Search content
Sort by

Showing 20 of 693 results by micax1
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.8.3 - Ethash/Kawpow/Etchash/Autolykos2 and More
by
micax1
on 07/08/2021, 06:44:36 UTC
Hi,
I have some issues when using for xhv coin under linux ( RaveOS) comparing with windows.
Under linux my baffin cards like RX 550 2Gb, RX 560 2Gb works only 300 h/s. But it will get 500 h/s more in windows, with same core, mem, and voltage.
Let me know the problem and how to solve it.
Thank you.

Do you use auto-tune?
Check your auto-tune settings that miner finds. are they same?
if they are not post it here - so we can compare.
Post
Topic
Board Announcements (Altcoins)
Re: [ANN] [POW] [XHV] Haven Protocol - untraceable payments x stable value storage
by
micax1
on 24/07/2020, 05:17:12 UTC
anyone knows node that sync > 640641? tried OPs to run full node and it stuck on 640641 seems like fork one.
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.5.6 - Cryptonight Thread - High hashrate, Low Power
by
micax1
on 05/08/2019, 18:41:52 UTC
We have a special initialization procedure compared to other miners which is more sensitive to configured clocks etc. For pushed mem clocks, we sometimes get these retries before succeeding. You want those clocks for your mining though, so we had to add logic for handling failed inits with automatic retries. If mining is working fine after that, you're all good, although I know it might look a little weird with these error messages and retries.

Maybe I'm misinterpreting things though - are you saying it takes 2-3-4 attempts to get a "successful" start like the above, and you have to restart a nr of times manually to get there? Or, is it starting 100% of the time in the end, but with the errors and retry attempts in the logs above?


Well I wish it were every time like that... sometimes it never gets there.. and i have to restart..
but if you say that`s because of overclock - i can try to lower it a bit...
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.5.6 - Cryptonight Thread - High hashrate, Low Power
by
micax1
on 03/08/2019, 11:10:00 UTC
that`s my typical init:

Code:
Miner:   teamredminer
Version: 0.5.6

          Team Red Miner version 0.5.6
[2019-08-03 14:01:50] Auto-detected AMD OpenCL platform 0
[2019-08-03 14:01:51] Initializing GPU 0.
[2019-08-03 14:01:52] Initializing GPU 1.
[2019-08-03 14:01:53] Initializing GPU 2.
[2019-08-03 14:01:54] Initializing GPU 3.
[2019-08-03 14:01:55] Initializing GPU 4.
[2019-08-03 14:01:55] Initializing GPU 5.
[2019-08-03 14:01:56] Initializing GPU 6.
[2019-08-03 14:01:57] Initializing GPU 7.
[2019-08-03 14:01:58] Initializing GPU 8.
[2019-08-03 14:01:59] Initializing GPU 9.
[2019-08-03 14:02:04] Comm buf exit code timeout (fffffffe/8279/-1320809326/-1320809326/00000000).
[2019-08-03 14:02:04] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:10] Comm buf exit code timeout (fffffffe/8279/1797097106/1797097106/00000000).
[2019-08-03 14:02:10] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:15] Comm buf exit code timeout (fffffffe/8279/978782290/978782290/00000000).
[2019-08-03 14:02:15] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:21] Comm buf exit code timeout (fffffffe/8279/-1271224750/-1271224750/00000000).
[2019-08-03 14:02:21] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:26] Comm buf exit code timeout (fffffffe/8279/-325876078/-325876078/00000000).
[2019-08-03 14:02:26] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:32] Comm buf exit code timeout (fffffffe/8279/-1610001454/-1610001454/00000000).
[2019-08-03 14:02:32] Warning: failed to initialize device number 9 (-42), retrying.
] Comm buf exit code timeout [2019-08-03 14:02:37] Comm buf exit code timeout (fffffffe/8279/-799468782/-799468782/00000000).
[2019-08-03 14:02:37] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:43] Comm buf exit code timeout (fffffffe/8279/-1791289070/-1791289070/00000000).
[2019-08-03 14:02:43] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:48] Comm buf exit code timeout (fffffffe/8279/301566738/301566738/00000000).
[2019-08-03 14:02:48] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:54] Comm buf exit code timeout (fffffffe/8279/1666831058/1666831058/00000000).
[2019-08-03 14:02:54] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:02:54] Initialize retry attempt successful for device number 9, continuing.
[2019-08-03 14:02:54] Initializing GPU10.
[2019-08-03 14:03:00] Comm buf exit code timeout (fffffffe/8279/1994231994/1994231994/00000000).
[2019-08-03 14:03:00] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:05] Comm buf exit code timeout (fffffffe/8279/1427017386/1427017386/00000000).
[2019-08-03 14:03:05] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:11] Comm buf exit code timeout (fffffffe/8279/-325728470/-325728470/00000000).
[2019-08-03 14:03:11] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:16] Comm buf exit code timeout (fffffffe/8279/-1641368678/-1641368678/00000000).
[2019-08-03 14:03:16] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:22] Comm buf exit code timeout (fffffffe/8279/1826234794/1826234794/00000000).
[2019-08-03 14:03:22] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:27] Comm buf exit code timeout (fffffffe/8279/-1995357398/-1995357398/00000000).
[2019-08-03 14:03:27] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:33] Comm buf exit code timeout (fffffffe/8279/-2145515174/-2145515174/00000000).
[2019-08-03 14:03:33] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:38] Comm buf exit code timeout (fffffffe/8279/493747626/493747626/00000000).
[2019-08-03 14:03:38] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:44] Comm buf exit code timeout (fffffffe/8279/663788218/663788218/00000000).
[2019-08-03 14:03:44] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:49] Comm buf exit code timeout (fffffffd/8279/-1366668886/-1366668886/00000000).
[2019-08-03 14:03:49] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 14:03:55] Comm buf exit code timeout (fffffffd/8279/1025767818/1025767818/00000000).
[2019-08-03 14:03:55] Failed to initialize device idx 10 (-42)
[2019-08-03 14:03:55] Successful clean shutdown.

