Search content
Sort by
Showing 20 of 34 results by magnoman
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
How do i use genoil eth miner its not in the remote dashboard or under clients on my pc
It is missing from remote but probably since its not fully functional yet - I think there are some problems during switching between that miner and others. For now you have to either manually edit the config file with:
MINER = genoil-eth
OR
Select genoil-eth at the very bottom of the client drop down list when using the settings button on the v3 (003) early release node. That settings app just edits the config file on the node for you and then restarts the node when you save.
Also be aware that the dashboard isn't calculating profit yet for genoil - only hash rate.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Yeah page is down...as I was trying to set up dual mining...
An ETA would be nice
An ETA would be nice
It's the middle of the night where Coinscrow is. Might be a few hours unless he's awake.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Couple quick questions. Is it possible to point the app/software at just a normal PC or is it just ASIC's and purpose-built rigs?
If the answer to the first question is yes, then can a person with perhaps a bunch of USB miners, not these days lol, all running connected to a single PC to have that data "pooled" treating the PC as a single mining unit
At this time the Minerstat application only supports Windows and Linux GPU mining rigs. (Thus far no ASIC and no USB miners support but yes you can use a normal PC with a single or more GPU)
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Ok I am still having issues... I have tried the auto-update inside the MS folder and after it is done it starts the page white page with the circle status in the bottom right but doesnt actually open a miner?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
Similar thing happened to me few weeks back and I found I was incorrectly using all caps for the miner type in the config file. Has to be lowercase and make sure there's no typos. Just one character off and it won't open anything. Check README in MS install directory for exact guidance.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
yep all my config files were toast. I tried to update my config files on the site and now the site is down?
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
@Bones972 -Make sure you check the config.txt file in the Minerstat directory on your rigs. That's the file that has your access key, worker name, and specifies which miner to start when the node starts. Those files were getting set back to default during the updates at one point.
You might look into Chrome Remote Desktop or using the VNC feature so you can access your miners remotely. It's been very handy for me at times. I can even access miners desktop from my phone.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
So I just got back from vacation. The attack happened on the first day I was gone.
I can not get any of my miners to show up on the site. I have gone back over the past few pages and downloaded 2.9.1 and changed it all over on there but still can not get the site to show my workers.
Anyone have any suggestions on how to get them back up and running?
I can not get any of my miners to show up on the site. I have gone back over the past few pages and downloaded 2.9.1 and changed it all over on there but still can not get the site to show my workers.
Anyone have any suggestions on how to get them back up and running?
Did you check your config.txt files to make sure they didn't go back to default?
What happens when you start the nodes?
Blaaaaaaaah this motherboard
Now I can't even get past the Bios screen, doesn't even let me enter win10 with 0 GPU's installed.
?? Anyone
Now I can't even get past the Bios screen, doesn't even let me enter win10 with 0 GPU's installed.
?? Anyone
Mine was finicky until I manually set the RAM speed to 2133. Also if you use a single stick make sure it's in the 2nd slot from the CPU.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Talk to the guys at cloudflare.com there paid solutions are pretty good.
Also a side note, the miner should connect to a remote SQL database for submitting, getting their data. This server should only allow X number of connections from 1 IP every minute so If I am paying to use 10 rigs I should be able to send 20 requests per minute before the IP being blocked as it takes 1 request to get the launch perimeters to the program and then It should send a packet out every Minute. I also have said 20 to allow some head room for rig tweaking (which should be done before the web configurations are ever set but we have to account for noobs). This would also help to prevent people from running multiple rigs under one Worker name.
Also a side note, the miner should connect to a remote SQL database for submitting, getting their data. This server should only allow X number of connections from 1 IP every minute so If I am paying to use 10 rigs I should be able to send 20 requests per minute before the IP being blocked as it takes 1 request to get the launch perimeters to the program and then It should send a packet out every Minute. I also have said 20 to allow some head room for rig tweaking (which should be done before the web configurations are ever set but we have to account for noobs). This would also help to prevent people from running multiple rigs under one Worker name.
I turned off apache right now.
I'm working an a possible permanent fix.
The website comes back in a few hours..
No big deal at all coinscrow. Miners are still mining.
Thanks for keeping us informed.
Hey there guys,
I've been looking for 480s/580s for a couple hours now and I'm striking out. I found some 1080s but those are fricken pricey beasts.
Man, I was looking to go balls to the wall and build 4 rigs but finding 24 gpus right now is gonna take a miracle it seems?
Anyone have a spot online or offline (Bay Area) that I could swoop some cards to build my second Ether rig?
Thanks ahead of time!
AK
I've been looking for 480s/580s for a couple hours now and I'm striking out. I found some 1080s but those are fricken pricey beasts.
Man, I was looking to go balls to the wall and build 4 rigs but finding 24 gpus right now is gonna take a miracle it seems?
Anyone have a spot online or offline (Bay Area) that I could swoop some cards to build my second Ether rig?
Thanks ahead of time!
