trying it doesnt seem to work . Looks like it restarts every 5-10 min


you 're right . Its a t3 50t i got 5 machines . Some of em run fine in factory mode. Some of them have this problem and run in efficiency mode only or in balanced mode. I just dont get why . At start they was running just fine on all modes

https://ibb.co/gRMdChj
https://ibb.co/S79mngF

I get this with no reason while in factory settings.
In balanced mode it seems to work without stoping.
Any ideas?  

As guest you can not change anything just observe ....
Thats how i saw someone else has set up his account

Long story short , i realized ,soon enough , my miners didnt mine anymore just by checking f2pool.
I try login to my miners , nothing . I realize i got hacked.
I try reset them by pushing the button they got for 10 / 15/ 30 secs nothing. By searching the internet i found there is a guest account with pass guest.
As guest you cant change anything just observe.
I try it , it logs . I see account 4sm4 mining on viabtc ....

So what can i do ? My thoughts so far , either i am not doing a correct factory reset or the factory settings are modified as well .

Thanks in advance guys

And how could you cool novec ? Could you use a fish tank pump with it like i did with miral oil ?

Hi all

it was the temperature after all . Once the room temp reaches a specific point it stops hashing and reboots as a safety fail over.
Took me a while to figure as innosilicon doesnt mention it somewhere.

As for the voltage/freq i dont have access to them with innosilicon.

Its already on balanced .... 
How can pool be responsible when the other 2 machines are farming on f2pool just fine ?!

Hi all ,

any idea why am i getting this :

https://ibb.co/ZSGC39Q
https://ibb.co/F31KqmZ

As you see miners stop mining for a reason i dont get  . I got 2 more , f2pool as well . They farm fine. Same temperatures +-

Thanks in advance !

Thanks a lot guys. I bought this from ebay and atm waiting to see if thats what went wrong. I can access the web interface menu when powering up so fingers crossed.

https://www.ebay.com/itm/12X-Fan-Simulator-Emulator-Spoofer-Fan-Delete-All-miners-with-PWM-fans/303299288752

By the way for those who asked i used pharmaceutical/cosmetic grade light paraffin oil which belongs to mineral oils (actually its the purest , clearest mineral oil i had access to )
It has 2 point something conductivity index while water has 80+ , its cheap and you dont buy something worth 4€/lt for more just by naming it "special ultra super mining oil"

Used a 9x12cm fan radiator (up to 18fans total if u put 9 more one the other side) and a fish tank pump . Will it work ? I dont know , waiting those fan spoofers to try .

I saw guys doing it with just a 3 fan radiator on youtube , but then again their miners were not 3100+ kw .

Yes i can . But it shows the initial "syncing" screen of innosilicon . I can navigate through the tabs as far as i remember .

Is there any chance i could access it by ssh and bypass the fans from there?

Can't be heat because the miner didn't had tha chance to sync and start mining.
I used paraffin oil pharmaceutical / cosmetic grade.
Fans were and are working even now if I power it up as does the entire machine. It does power up and just won't sync or do anything other than staying idle
I ll try upload a video in an hour or two.

---

Here is the video

https://youtu.be/cMz9V0C5Yik

By watching it over and over again I noticed the bubbles coming from the center of the fan. I also noticed that just one seems to be working. So can it be that the fans burned due to the liquid resistance?

Hi, it doesn't have to do with heat, cause the miner was broken in under one minute since powering it in oil. The oil was still cold.


I didn't get to the point I had to cool the oil. It all happen in 30 seconds. Funny thing is the miner was still on, though never connected to mine.
For the record I had a radiator with 9 fans on it but the oil was still cold.

Hi ,
i immersed my T3 50T in mineral oil and it didnt work . I had about 7 days an A9 , borrowed from a friend and everything worked fine in oil . So after that passing the test i used the same oil on my T3.

I split the main unit from the psu (it comes as one unit ) and immersed the unit in oil , same as i did with the A9 . 30 seconds after powering it up smoke came out , 15 secs later again the same and then there were small bubbles with smoke coming out  out of the fans, poping once they came to surface so i powered it off.

Any ideas about what went wrong  ?

Video https://youtu.be/cMz9V0C5Yik

link of the miner :
https://www.innosilicon.com/html/t3-50t-miner/index.html

Thanks in advance

2700 το ενα

Πουλάω 5 ολοκαίνουρια INNOSILICON T3-50T . Με το κουτί τους , μίας ημέρας στη κατοχή μου . Δεκτός κάθε έλεγχος !

Καλησπερα , εχω 5 μηχανακια ινοσιλικον τ3 τ50 σε ενδιαφερουν ? Στα κουτια τους στη κατοχη μου 1 μερα , καινουρια.  Ανοιξα να δω τι παιζει και καταλαβα οτι δεν ειναι για μενα το αθλημα.

Καλησπερα , εχω 5 μηχανακια ινοσιλικον τ3 τ50 σε ενδιαφερουν ? Στα κουτια τους στη κατοχη μου 1 μερα , καινουρια.  Ανοιξα να δω τι παιζει και καταλαβα οτι δεν ειναι για μενα το αθλημα.