teamredminer exited, waiting to cooldown a bit

          Team Red Miner version 0.5.6
[2019-08-03 14:03:58] Auto-detected AMD OpenCL platform 0
[2019-08-03 14:03:59] Initializing GPU 0.
[2019-08-03 14:04:00] Initializing GPU 1.
[2019-08-03 14:04:01] Initializing GPU 2.
[2019-08-03 14:04:01] Initializing GPU 3.
[2019-08-03 14:04:02] Initializing GPU 4.
[2019-08-03 14:04:08] Comm buf exit code timeout (fffffffe/8279/1209154322/1209154322/00000000).
[2019-08-03 14:04:08] Warning: failed to initialize device number 4 (-42), retrying.
[2019-08-03 14:04:13] Comm buf exit code timeout (fffffffe/8279/1916155282/1916155282/00000000).
[2019-08-03 14:04:13] Warning: failed to initialize device number 4 (-42), retrying.
[2019-08-03 14:04:14] Initialize retry attempt successful for device number 4, continuing.
[2019-08-03 14:04:14] Initializing GPU 5.
[2019-08-03 14:04:15] Initializing GPU 6.
[2019-08-03 14:04:16] Initializing GPU 7.
[2019-08-03 14:04:17] Initializing GPU 8.
[2019-08-03 14:04:17] Initializing GPU 9.
[2019-08-03 14:04:23] Comm buf exit code timeout (fffffffe/8279/1175757266/1175757266/00000000).
[2019-08-03 14:04:23] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:04:28] Comm buf exit code timeout (fffffffe/8279/13725970/13725970/00000000).
[2019-08-03 14:04:28] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:04:34] Comm buf exit code timeout (fffffffe/8279/-1078895214/-1078895214/00000000).
[2019-08-03 14:04:34] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:04:39] Comm buf exit code timeout (fffffffe/8279/480017874/480017874/00000000).
[2019-08-03 14:04:39] Warning: failed to initialize device number 9 (-42), retrying.
[2019-08-03 14:04:40] Initialize retry attempt successful for device number 9, continuing.
[2019-08-03 14:04:40] Initializing GPU10.
[2019-08-03 14:04:41] Initializing GPU11.
[2019-08-03 14:04:42] Initializing GPU12.
[2019-08-03 14:04:43] Watchdog thread starting.
[2019-08-03 14:04:43] Runtime Command Keys: h - help, s - stats, e - enable gpu, d - disable gpu, t - tuning mode, q - quit
[2019-08-03 14:04:43] Entered GPU ENABLE menu, press 0-9,A-F as the next key to enable gpu 0-15, or any other key to exit.
[2019-08-03 14:04:43] Exiting gpu enable sub-menu.
[2019-08-03 14:04:43] Entered GPU Tuning Mode menu, press 0-9,A-F as the next key to enable gpu 0-15.
[2019-08-03 14:04:43] Successfully initialized GPU 0: Polaris with 12 CU (PCIe 01:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Exiting gpu tuning sub-menu.
[2019-08-03 14:04:43] Entered GPU DISABLE menu, press 0-9,A-F as the next key to enable gpu 0-15.
[2019-08-03 14:04:43] GPU 4 is now disabled.
[2019-08-03 14:04:43] Entered GPU Tuning Mode menu, press 0-9,A-F as the next key to enable gpu 0-15.
[2019-08-03 14:04:43] Exiting gpu tuning sub-menu.
[2019-08-03 14:04:43] Entered GPU ENABLE menu, press 0-9,A-F as the next key to enable gpu 0-15, or any other key to exit.
[2019-08-03 14:04:43] Exiting gpu enable sub-menu.
[2019-08-03 14:04:43] Entered GPU Tuning Mode menu, press 0-9,A-F as the next key to enable gpu 0-15.
[2019-08-03 14:04:43] Exiting gpu tuning sub-menu.
[2019-08-03 14:04:43] Successfully initialized GPU 1: Polaris with 12 CU (PCIe 02:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 2: Polaris with 12 CU (PCIe 03:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 3: Polaris with 12 CU (PCIe 04:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 4: Polaris with 12 CU (PCIe 05:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 5: Polaris with 12 CU (PCIe 09:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 6: Polaris with 12 CU (PCIe 0b:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 7: Polaris with 12 CU (PCIe 0d:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 8: Polaris with 12 CU (PCIe 10:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU 9: Polaris with 12 CU (PCIe 11:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU10: Polaris with 12 CU (PCIe 12:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU11: Polaris with 12 CU (PCIe 13:00.0) (CN 4+3:AAA)
[2019-08-03 14:04:43] Successfully initialized GPU12: Polaris with 12 CU (PCIe 14:00.0) (CN 4+3:AAA)
[/size]


No CPU Usage/mining during that.

it starts in 2-3-4 attempts.. any ideas?
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.5.6 - Cryptonight Thread - High hashrate, Low Power
by
micax1
on 03/08/2019, 09:54:33 UTC
guys,
any suggestion on how to fix:

Code:
[2019-08-03 12:52:06] Auto-detected AMD OpenCL platform 0
[2019-08-03 12:52:07] Initializing GPU 0.
[2019-08-03 12:52:08] Initializing GPU 1.
[2019-08-03 12:52:09] Initializing GPU 2.
[2019-08-03 12:52:09] Initializing GPU 3.
[2019-08-03 12:52:10] Initializing GPU 4.
[2019-08-03 12:52:11] Initializing GPU 5.
[2019-08-03 12:52:12] Initializing GPU 6.
[2019-08-03 12:52:13] Initializing GPU 7.
[2019-08-03 12:52:14] Initializing GPU 8.
[2019-08-03 12:52:14] Initializing GPU 9.
[2019-08-03 12:52:15] Initializing GPU10.
[2019-08-03 12:52:21] Comm buf exit code timeout (fffffffe/8279/1364128554/1364128554/00000000).
[2019-08-03 12:52:21] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 12:52:26] Comm buf exit code timeout (fffffffe/8279/1963683322/1963683322/00000000).
[2019-08-03 12:52:26] Warning: failed to initialize device number 10 (-42), retrying.
[2019-08-03 12:52:32] Comm buf exit code timeout (fffffffd/8279/2128370346/2128370346/00000000).
[2019-08-03 12:52:32] Warning: failed to initialize device number 10 (-42), retrying.

