Please could I have some help...

The mining software (usually some Claymore miner) takes forever to connect, sometimes well over 30 min.
I have set serialisation to max to help stagger the startup processes but its still not connecting to any pool.

Running 6 AMD Card on Windows 10 with the latest AMD drivers (set to compute mode).

  well thats annoying!
should have kept an eye on the change log... although i guess -pow7 1 should now be set to default by Claymore IMO

Thank you... If I was running the miner without -pow7 1 for several hours, does that mean my shares were not doing anything? 

Hi,

I thought I would give Awesome Miner a try after seeing a number of positive reviews.

Are there any good / up to date sites showing step by step how to configure the software for Multi Profit mining on MiningPoolHub?

Thanks

Guessing you have tried to flash the BIOS with the one you use to get 30MHs?
Did you make a note of the serial number of the one you sold?... maybe the buyer returned the same model but different/faulty card.

Any ideas?
Also does Phoenix support SSL pools?

Thanks

Could I have some basic help please...

The line below gives me semaphore timeout errors:
PhoenixMiner.exe -pool europe.ethash-hub.miningpoolhub.com:20585 -wal username.worker -pass x -proto 1

What can I do to fix the errors

Could somone help me work out why a GPU starts with 0 Sol?
Then I see OpenCL GPU Hang errors.

GPU is ASUS Dual RX580 8GB
Stock BIOS and with Ubermix 3.2 mem strap both lock up

For testing the GPU is running off its own 750w PSU, so I don't think its power.

Changed PCI riser for a new one

Card is only 2 months old, could it be faulty?

Same here...
@claymore can you help?

My setup
ASUS B250 Mining
8GB RAM
G4400 CPU
128GB SSD
4x RX580
2x RX480
3x 750w PSU

Mining ETH is very stable 29-31MH/s accross the cards.
Switching to ZCL gives immediate OpenCL errors GPU 1 & 4 don't even start up before the miner resets.

Tried -old and -i 1 switches but that didnt help

Hi,

Could someone help with troubleshooting my issue.

I can mine ETH only at 30-31MHs without any issues.

If I add a DCR to my miner file, I start to get openCL errors.
I have tried to lower the intensity but errors still appear, what could be causing this?

Miner: Claymore v10.2
Miner Batch:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xWALLET.WORKER -epsw x -dpool stratum+tcp://dcr.pool.mn:4801 -dwal USER.WORKER -dpsw x -dcri 10

System:
Windows 10 Fall Creators
Latest AMD Driver (17.12.1)
4x RX580 8GB
2x RX480 8GB
2x 750w PSU
ASUS B250 Mining Motherboard
8GB RAM
Intel G4400 CPU
128GB SSD
6x PCI Risers v007

GPUs are BIOS modded
I use OverdriveNTool / GPU Profiles to ensure the clocks and voltage are all the same.

Thanks in advance

Thanks @claymore

Looks stable and no issues to report yet.

(AMD 16.10.2 - RX480 - 8GB - approx 40S/s per cards)

Just got to work on the power draw now... although temps are good, 60c / 25% fans

Could I have some help pleaseeee...

Rig overview:
Win 10 Pro
AMD 16.10.2
XFX RX 480 8GB

Issue:
When running older AMD drivers, I am able to load custom ROMs (using the driver sig method).
After updating to 16.10.2 the drivers are showing a warning in Device Manager... therefore Claymore will not mine.

Troubleshooting carried out:
Reset WattMan
Flashed back to Stock ROM
Uninstalled GPUs in Device Manager
Ran AMD Removal Tool
Installed 16.10.2 < GPUs working on Stock ROM at this point.
Flash custom BIOS (Boysie Low Pwr 29Mhs) < Was working on older driver without issues

Am I missing something, why cant the custom ROM load with the newest driver?

Thank you for the valuable information... I will take a look into a hosted space in a data centre but I think it could still be more than the monthly return.

Thank you... there goes another of my money making plans.

-£170 per month at the current exchange rate!
https://btcserv.net/bitcoin-mining-calculator?hashrate=4.5&hashrate_unit=tera¤cy=GBP&difficulty=113354299801&block_value=25.00&btc_rate=280&watt=1300&kwh_cost=0.30&kwh_currency=GBP&hardware_cost=700&hardware_currency=GBP&pps=0.000000000088

Hi All,

I am stuck trying to work out some costing, the power rating of an S7 is around 1300W but how much is that in kWh - is it 1300*24?
Energy in the UK is expensive and I highly doubt I would make a profit with this costs below:

Electricity -
Unit rate:
12p ($0.17) per kWh

Standing charge:
26p ($0.37) per day

VAT:
20%

Miner -
S7 power consumption:
1300W

Hardware Cost:
£700 ($1000)

If someone could help clear up my query about the kWh, that would be great

Thanks

Nice to see the UK Gov are being urged into adopting crypto-currency.

http://www.bbc.co.uk/news/technology-35344843

Link to report:
https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/492972/gs-16-1-distributed-ledger-technology.pdf

I can't help but feel that Mike's article was purely to scaremonger the market into selling up and for him to make a large profit.
It's good to see a decent reply from Ron and hopefully we start to see a rise in the value of BTC today.

I have just got into mining and only connected up my ASCI miner on Saturday, as Mike announced his departure and degraded the future of the Bitcoin!
I am make a loss at the moment on energy consumption and need to decided if I should keep it running.

My 2TH/s miner has earned 0.014 BTC ($5.30) yet has cost $7.20 in electricity

An interesting read: https://medium.com/@octskyward/the-resolution-of-the-bitcoin-experiment-dabb30201f7#.7jjpdz42d

I'm just waiting for the S4 to be delivered but I have seen enough setup guides online to know what you mean.

Which Pools would you recommend?
I have registed with Slush, Antpool and Ghash so far.

Are there any useful tweaks for the S4 - e.g. fan speed / clock speed settings?
I noticed a few custom firmware's appear when searching online but worry that they may overload the system.