool there is no active worker. This same happens sometimes with the pool of ocminer and never happens with the other pool of other currencies. When it begins to fail appear in the miner some red lines saying a stratum connection failure. My speed test assures that it is not problem of my side because I have 1ms ping, 387Mbps down and 385Mbps up.

@Claymore suprnova has new stratum host and your miner shows ''Stratum -  Cannot connect to xmr.suprnova.cc port 5222'' in DevFee

@Claymore you could include a parameter that allows 2Gb cards to mine a different coin than exp. As it is now only exp can be mined, using ''-allcoins exp'', but the other ether fork can not be mined because the devfee mine ether and the program is restarted at that time, due to the error that it can not load the dag and this causes that hash is very low. With '' -nofee 1 '' mining ether fork the hash shown in the pool does not exceed 50% of the maximum given by the card.
You could include a parameter that detects the 2Gb cards and assign the dev fee only to mine expanse, this way the program would not be restarted and any ether fork could be mined.

Yes, solution is mine expanse-pascal or expanse with argument ''-allcoins exp'' Ethereum dag is over 2Gb and no fit in your video ram

Has anyone here received payment from decredpool.org recently? I have a payment that already has about 5 hours and nothing that sends to my wallet. The other pools send in less than 5 minutes and charge less fee. Suprnova = 0,02dcr withdrawl fee and sends to wallet quickly and decredpool.org = 0,1dcr withdrawl fee and takes forever.
0% = Cheap goes expensive

No, the unit of measure to receive interest is the day. A block can not be the unit of measure, because that was never mentioned at first.

How much time to mine one block? It depends how much gpu you own and How many coins is in my account until I mine one block? 0 (Zero) because you no have account until you mine one block.

Here there is a great problem with the pools. I have mined xmr and it pays to me a day what the calculators mark. I mining bipcoin I have left it several times because I do not see that the payments are consistent with the calculators, almost always it is the half. For example today, that it started paying well and then that the difficulty raised, it stops doing. With my speed, it has to pay me 1.25 Bip per hour at this moment but there is a payment that was late almost 8 hours and was 5.2 Bip

19:26:49:372   1424   
19:26:49:372   1424   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:26:49:372   1424   º            Claymore CryptoNote CPU Miner  v3.5 Beta            º
19:26:49:372   1424   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:26:49:582   1424   Wrong wallet address bip1kx8jyqtXpn9feET8mK1cHgcoCR4GNgRiov9WkHC9YA6NPki4KCSgF8xJjNrxwNcFyHdoVpeGYLR MggYjRZLC9ZZeFaADKx - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
19:26:49:582   1424   Pool 5.189.135.137 removed from the list
19:26:49:582   1424   No pools specified! Specify at least one pool in "pools.txt" file or in "-o" parameter.