Thanks.
Post
Topic
Board Mining (Altcoins)
Re: [ANN] TeamRedMiner 0.4.3 - Cryptonight Thread - High hashrate, Low Power
by
micax1
on 17/04/2019, 14:03:32 UTC
Does it support R9 cards - like 280x 290 290x?
Post
Topic
Board Announcements (Altcoins)
Re: HoboNickels - HBN - High Fast Stake - Version 2.0! More Secure, Less Intensive
by
micax1
on 18/03/2019, 06:00:59 UTC
Post
Topic
Board Announcements (Altcoins)
Re: HoboNickels - HBN - High Fast Stake - Version 2.0! More Secure, Less Intensive
by
micax1
on 16/03/2019, 05:45:12 UTC
can anyone give active peers list? cause i cant sync for looong time.
Thnx!
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
by
micax1
on 05/05/2018, 19:02:11 UTC
oh tahiti now i see. probably does not support overdriveN, just older versions

well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5
- take a look (opensource) its old but gold - working r9 to vega flawlessly.

right, overdrive 5. atm overdriveN only supported by miner. when i finish the important stuff i will look into it.

thanks man, and please take a look at fan speed control also.
currently it`s not setting speed at all. w 18.4.1 18.3.4 drivers tested at least on baffins (sapphire rx 550 2gb)
if you`ll need any help w testing let me know )
I am ready to test or provide you any logs.
hope you ll finish other stuff soon.
Thanks.
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
by
micax1
on 05/05/2018, 18:41:49 UTC
oh tahiti now i see. probably does not support overdriveN, just older versions

well it shows overdrive tab in AMD drivers gui & i am controlling it with overdrive5 tool... https://github.com/BackupGGCode/overdrive5
- take a look (opensource) its old but gold - working r9 to vega flawlessly.
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
by
micax1
on 05/05/2018, 18:26:25 UTC
i still don't understand what needs to be fixed, if ADL wasn't working you would get this :

GPU0:    486.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]

instead of this

GPU0:    486.0 H/S [T: 64c, RPM: 0, CC: 1215 MHz, MC: 1950 MHz]


[2018-05-05 20:29:03] GPU3:    587.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]

isn`t that what I got?
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.5.1
by
micax1
on 05/05/2018, 17:35:22 UTC

Are you going to fix ADL anytime soon?
tested on one more rig today:

Code:
[2018-05-05 20:29:03] GPU0:    486.0 H/S [T: 64c, RPM: 0, CC: 1215 MHz, MC: 1950 MHz]
[2018-05-05 20:29:03] GPU1:    476.0 H/S [T: 63c, RPM: 0, CC: 1215 MHz, MC: 1925 MHz]
[2018-05-05 20:29:03] GPU2:    488.0 H/S [T: 66c, RPM: 0, CC: 1215 MHz, MC: 1950 MHz]
[2018-05-05 20:29:03] GPU3:    587.0 H/S [T: 0c, RPM: 0, CC: 0 MHz, MC: 0 MHz]
[2018-05-05 20:29:03] GPU4:    494.0 H/S [T: 60c, RPM: 2890, CC: 1150 MHz, MC: 1900 MHz]
[2018-05-05 20:29:03] GPU5:    479.0 H/S [T: 64c, RPM: 2931, CC: 1150 MHz, MC: 1825 MHz]
[2018-05-05 20:29:03] GPU6:    449.0 H/S [T: 57c, RPM: 5188, CC: 1203 MHz, MC: 1750 MHz]
[2018-05-05 20:29:03] GPU7:    463.0 H/S [T: 51c, RPM: 3097, CC: 1250 MHz, MC: 1825 MHz]
[2018-05-05 20:29:03] GPU8:    466.0 H/S [T: 60c, RPM: 5201, CC: 1203 MHz, MC: 1825 MHz]
[2018-05-05 20:29:03] GPU9:    475.0 H/S [T: 64c, RPM: 0, CC: 1215 MHz, MC: 1925 MHz]
[2018-05-05 20:29:03] GPU10:    499.0 H/S [T: 58c, RPM: 3009, CC: 1150 MHz, MC: 1900 MHz]
[2018-05-05 20:29:03] Total:   5362.0 H/S

that`s rig with mixed lexa/baffin and 1 tahiti card
thats GCN 1st gen card - so everything supposed to be shown?

Code:
C:\SRBMiner>SRBMiner-CN.exe --listdevices
[2018-05-05 20:33:24] Platform #0
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] Intel(R) OpenCL
[2018-05-05 20:33:24] Intel(R) Corporation
[2018-05-05 20:33:24] OpenCL 2.1
[2018-05-05 20:33:24] DEVICES: 1
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [0]
[2018-05-05 20:33:24] Type: CPU
[2018-05-05 20:33:24] Vendor: INTEL
[2018-05-05 20:33:24] CU: 2
[2018-05-05 20:33:24] Error CL_INVALID_VALUE when getting pcie bus id
[2018-05-05 20:33:24] RAM: 4041 MB
[2018-05-05 20:33:24] BUSID: -1
[2018-05-05 20:33:24]
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] Platform #1
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] AMD Accelerated Parallel Processing
[2018-05-05 20:33:24] Advanced Micro Devices, Inc.
[2018-05-05 20:33:24] OpenCL 2.1 AMD-APP (2580.6)
[2018-05-05 20:33:24] DEVICES: 12
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [0]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 9
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [1]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 13
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [2]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 15
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [3]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 32
[2018-05-05 20:33:24] RAM: 3072 MB
[2018-05-05 20:33:24] BUSID: 1
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [4]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 12
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 11
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [5]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 12
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 10
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [6]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 6
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [7]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 2
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [8]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 3
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [9]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 8
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 5
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [10]
[2018-05-05 20:33:24] Type:GPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 12
[2018-05-05 20:33:24] RAM: 2048 MB
[2018-05-05 20:33:24] BUSID: 12
[2018-05-05 20:33:24]
[2018-05-05 20:33:24] DeviceID [11]
[2018-05-05 20:33:24] Type: CPU
[2018-05-05 20:33:24] Vendor: AMD
[2018-05-05 20:33:24] CU: 2
[2018-05-05 20:33:24] RAM: 4041 MB
[2018-05-05 20:33:24] BUSID: -1
[2018-05-05 20:33:24]
[2018-05-05 20:33:24]

