The  new  version  is  finally  ready.  You  can  download  PhoenixMiner  5.8b  from  here:

PhoenixMiner_5.8b_Windows.zip Github
PhoenixMiner_5.8b_Linux.tar.gz Github


Changes in version 5.8b :

• Full LHR disable mode -lhrdis <n>  1 - yes (default), 0 - no
• Added lock core clock
• Fixed an issue causing crashing with some RTX 3060/3080/3090 cards
• Implemented new "turbo" kernels (-clkernel 3) for AMD Polaris cards that can work with the current DAG sizes over 4 GB. Note that -clkernel 3 uses double the VRAM and will
  provide slightly faster hashrate with slightly higher power consumption. You can use the -rvram command-line parameter to specify how much VRAM to be left unused
• Increased the maximum supported DAG epoch to 600 (i.e. until about Sep 2023)
• Implemented full hardware control for AMD RX6900/6800/6700 cards under Linux. Note that with these cards under Linux you need to specify relative core voltage: e.g. -
  cclock -50 will set the core voltage to be 50 mV under the default value
• Added ROCr kernels for Vega, Radeon VII and Navi cards. With these kernels you will be able to run these cards with Linux drivers 20.45 and later but the performance will
  be lower than with the older PAL drivers and kernels. We recommend using AMD Linux driver 20.30 for all cards except RX6900/6800/6700
• Fixed an issue causing crashing with some RX6900/6800/6700 cards under Linux (there is no need to run these cards with -clkernel 0 anymore)
• Added support for AMD Windows drivers up to 21.8.1. Note that Radeon VII cards will not work with drivers 21.6.1 or higher - you need to use older drivers for proper
  operation of these cards
• Added support for AMD Linux drivers up to 21.20 (use older drivers for Vega or Radeon VII cards as they will not work with 21.20). Note that the latest 21.30 drivers are
  not supported (and the initial testing shows that even the older Polars cards are not working properly with them, so avoid 21.30 for now)
• Numerous other fixes and small improvements

Please let us know if you have any problems or questions related to PhoenixMiner 5.8b

50% of the trade log (in appendix 2), containts positions which require shorting on bitstamp.
However you cant short on bitstamp, so how would you do this?
Because otherwise half of your appendix 2 is false information.

the whitepaper discussing their trades: https://www.rialto.ai/wp-content/uploads/2017/06/RIALTO.AI_Whitepaper.pdf \
appendix 2: https://www.rialto.ai/wp-content/uploads/2017/06/Appendix2.pdf

I will check i got my block explorer almost ready

Hello designers,

First of all Keccak, Mumbly and me want to thank you for all great logo's you guys have submitted of these last weeks.

A few days ago, we have talked and have chosen the very few best of the logo's submitted.
The designers of those logo's have been contacted that their logo's have been chosen.

During the next week or so we will help those designers to perfect their logo's.
Because altough they were the best, they still had some minor cons.
But we will try to perfect their designs, during this period.

So if you havent been contacted you can assume your logo hasnt been chosen.
It is however possible during this final process to join those very few.
Because we will still comment on your logo's that you might still want to submit.
We are still open for anything, but we are trying to finish this contest.

If you have questions or comments feel free to send us a PM.

Greetings,
 
M & LT

Currently waiting for a more known exchange.
Also IPO'ers shouldnt dump their coins just yet, since the price is so low.

Not to be rude, but the thread has been here for 24days.
And to answer your question Heavycoin  with 172 BTC within 18 days of thread started.

Do i get a price now? lol

I am sorry to announce that your submission has been revoked due too fraud.
Also your account will be banned from this competition.

For anyone else who is thinking about submitting someones else design.
I warn you, there is a chance you will get away with it.
But if you don't all your previous designs will go down the drain as well.

LT

Another logo

Switching my power to this coin, lets see what it will bring

Quick summary for people that dont want to read back.

Dev said he would launch at 11 PST he launched a couple hours earlyer.
Dev said he would do a 2% premine he did a 4%.
Dev said didnt say he would mine the first 5000 blocks himself ontop of the 4%.
Dev also didnt say that he would dump couple 100mil on the exchange 2 hours before early launch.

How do i know?
Block explorer clearly showed me when was mined and at what difficulty.
If your using KGW for difficulty and your difficulty stays at 0.0001 and 5000 blocks get mined
before the release, you know something isnt right.
And if you then find the wallet that mines them, you will know for sure that the dev is a greedy fuck.

Dev have a great day, i would have loved to mine your coin if it was a fair one.
But since it wasn't I used this great day to expose you for what you are.

A Fraud

For anyone who can enjoy it,

il leave my block explorer below.
Note that it will be slow and unfinished.

just uploading it so everyone can see.
Enjoy

http://fairsquare.info:2750/

P.S. the value out is the amount. but note that you have to move the "." 2 places to the right.
Since it is still in satoschi format.

so 6000.23 is actually 600023

just to make clear how much me made.
he premined 2 bil more than the original number so 4% instead of 2%
also the wallet was released to people at block number 5000.
now allot their were a few different wallets in that number of 5000 but just 2 were standing out wich had like a couple 1000 blocks, so he prob mined over a few different wallets. but that doesnt change te fact that you see that the difficulty is not changing during the first 5000 blocks. wich means that only one person or a few were mining.

so now this guy has 4 bil(4%) of the total amount of coins in the first block

and then another  5000 +/(- 1000) blocks with and average of 500k
so another 2.5 bil from early premine.

so 6.5 bil
instead of the 2bil he said he would mine.
now if he would sell lets say 4.5 bill because we shouldnt have know about that part.
now if he would be able to sell all of the at the price of 0.00000001
than he would make a nice round number of 45 bitcoins.

now if you wouldnt get out of bed for that, than you dont belong on this site.

EDIT: there has been 150mil sold already (average 300 blocks)making between 1.5 and 3 btc in the first 5 hours of this coin.

There would have been more anymo if the dev wouldnt have burnied the price so low by putting the coins up for sell before the wallet was released

EDIT 2: i could release my personal block explorer temporarly to just let you see for yourself what kind of fraud this dev is.

RQWW9X3ZXpJsjr2T7Q3eh6xKnnF9QsGvYV (blocks premine account) 1227 transactions
RPqRpyXiCDqB5krZNjsNqaBtvnybTcr3qz (store account, i think about 12 billion)

so before release the blocks where at 4.9k
Verry intresting

also premine was 4% not 2

sorry my bad 4.5k blocks.
At least thats what the timeline says, and what is correct too when the pools started mining and getting their first blocks. since everyone was at mining4all first.

adding a screenshot soon

the dev premined another extra 500 blocks from yesterday night till now.

I find this very intresting i have setup a block explorer for myself(ABE).

And i can see one account, first taking the premine 2 days ago,
then another account yesterday mining for about 500 blocks.

So ontop of the original amount of premine another 500 blocks, thats nice

The problem isnt the people not unstanding, the problem was your webcountdown, wich is probably based on computer settings of the users.

So for me it has already been 23.00 but for you it hasnt,  so you didnt see the problem yourself.
I would suggest to create a new countdown on a different site that is based on a time standard and not on computer time.

i think we made it clear in the first post we dont approve flaming

great good looking design, tip tho next time you make a small change like just only the teeth, put them in the same post.
dont create a new post for it, mumbly will review all posts in seconds, so creating a new post is just coming to spamming logo's
something we are trying to prevent.