AK
Limited stock here:
http://www.dell.com/en-us/shop/accessories/apd/a9679689?c=us&l=en&s=dhs&cs=19&sku=A9679689
Link through ebates or befrugal for 8 or 10% back. Sign up for Dell advantage for free expedited shipping and more cash back.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Maybe it can be made so it doesn't have to close and open clamore-eth miner every time when pool changes from one ethash coin to another and only open a new miner if the algo is different eg. Ethash coin to Equihash coin.
Claymore would need to rebuild/load the DAG database anyway when switching from one Ethash coin to another Ethash coin. That is the most time consuming part of the Eth miner startup. Already Claymore is pretty fast compared to others. One thing that might work is if the Claymore miner could be paused. NiceHash does this with their Ethash miner so it doesn't have to rebuild DAG if it goes from Ethash to other coin and back to Ethash.
If you could pause Claymore then you could run two instances pause and switch between them and also start other miner if better profit. That would probably use a lot of RAM/virtual mem though and require Claymore to make some changes to his miner to support it. Might overly complicate the way the node runs and monitors.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
i contacted the support with the old server the new server is working great.
C:/Windows/System32/drivers/etc/
edit hosts file
PUT
thats fix the problem or the time will fix it later today..
C:/Windows/System32/drivers/etc/
edit hosts file
PUT
Code:
104.28.31.251 minerstat.com
thats fix the problem or the time will fix it later today..
At work I can hit the site just fine but at home it still doesn't resolve to an IP. DNS changes can take a few hours to go through everywhere so just have to be patient.
At least the miners are still mining.
**Just don't reboot rigs or restart node until you can hit the website from one of your rigs.**. - Or be prepared to edit hosts file.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
the website is up and running. maybe some dns error. i check it and fix asap i can.
please write here, what you see to help detect the problem
please write here, what you see to help detect the problem
Can't get to minerstat.com from US. Looks like a DNS problem - no resolution.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners.
Can you give more specifics?
- Which miner(s) are exhibiting this behavior?
- How much is the hash rate dropping?
- What GPU(s) and CPU do you have?
- Are you CPU mining as well?
- Windows version?
If we can replicate the issue then perhaps we can help find a cause and solution.
Eth only miner I get 30-31 mh/s and once it starts syncing my gpu 2 drops to 28 mh/s then when it's done syncing goes back up to 30-31. Running 6 gpus.
Rx 580s 8gbs CPU intel 3900 I think? The one that works with z170a
Not CPU mining
4gb ram
Windows 10 64 bit
Are you running a monitor on the rig? If so, is it plugged into the 2nd GPU or are you using the onboard graphics? (On board graphics might be worth a try - that should take a little bit of load off the GPU)
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Coinscrow, do you know why when node is fetching data and syncing there is drop in hash rate?
I haven't noticed any appreciable difference in the hash rate while the Minerstat is syncing on my rigs. I've used most all of the miners.
Can you give more specifics?
- Which miner(s) are exhibiting this behavior?
- How much is the hash rate dropping?
- What GPU(s) and CPU do you have?
- Are you CPU mining as well?
- Windows version?
If we can replicate the issue then perhaps we can help find a cause and solution.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Can anyone confirm if this is a correct setting for the new ZenCash on EWBF Miner?
miner.exe --server zen.suprnova.cc --user Bones972.Athena --pass x --port 3618 --cuda_devices 0 1 2
miner.exe --server zen.suprnova.cc --user Bones972.Athena --pass x --port 3618 --cuda_devices 0 1 2
That might work or try this one...
%~dp0miner --server zen.suprnova.cc --port 3618 --user username.worker --pass x --api --log 2 --eexit 3
(add --api and --exit 3 to enable Minerstat monitoring and Watchdog.)
Your --cuda_devices should only be needed if you want to exclude one or more of your cards otherwise it should detect and use all cuda devices by default.
Got a few hours to go yet of course.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN]
How would work with the RX 580s?
Wattol currently doesn't support these I believe. Could we just use after burner? and disable use of wattool?
Wattol currently doesn't support these I believe. Could we just use after burner? and disable use of wattool?
Yeah you don't have to use watt tool. I use afterburner no problems.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
This was my first attempt to use this.
Trying to use ETH+DCR.
Pasted in the cmd I use locally in the online settings.
I do not believe it started to mine at all.
Trying to use ETH+DCR.
Pasted in the cmd I use locally in the online settings.
I do not believe it started to mine at all.
Did you edit the local config file in the MS_Node directory?
It will need the following in order to start claymore dual miner by default. (you can manually switch miners in the dashboard after you start the node if you have others configured)
ACCESSKEY = MYKEY
WORKER = MYWORKER
REMOTE = YES
MINER = claymore-eth
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
Trying to use this tool but it refuses to start. it keeps telling me to enable the Remote Web Server but it is running. I click the link in the port area and it shows it in a browser. I forwarded the port to the correct PC.
Not sure what else this thing wants. It says HardwareMonitor log file does not exist.