forgot to mention win10 ltsb x64, amd - 18.4.1, miner - 15.1
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.5.0
by
micax1
on 01/05/2018, 14:12:41 UTC
V1.5.0
- Added option to reset (disable/enable) AMD gpu devices with devcon before mining (admin rights needed, miner will ask)
- Now you can disable/enable up to 19 GPU's by pressing 0 - 9 (gpu0 - gpu9) and shift+0 - shift+9 (gpu10 - gpu19) on the keyboard
- Cryptonight Alloy new algo added (active from block 44.000)
- Added periodical GPU hashrate in log file
- No more nan displayed in hashrate view  Smiley

To explain a little bit :

GPU resetting is done with devcon.exe, the same that is used for resetting Vega GPU's with some scripts. It finds all AMD GPU's in the system and disable/enables them before mining starts.
I know there will be some issues with this, like if you do it with a remote connection, it may freeze or drop. But this is something that is not miner related.
You need to give administrative privileges to SRBMiner if you don't want the permission dialog box pop up everytime when starting/restarting the miner. Also if a new empty window gets open, you can close it Smiley

Added possibility to disable/enable GPU's while mining. To maximize efficiency, when a device is disabled it won't get disabled right at that moment, it will first finish the round it is working on, and then it will stop working.
This is good for you because if some shares are found, they will be sent to the pool, and only after that the device will get disabled. This can sometimes take even 15-30 sec.
For GPU id's from 0-9 just press the corresponding key, for 10, 11, 12 ..etc use SHIFT+NUMBER, so if you want to disable GPU13, press SHIFT+3 on the keyboard.

Cryptonight Alloy added, use "cryptonight_type" : "alloy". Altough there is no test pool, so i could not try it first, just did everything by the informations the coin dev gave my. So at block 44.000 we will see is it working Smiley

looks good, great job.
any plans on fixing ADL?
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.9
by
micax1
on 30/04/2018, 07:39:15 UTC
You can always set fan speed, if temperature_target isn't working for you.
For ex you know the RPM you need, you can set it in gpu_conf.


here are logs and output for the above config:

