Search content
Sort by
Showing 14 of 14 results by minerator
Re: [ANN] ORCACOIN LAUNCHED - 500,000 ORCA IN CHARITY FUND!!! NEW POOLS NOW ADDED
how long should it take for the wallet to sync?
hi it is syncing now
Re: [ANN] Lazycoins.com - Crypto Exchange (BTC, LTC, DOGE, and ALTCOIN market pairs)
Re: [ANN] ORCACOIN LAUNCHED - 500,000 ORCA IN CHARITY FUND!!! NEW POOLS NOW ADDED
Re: [ANN] ORCACOIN LAUNCHED - 500,000 ORCA IN CHARITY FUND!!! NEW POOLS NOW ADDED
What mining software do you use?
What error do you get? I am mining fine here on our ORCA pool from three different locations (CPU mining to test).
http://i.imgur.com/daXu44d.png
Instead of the previous cgminer config, try:
Replace 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC with your own ORCA address. It's possible you have to add other parameters to optimize performance, but this should work.
Or, edit cgminer.conf
Otherwise, try GUIminer-scrypt: https://bitcointalk.org/index.php?topic=150331.msg1597536#msg1597536
Fill in these;
What error do you get? I am mining fine here on our ORCA pool from three different locations (CPU mining to test).
http://i.imgur.com/daXu44d.png
Instead of the previous cgminer config, try:
Code:
cgminer --scrypt -o stratum+tcp://85.25.209.87:7535 -u 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC -p x
Replace 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC with your own ORCA address. It's possible you have to add other parameters to optimize performance, but this should work.
Or, edit cgminer.conf
Code:
{
"pools" : [
{
"url" : "stratum+tcp://85.25.209.87:7535",
"user" : "4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC",
"pass" : "x"
}
],
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "stratum+tcp://85.25.209.87:7535",
"user" : "4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC",
"pass" : "x"
}
],
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
}
Otherwise, try GUIminer-scrypt: https://bitcointalk.org/index.php?topic=150331.msg1597536#msg1597536
Fill in these;
- host: 85.25.209.87
- port: 7535
- username: yourORCAaddress
- password; x
Ok I'll try again
Ok working now
Re: [ANN] ORCACOIN LAUNCHED - 500,000 ORCA IN CHARITY FUND!!! NEW POOLS NOW ADDED
What mining software do you use?
What error do you get? I am mining fine here on our ORCA pool from three different locations (CPU mining to test).
http://i.imgur.com/daXu44d.png
Instead of the previous cgminer config, try:
Replace 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC with your own ORCA address. It's possible you have to add other parameters to optimize performance, but this should work.
Or, edit cgminer.conf
Otherwise, try GUIminer-scrypt: https://bitcointalk.org/index.php?topic=150331.msg1597536#msg1597536
Fill in these;
What error do you get? I am mining fine here on our ORCA pool from three different locations (CPU mining to test).
http://i.imgur.com/daXu44d.png
Instead of the previous cgminer config, try:
Code:
cgminer --scrypt -o stratum+tcp://85.25.209.87:7535 -u 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC -p x
Replace 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC with your own ORCA address. It's possible you have to add other parameters to optimize performance, but this should work.
Or, edit cgminer.conf
Code:
{
"pools" : [
{
"url" : "stratum+tcp://85.25.209.87:7535",
"user" : "4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC",
"pass" : "x"
}
],
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
}
"pools" : [
{
"url" : "stratum+tcp://85.25.209.87:7535",
"user" : "4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC",
"pass" : "x"
}
],
"scrypt" : true,
"kernel-path" : "/usr/local/bin"
}
Otherwise, try GUIminer-scrypt: https://bitcointalk.org/index.php?topic=150331.msg1597536#msg1597536
Fill in these;
- host: 85.25.209.87
- port: 7535
- username: yourORCAaddress
- password; x
Ok I'll try again
Re: [ANN] ORCACOIN SUCCESSFUL LAUNCH - 500,000 ORCA IN CHARITY FUND!!! NEW POOLS PLS
Mining pool has been set up.
http://85.25.209.87:7535
Use your ORCA address as username and any password will work.