Anyone else have this issue?
Not sure what else this thing wants. It says HardwareMonitor log file does not exist.
Anyone else have this issue?
That happened to me a few times earlier this evening as well and just now. I had switched to EWBF miner and Minerstat gave a bunch of errors as you describe. I stopped and restarted and they eventually cleared up. (this is not typical) Which miner were you trying to use? Did the miner start mining or not even start at all? For me EWBF continued to run just fine in the background just the Minerstat node stopped sending updates to the dashboard.
BTW: You don't need to forward any ports. The web server and mport is simply used to bridge between the node software and the miner software for status and updates. Nothing to do with internet.
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
---------------------------------------------------------------------------
Website & APP Improvements:
- New coins for CCMINER: VTC, DGB, MONA, GRS
- Ewbf & CCMINER now display pool name.
- Ewbf-ZEC support: ZEC, ZCL, ZEN, ZDASH.
- The website prepared for ZENCASH. (ewbf, claymore miners)
- Some UI improvements.
- Packaged Server Code -> Faster load
Website & APP Improvements:
- New coins for CCMINER: VTC, DGB, MONA, GRS
- Ewbf & CCMINER now display pool name.
- Ewbf-ZEC support: ZEC, ZCL, ZEN, ZDASH.
- The website prepared for ZENCASH. (ewbf, claymore miners)
- Some UI improvements.
- Packaged Server Code -> Faster load
Perhaps I am completely blind but where do I add hashrates / pools / wallets for these coins?
Also add Siacoin as solomining option, it is really profitable atm!
Jamievs,
For NVIDIA (or non-algo switch) you have to edit the configs for each worker in the config editor under settings on the Minerstat site.
For instance if you'd like to mine siacoin with NVIDIA then you'd edit the CCMINER-TPRUVOT config.
I'm currently mining Sia but its not fully supported with Minerstat yet. (stats are missing) Coinscrow says he will look at this a little later.
In the mean time can use this config if you'd like to mine Sia with NVIDIA:
ccminer-80-x64 -a sia -o http://sia-us-east1.nanopool.org:9980 -u coinwalletaddress.worker -i 28 -b 0.0.0.0:3333 --api-bind 3333 --api-remote
Note: I was not able to get this working using stratum+tcp protocol with any of the pool I tried but HTTP/Getwork works fine. (this may be a ccminer problem) Also be sure to add -i 28 for best performance it defaults to 26 and is slower without.
SGMiner may be a Sia option for AMD. I'm not certain.
Great it is mining now trough the portal, thanks! The dashboard has no clue how to calculate profit though, which is kinda strange because it does calculate it properly when it is used for the dual coin mining.
Edit: anyone knows what works for AMD?
This guide on siamining pool has some other miner choices for NVIDIA and AMD.
https://siamining.com/help
If sgminer doesn't work for AMD may need to have coinscrow add a new miner. (Maybe Marlin?) That's probably a lot of work though. (new API etc)
Re: 🔥🔥🔥🔥 All-in-1 Rig Tool 🔥🔥🔥 [REMOTE][WATTTOOL][PROFIT SWITCH][WIN][IOS/ANDROID]
---------------------------------------------------------------------------
Website & APP Improvements:
- New coins for CCMINER: VTC, DGB, MONA, GRS
- Ewbf & CCMINER now display pool name.
- Ewbf-ZEC support: ZEC, ZCL, ZEN, ZDASH.
- The website prepared for ZENCASH. (ewbf, claymore miners)
- Some UI improvements.
- Packaged Server Code -> Faster load
Website & APP Improvements:
- New coins for CCMINER: VTC, DGB, MONA, GRS
- Ewbf & CCMINER now display pool name.
- Ewbf-ZEC support: ZEC, ZCL, ZEN, ZDASH.
- The website prepared for ZENCASH. (ewbf, claymore miners)
- Some UI improvements.
- Packaged Server Code -> Faster load
Perhaps I am completely blind but where do I add hashrates / pools / wallets for these coins?
Also add Siacoin as solomining option, it is really profitable atm!
Jamievs,
For NVIDIA (or non-algo switch) you have to edit the configs for each worker in the config editor under settings on the Minerstat site.
For instance if you'd like to mine siacoin with NVIDIA then you'd edit the CCMINER-TPRUVOT config.
I'm currently mining Sia but its not fully supported with Minerstat yet. (stats are missing) Coinscrow says he will look at this a little later.
In the mean time can use this config if you'd like to mine Sia with NVIDIA:
ccminer-80-x64 -a sia -o http://sia-us-east1.nanopool.org:9980 -u coinwalletaddress.worker -i 28 -b 0.0.0.0:3333 --api-bind 3333 --api-remote
Note: I was not able to get this working using stratum+tcp protocol with any of the pool I tried but HTTP/Getwork works fine. (this may be a ccminer problem) Also be sure to add -i 28 for best performance it defaults to 26 and is slower without.
SGMiner may be a Sia option for AMD. I'm not certain.