Code:
[2018-04-30 10:33:41] AMD Platform ID: 0
[2018-04-30 10:33:41] AMD platform FOUND
[2018-04-30 10:33:41] Found 12 AMD devices
[2018-04-30 10:33:41] gpu_conf: GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 13]
[2018-04-30 10:33:41] gpu_conf: GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-04-30 10:33:41] gpu_conf: GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 15]
[2018-04-30 10:33:41] gpu_conf: GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 6]
[2018-04-30 10:33:41] gpu_conf: GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-04-30 10:33:41] gpu_conf: GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 14]
[2018-04-30 10:33:41] gpu_conf: GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 12]
[2018-04-30 10:33:41] gpu_conf: GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-04-30 10:33:41] gpu_conf: GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 2]
[2018-04-30 10:33:41] gpu_conf: GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 5]
[2018-04-30 10:33:41] gpu_conf: GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 11]
[2018-04-30 10:33:41] gpu_conf: GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 8]
[2018-04-30 10:33:41] ADL is enabled
[2018-04-30 10:33:41] CryptonightV7 mode enabled
[2018-04-30 10:33:41] PcieBusId[13] thread 0 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[13] thread 1 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[3] thread 2 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[3] thread 3 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[15] thread 4 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[15] thread 5 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[6] thread 6 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[6] thread 7 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[1] thread 8 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[1] thread 9 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[14] thread 10 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[14] thread 11 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[12] thread 12 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[12] thread 13 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[4] thread 14 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[4] thread 15 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[2] thread 16 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[2] thread 17 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[5] thread 18 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[5] thread 19 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[11] thread 20 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[11] thread 21 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[8] thread 22 using OCLKernelID 1
[2018-04-30 10:33:41] PcieBusId[8] thread 23 using OCLKernelID 1
[2018-04-30 10:33:41] Compiling kernel for GPU0 ...
[2018-04-30 10:33:42] Compiling kernel for GPU0 ...
[2018-04-30 10:33:43] Compiling kernel for GPU1 ...
[2018-04-30 10:33:45] Compiling kernel for GPU1 ...
[2018-04-30 10:33:46] Compiling kernel for GPU2 ...
[2018-04-30 10:33:47] Compiling kernel for GPU2 ...
[2018-04-30 10:33:48] Compiling kernel for GPU3 ...
[2018-04-30 10:33:49] Compiling kernel for GPU3 ...
[2018-04-30 10:33:50] Compiling kernel for GPU4 ...
[2018-04-30 10:33:52] Compiling kernel for GPU4 ...
[2018-04-30 10:33:53] Compiling kernel for GPU5 ...
[2018-04-30 10:33:54] Compiling kernel for GPU5 ...
[2018-04-30 10:33:55] Compiling kernel for GPU6 ...
[2018-04-30 10:33:56] Compiling kernel for GPU6 ...
[2018-04-30 10:33:58] Compiling kernel for GPU7 ...
[2018-04-30 10:33:59] Compiling kernel for GPU7 ...
[2018-04-30 10:34:00] Compiling kernel for GPU8 ...
[2018-04-30 10:34:01] Compiling kernel for GPU8 ...
[2018-04-30 10:34:02] Compiling kernel for GPU9 ...
[2018-04-30 10:34:04] Compiling kernel for GPU9 ...
[2018-04-30 10:34:05] Compiling kernel for GPU10 ...
[2018-04-30 10:34:06] Compiling kernel for GPU10 ...
[2018-04-30 10:34:07] Compiling kernel for GPU11 ...
[2018-04-30 10:34:08] Compiling kernel for GPU11 ...
[2018-04-30 10:34:10] ADL init successful
[2018-04-30 10:34:10] Gpu watchdog started
[2018-04-30 10:34:10] watchdog: Setting watchdog array to 0
[2018-04-30 10:34:10] on_reconnect: Connecting to cryptonightv7.eu.nicehash.com:3363
[2018-04-30 10:34:10] json_send: {"method":"login","params":{"login":"xxx.worker5","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.4.9"},"id":1}
[2018-04-30 10:34:11] json_receive: {"jsonrpc":"2.0","id":1,"error":null,"result":{"id":"152761423221685","status":"OK","job":{"job_id":"00000062b7b8af17","blob":"0909d48d9bd705a7ec0e1d898c77fbd3d4fc9b2e1545def6f0f47fba0758d1420b8183b1ce6a940000007193858bd8e0673135862e8a11dceea1991c0fad5edc5852c99cf4e7fdbbb6df0801","target":"c5a70000"}}}
[2018-04-30 10:34:11] sock_ready: User logged in
[2018-04-30 10:34:11] pool_have_job: Pool difficulty: 100001
[2018-04-30 10:34:11] pool_have_job: Pool sent a new job (ID: 00000062b7b8af17)
[2018-04-30 10:34:29] json_receive: {"params":{"job_id":"00000062b7b8d344","blob":"0909878e9bd705879eb03f0e8e55d2b4c51d8095f43be8e81b19732de565a37df16881ede575bc00000071a1765d17d3da8f011592090f45d19930751ba73880a24d4f390589ad795a9c5d01","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:34:29] pool_have_job: Pool sent a new job (ID: 00000062b7b8d344)
[2018-04-30 10:34:34] miner_result: Sending user result to pool
[2018-04-30 10:34:34] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b8d344","nonce":"a7aeca71","result":"131c6f142def47d5ca66ec1c35657faef8cb424af639d8d2a1168f525da60000"},"id":1}
[2018-04-30 10:34:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:34:35] miner_result: Pool accepted result 0x0000A65D
[2018-04-30 10:34:40] miner_result: Sending user result to pool
[2018-04-30 10:34:40] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b8d344","nonce":"c4b2ea71","result":"b55c57d33d422f03e8880f1f3aa068532ccd57f9541f843fdb5245a6da880000"},"id":1}
[2018-04-30 10:34:40] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:34:40] miner_result: Pool accepted result 0x000088DA
[2018-04-30 10:34:54] json_receive: {"params":{"job_id":"00000062b7b95e4b","blob":"0909f0939bd7052f7a78ac55e6ffc6fca9201ffdce7cadc2f26f4097aee4b55196b727c92a2da90000007127c4b4ffcb412ef95be0d1b9e6d886146cf7c9687aa388c237552d824674cbf801","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:34:54] pool_have_job: Pool sent a new job (ID: 00000062b7b95e4b)
[2018-04-30 10:35:08] miner_result: Sending user result to pool
[2018-04-30 10:35:08] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b95e4b","nonce":"e50c6071","result":"afac917811fcd4a0f346b013b9245497be54afc907784ef4e4a7fa57eea40000"},"id":1}
[2018-04-30 10:35:08] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:35:10] miner_result: Pool accepted result 0x0000A4EE
[2018-04-30 10:35:30] miner_result: Sending user result to pool
[2018-04-30 10:35:30] json_send: {"method":"submit","params":{"id":"152761423221685","job_id":"00000062b7b95e4b","nonce":"4a1e8071","result":"b611827cfbaa64ce62953387c2e8f2c2d94ae9114fbd74750402780a950a0000"},"id":1}
[2018-04-30 10:35:30] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2018-04-30 10:35:30] miner_result: Pool accepted result 0x00000A95
[2018-04-30 10:35:34] json_receive: {"params":{"job_id":"00000062b7ba12a4","blob":"0909c88e9bd7051071c57c2803d3fc792760debba8c0af050a45977290ebe6df0c1e13b6fa2e4800000071e3bc0be1a8908cfc53759526f8c488e3f67d08ce5e7a9ae422109ad06a04cf7a01","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:35:34] pool_have_job: Pool sent a new job (ID: 00000062b7ba12a4)
[2018-04-30 10:35:36] json_receive: {"params":{"job_id":"00000062b7ba1df0","blob":"0909c88e9bd7051071c57c2803d3fc792760debba8c0af050a45977290ebe6df0c1e13b6fa2e48000000d804aae8b7b24d9748cfcfaadc14a1aa2a7118602ba44a87fa25c2556ddc831a2901","target":"c5a70000"},"jsonrpc":"2.0","method":"job"}
[2018-04-30 10:35:36] pool_have_job: Pool sent a new job (ID: 00000062b7ba1df0)
[2018-04-30 10:35:52] Stopping miner process

Code:

GPU0: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 13]
GPU1: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 3]
GPU2: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 15]
GPU3: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 6]
GPU4: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 1]
GPU5: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 14]
GPU6: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 12]
GPU7: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 4]
GPU8: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 2]
GPU9: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 5]
GPU10: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 11]
GPU11: Radeon RX 550 Series [Baffin] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 8]

---------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.4.9
DevFee 1 minute every 2 hours (~ 0.85%)
Press 's' to get some stats
Press 'h' to get some hashrate
Give it a few minutes to reach maximum hashrate
---------------------------------------------------------
Total pools: 2

Please wait...

CryptonightV7 mode enabled

[2018-04-30 10:33:41] Heating up system, please wait...
[2018-04-30 10:33:41] Compiling kernel for GPU0 ...
[2018-04-30 10:33:42] Compiling kernel for GPU0 ...
[2018-04-30 10:33:43] Compiling kernel for GPU1 ...
[2018-04-30 10:33:45] Compiling kernel for GPU1 ...
[2018-04-30 10:33:46] Compiling kernel for GPU2 ...
[2018-04-30 10:33:47] Compiling kernel for GPU2 ...
[2018-04-30 10:33:48] Compiling kernel for GPU3 ...
[2018-04-30 10:33:49] Compiling kernel for GPU3 ...
[2018-04-30 10:33:50] Compiling kernel for GPU4 ...
[2018-04-30 10:33:52] Compiling kernel for GPU4 ...
[2018-04-30 10:33:53] Compiling kernel for GPU5 ...
[2018-04-30 10:33:54] Compiling kernel for GPU5 ...
[2018-04-30 10:33:55] Compiling kernel for GPU6 ...
[2018-04-30 10:33:56] Compiling kernel for GPU6 ...
[2018-04-30 10:33:58] Compiling kernel for GPU7 ...
[2018-04-30 10:33:59] Compiling kernel for GPU7 ...
[2018-04-30 10:34:00] Compiling kernel for GPU8 ...
[2018-04-30 10:34:01] Compiling kernel for GPU8 ...
[2018-04-30 10:34:02] Compiling kernel for GPU9 ...
[2018-04-30 10:34:04] Compiling kernel for GPU9 ...
[2018-04-30 10:34:05] Compiling kernel for GPU10 ...
[2018-04-30 10:34:06] Compiling kernel for GPU10 ...
[2018-04-30 10:34:07] Compiling kernel for GPU11 ...
[2018-04-30 10:34:08] Compiling kernel for GPU11 ...
[2018-04-30 10:34:10] ADL initialised successfully!
[2018-04-30 10:34:10] GPU0:    nan H/S [T: 32c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU1:    nan H/S [T: 48c, RPM: 0, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:10] GPU2:    nan H/S [T: 49c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU3:    nan H/S [T: 43c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU4:    nan H/S [T: 43c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU5:    nan H/S [T: 40c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU6:    nan H/S [T: 46c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU7:    nan H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU8:    nan H/S [T: 44c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU9:    nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU10:    nan H/S [T: 42c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] GPU11:    nan H/S [T: 51c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:10] Connecting to cryptonightv7.eu.nicehash.com:3363
[2018-04-30 10:34:10] Connected!
[2018-04-30 10:34:11] User logged in
[2018-04-30 10:34:11] Pool difficulty: 100001
[2018-04-30 10:34:11] Pool sent a new job (ID: 00000062b7b8af17)
[2018-04-30 10:34:20] GPU0:    nan H/S [T: 41c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU1:    nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:20] GPU2:    nan H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU3:    nan H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU4:    nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU5:    nan H/S [T: 48c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU6:    nan H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU7:    nan H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU8:    nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU9:    nan H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU10:    nan H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:20] GPU11:    nan H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU0:    479.0 H/S [T: 43c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU1:    419.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:26] GPU2:    494.0 H/S [T: 59c, RPM: 671, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU3:    445.0 H/S [T: 54c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU4:    453.0 H/S [T: 54c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU5:    455.0 H/S [T: 50c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU6:    451.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU7:    449.0 H/S [T: 57c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU8:    448.0 H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU9:    233.0 H/S [T: 60c, RPM: 3168, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU10:    483.0 H/S [T: 49c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] GPU11:    224.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:26] Total:   5033.0 H/S
[2018-04-30 10:34:29] Pool sent a new job (ID: 00000062b7b8d344)
[2018-04-30 10:34:30] GPU0:    486.0 H/S [T: 45c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU1:    444.0 H/S [T: 60c, RPM: 2618, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:30] GPU2:    499.0 H/S [T: 60c, RPM: 3189, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU3:    456.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU4:    457.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU5:    459.0 H/S [T: 51c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU6:    455.0 H/S [T: 60c, RPM: 2626, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU7:    451.0 H/S [T: 59c, RPM: 1463, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU8:    448.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU9:    476.0 H/S [T: 60c, RPM: 3241, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU10:    488.0 H/S [T: 50c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] GPU11:    447.0 H/S [T: 60c, RPM: 3057, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:30] Total:   5566.0 H/S
[2018-04-30 10:34:35] Pool accepted result 0x0000A65D
[2018-04-30 10:34:35] GPU0:    490.0 H/S [T: 47c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU1:    453.0 H/S [T: 60c, RPM: 3143, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:35] GPU2:    499.0 H/S [T: 59c, RPM: 3190, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU3:    493.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU4:    459.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU5:    461.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU6:    459.0 H/S [T: 60c, RPM: 3251, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU7:    455.0 H/S [T: 61c, RPM: 3143, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU8:    450.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU9:    498.0 H/S [T: 60c, RPM: 3223, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU10:    492.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] GPU11:    449.0 H/S [T: 60c, RPM: 3236, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:35] Total:   5658.0 H/S
[2018-04-30 10:34:40] Pool accepted result 0x000088DA
[2018-04-30 10:34:41] GPU0:    492.0 H/S [T: 48c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU1:    457.0 H/S [T: 60c, RPM: 3115, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:41] GPU2:    499.0 H/S [T: 59c, RPM: 3242, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU3:    492.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU4:    461.0 H/S [T: 60c, RPM: 2966, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU5:    463.0 H/S [T: 55c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU6:    461.0 H/S [T: 60c, RPM: 3242, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU7:    459.0 H/S [T: 60c, RPM: 3155, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU8:    455.0 H/S [T: 60c, RPM: 3089, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU9:    498.0 H/S [T: 59c, RPM: 3214, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU10:    494.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] GPU11:    448.0 H/S [T: 60c, RPM: 3248, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:41] Total:   5679.0 H/S
[2018-04-30 10:34:50] GPU0:    494.0 H/S [T: 51c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU1:    455.0 H/S [T: 60c, RPM: 3135, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 10:34:50] GPU2:    499.0 H/S [T: 58c, RPM: 3274, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU3:    493.0 H/S [T: 59c, RPM: 3185, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU4:    482.0 H/S [T: 59c, RPM: 3236, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU5:    466.0 H/S [T: 58c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU6:    465.0 H/S [T: 60c, RPM: 3232, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU7:    464.0 H/S [T: 60c, RPM: 3108, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU8:    460.0 H/S [T: 58c, RPM: 3203, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU9:    499.0 H/S [T: 59c, RPM: 3215, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU10:    494.0 H/S [T: 56c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] GPU11:    479.0 H/S [T: 59c, RPM: 3239, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 10:34:50] Total:   5750.0 H/S
[2018-04-30 10:34:54] Pool sent a new job (ID: 00000062b7b95e4b)
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.9
by
micax1
on 30/04/2018, 07:15:43 UTC
You can always set fan speed, if temperature_target isn't working for you.
For ex you know the RPM you need, you can set it in gpu_conf.

Code:
{
"cryptonight_type" : "normalv7",
"log_file" : "log.log",
"intensity" : 23,
"double_threads" : true,
/*"target_temperature" : 55,*/
"shutdown_temperature" : 80,
"gpu_conf" :
[
{ "id" : 0, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 1, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 2, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 3, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 4, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 5, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 6, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 7, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 8, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 9, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 10, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
{ "id" : 11, "intensity" : 23, "worksize" : 8, "threads" : 2, "target_fan_speed" : 3000},
]
}

Code:
C:\SRBMiner>SRBMiner-CN.exe --listdevices
[2018-04-30 10:10:22] Platform #0
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] AMD Accelerated Parallel Processing
[2018-04-30 10:10:22] Advanced Micro Devices, Inc.
[2018-04-30 10:10:22] OpenCL 2.1 AMD-APP (2527.10)
[2018-04-30 10:10:22] DEVICES: 13
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [0]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 13
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [1]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 10
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 3
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [2]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 15
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [3]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 6
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [4]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 1
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [5]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 14
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [6]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 12
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [7]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 4
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [8]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 2
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [9]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 5
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [10]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 11
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [11]
[2018-04-30 10:10:22] Type:GPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 12
[2018-04-30 10:10:22] RAM: 2048 MB
[2018-04-30 10:10:22] BUSID: 8
[2018-04-30 10:10:22]
[2018-04-30 10:10:22] DeviceID [12]
[2018-04-30 10:10:22] Type: CPU
[2018-04-30 10:10:22] Vendor: AMD
[2018-04-30 10:10:22] CU: 2
[2018-04-30 10:10:22] RAM: 4034 MB
[2018-04-30 10:10:22] BUSID: -1
[2018-04-30 10:10:22]
[2018-04-30 10:10:22]




can you please confirm that this config is correct?
because it`s not setting fan speeds to 3000
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.9
by
micax1
on 30/04/2018, 06:40:58 UTC
target_fan_speed in RPM should be only added to gpu_config section only, per card basis?
Yes

target_temperature should work in general section by design?
If you omit the setting on top of config, it assumes it's not set.
If you set it > 0 , it will use it for every card available.
If you set it to 0, or omit it completely, and put it in gpu_conf section for each card, then it will use those settings.

Why i made it like this ?
By setting target temp on top, every card will adjust it's fanspeed to maintain this temperature.
Target fan speed isn't supported in general section cause it's something that is let's say unique for every card.
Fan speed 3000 may hold one card on 45c , other on 60.
well not in case you have rx 550 rigs.. that have 12 cards each. but that`s ok, % is more reliable for general case, i can agree.

It does, but i don't know how it should work if you set one thing with 3rd party tool, one in miner. You set fans on 75%, but want temperature 55c.
So do you want 55c or 75% fan speed ? Smiley


if only miner can control fans out-of the-box with target temperature, I turn off all third party tools, and enjoy easy deploy and config.
however its not the case (


Thats waht i get with only miner control of fans:
(temps above 70 are devastating for these cards - and they hit it pretty quick)

Code:
[2018-04-29 17:41:59] GPU0:    465.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU1:    435.0 H/S [T: 62c, RPM: 904, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:41:59] GPU2:    499.0 H/S [T: 60c, RPM: 860, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU3:    499.0 H/S [T: 59c, RPM: 813, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU4:    460.0 H/S [T: 60c, RPM: 870, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU5:    449.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU6:    397.0 H/S [T: 61c, RPM: 863, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU7:    437.0 H/S [T: 62c, RPM: 815, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU8:    496.0 H/S [T: 59c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU9:    492.0 H/S [T: 61c, RPM: 1061, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU10:    452.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU11:    499.0 H/S [T: 62c, RPM: 924, CC: 1150 MHz, MC: 1900 MHz]


edit:
(target temperature was set in that case above) w no third party utils setting fans.
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.9
by
micax1
on 30/04/2018, 06:06:10 UTC

From the first page :

V1.4.8
- Added support for new ArtoCash algo
- Added fast pool switching when pressing P
- Added target_temperature setting to gpu_conf too, if this option is used on top of config (value is > 0), gpu_conf setting is IGNORED
- Added target_fan_speed setting to gpu_conf, atm must set it in RPM, not in percent, sorry Smiley
- Minor bug fixes
[/quote]

here is sample config from 1.4.9 that comes with miner:
Code:
{
/* Type can be : normal, normalv7, lite, litev7, heavy, ipbc, artocash  */
"cryptonight_type" : "normalv7",

/* Intensity 0-> auto intensity, or value from 1-300  */
"intensity" : 0,

/* To use 2 threads per card set double_threads to true  */
"double_threads" : false,

/* Uncomment this if you want to set GPU target temperature  */
/*"target_temperature" : 0,*/

/* Uncomment this if you want to set system shutdown temperature  */
/*"shutdown_temperature" : 90,*/

/* Uncomment this if you don't want to use the built in watchdog, but you want a script to run on GPU fail */
/* If you use the reboot-windows.bat it will restart your computer if a GPU fail occurs */
/*"reboot_script" : "reboot-windows.bat",*/

/* Advanced settings for each GPU manually */
/* Put in devices that you want to use, if you for ex. don't want to use gpu 2, just don't insert it,like in this example */
/* Id starts from 0 , not from 1 !! */
/* To get a list of available devices with their id's, use --listdevices parameter */
/* This is just an example, edit it and remove comment lines !! */

/*"gpu_conf" :
[
{ "id" : 0, "intensity" : 80, "worksize" : 8, "threads" : 1},
{ "id" : 1, "intensity" : 40, "worksize" : 8, "threads" : 2},
{ "id" : 3, "intensity" : 30, "worksize" : 8, "threads" : 2},
{ "id" : 4, "intensity" : 90, "worksize" : 8, "threads" : 1}
]*/
}

Well
So... as it lacks example in config... let me assume:
target_fan_speed in RPM should be only added to gpu_config section only, per card basis?
target_temperature should work in general section by design?

here is config I tried today w 1.4.9, win10ltsb, 18.3.4 drivers:
Code:
{
"cryptonight_type" : "normalv7",
"log_file" : "log.log",
"intensity" : 23,
"double_threads" : true,
"target_temperature" : 55,
"shutdown_temperature" : 90,
}


and here are the temps without adldisable and with fan control from third party util set to 75% of RPM

Code:
[2018-04-30 09:05:02] GPU0:    466.0 H/S [T: 59c, RPM: 2782, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU1:    456.0 H/S [T: 60c, RPM: 2854, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-30 09:05:02] GPU2:    499.0 H/S [T: 56c, RPM: 2974, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU3:    497.0 H/S [T: 59c, RPM: 3041, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU4:    499.0 H/S [T: 57c, RPM: 2988, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU5:    466.0 H/S [T: 61c, RPM: 3038, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU6:    499.0 H/S [T: 63c, RPM: 3036, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU7:    499.0 H/S [T: 62c, RPM: 2904, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU8:    499.0 H/S [T: 57c, RPM: 3044, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU9:    499.0 H/S [T: 57c, RPM: 2937, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU10:    460.0 H/S [T: 54c, RPM: 2798, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] GPU11:    492.0 H/S [T: 60c, RPM: 2998, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-30 09:05:02] Total:   5831.0 H/S

it`s just after couple minutes - and it will go higher...
so does target_temperature do anything? (in general section)


what card of this Rig?

12* rx 550 on baffin chip.

Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.9
by
micax1
on 29/04/2018, 14:50:30 UTC
old bug on old drivers. On blockchain and newer (18.3.4) its working as its supposed to.
The easiest fix is to update your drivers Smiley

will try today )

i hope it helps, if not i will look into it.



checked 18.3.4 today.

Code:
[2018-04-29 17:41:59] GPU0:    465.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU1:    435.0 H/S [T: 62c, RPM: 904, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:41:59] GPU2:    499.0 H/S [T: 60c, RPM: 860, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU3:    499.0 H/S [T: 59c, RPM: 813, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU4:    460.0 H/S [T: 60c, RPM: 870, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU5:    449.0 H/S [T: 53c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU6:    397.0 H/S [T: 61c, RPM: 863, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU7:    437.0 H/S [T: 62c, RPM: 815, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU8:    496.0 H/S [T: 59c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU9:    492.0 H/S [T: 61c, RPM: 1061, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU10:    452.0 H/S [T: 52c, RPM: 0, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:41:59] GPU11:    499.0 H/S [T: 62c, RPM: 924, CC: 1150 MHz, MC: 1900 MHz]

however config includes following:

"target_temperature" : 55,
"target_fan_speed" : 3300,

in general section

target fan speed basically not set?

here is the same drivers w your miner, but with 3-rd party overdrive util:

Code:
[2018-04-29 17:49:59] GPU0:    495.0 H/S [T: 49c, RPM: 3083, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU1:    457.0 H/S [T: 52c, RPM: 3196, CC: 1150 MHz, MC: 1800 MHz]
[2018-04-29 17:49:59] GPU2:    411.0 H/S [T: 49c, RPM: 3297, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU3:    464.0 H/S [T: 50c, RPM: 3384, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU4:    461.0 H/S [T: 51c, RPM: 3305, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU5:    494.0 H/S [T: 52c, RPM: 3378, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU6:    494.0 H/S [T: 52c, RPM: 3354, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU7:    458.0 H/S [T: 53c, RPM: 3229, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU8:    499.0 H/S [T: 50c, RPM: 3393, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU9:    499.0 H/S [T: 53c, RPM: 3234, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU10:    493.0 H/S [T: 50c, RPM: 3116, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] GPU11:    461.0 H/S [T: 52c, RPM: 3295, CC: 1150 MHz, MC: 1900 MHz]
[2018-04-29 17:49:59] Total:   5686.0 H/S
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.9
by
micax1
on 28/04/2018, 04:15:04 UTC
old bug on old drivers. On blockchain and newer (18.3.4) its working as its supposed to.
The easiest fix is to update your drivers Smiley

will try today )
Post
Topic
Board Mining (Altcoins)
Re: SRBMiner Cryptonight AMD GPU Miner V1.4.8
by
micax1
on 27/04/2018, 20:32:21 UTC

There is currently an issue in the AMD Adrenalin drivers (17.12.1+) that makes pciebus detection impossible. AMD is aware of the bug and hopefully there is a new version that fixes it soon. Update: 18.1.1 Alpha drivers tested and bug remains.

In a functioning driver, a query returns the PCIe bus ID for each GPU, however in the Adrenalin drivers a bus ID of 0 is always returned.
This bus ID is necessary to query the AMD Display Library (ADL). Because bus IDs are not actually being returned,  ADL cant get information like temperature/usage, UUID, PCIe location, etc.


So i found what is causing the problem, but i don't understand how does Claymore miner detect busid on those drivers. ? Smiley

I can add a parameter where you can manually enter busid, and it should work. It's easy to get PCI bus id from device manager.



well that an old bug.. and pretty well known... not only claymore miners, but sgminer-gm correctly work with AMD`s moreover gateless gate miner sharp (written in managed c# and using cloo lib) is doing the same.
so it`s look quite possible. you can check on how open source(sgminer gm or gateless gate sharp) stuff is doing that )
if you need help as a bet tester, i am willing to do so.
I do believe you can do it )