Example config cgminer (GPU Mining)
Example config minerd (CPU Mining)
Pool donations: 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC
http://85.25.209.87:7535
Use your ORCA address as username and any password will work.
Example config cgminer (GPU Mining)
Code:
cgminer.exe --scrypt -o stratum+tcp://85.25.209.87:7535 -u 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC -p x
Example config minerd (CPU Mining)
Code:
minerd.exe -o stratum+tcp://85.25.209.87:7535 -u 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC -p 1 -t 4
Pool donations: 4RccNbHNouiuCvebS4cC4cajnKnKtFaDpC
Hi tried to mine on the new pool but not linking through
Re: [ANN] ORCACOIN SUCCESSFUL LAUNCH - 500,000 ORCA IN CHARITY FUND!!! NEW POOLS PLS
Please make some pools - here is the conf file -
Sample orcacoin.conf file
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
testnet=0
# Connect via a socks4 proxy
#proxy=127.0.0.1:9050
##############################################################
## Quick Primer on addnode vs connect ##
## Let's say for instance you use addnode=4.2.2.4 ##
## addnode will connect you to and tell you about the ##
## nodes connected to 4.2.2.4. In addition it will tell ##
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ##
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ##
## finding nodes, add some using 'addnode'. ##
## ##
## If you want to stay private, use 'connect' to only ##
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ##
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ##
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ##
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
addnode=62.254.202.134
addnode=62.254.202.137
# ... or use as many connect= settings as you like to connect ONLY
# to specific peers:
#connect=69.164.218.197
#connect=62.254.202.137
# Maximum number of inbound+outbound connections.
#maxconnections=
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
# server=1 tells Bitcoin-QT to accept JSON-RPC commands.
server=1
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=
rpcpassword=
#rpcuser=
#rpcpassword=
# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
#rpctimeout=30
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
# rpcallowip=62.254.202.*
# Listen for RPC connections on this TCP port:
#rpcport=7537
# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
# rpcconnect=192.168.1.33
# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
rpcssl=0
# OpenSSL settings used when rpcssl=1
#rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
#rpcsslcertificatechainfile=server.cert
#rpcsslprivatekeyfile=server.pem
# Miscellaneous options
# Set gen=1 to attempt to generate bitcoins
gen=0
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
keypool=100
# Pay an optional transaction fee every time you send bitcoins. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
#paytxfee=0.00
# Allow direct connections for the 'pay via IP address' feature.
#allowreceivebyip=1
# User interface options
# Start Bitcoin minimized
#min=1
# Minimize to the system tray
#minimizetotray=1
Sample orcacoin.conf file
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
testnet=0
# Connect via a socks4 proxy
#proxy=127.0.0.1:9050
##############################################################
## Quick Primer on addnode vs connect ##
## Let's say for instance you use addnode=4.2.2.4 ##
## addnode will connect you to and tell you about the ##
## nodes connected to 4.2.2.4. In addition it will tell ##
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ##
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ##
## finding nodes, add some using 'addnode'. ##
## ##
## If you want to stay private, use 'connect' to only ##
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ##
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ##
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ##
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
addnode=62.254.202.134
addnode=62.254.202.137
# ... or use as many connect= settings as you like to connect ONLY
# to specific peers:
#connect=69.164.218.197
#connect=62.254.202.137
# Maximum number of inbound+outbound connections.
#maxconnections=
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
# server=1 tells Bitcoin-QT to accept JSON-RPC commands.
server=1
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=
rpcpassword=
#rpcuser=
#rpcpassword=
# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
#rpctimeout=30
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
# rpcallowip=62.254.202.*
# Listen for RPC connections on this TCP port:
#rpcport=7537
# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
# rpcconnect=192.168.1.33
# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
rpcssl=0
# OpenSSL settings used when rpcssl=1
#rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
#rpcsslcertificatechainfile=server.cert
#rpcsslprivatekeyfile=server.pem
# Miscellaneous options
# Set gen=1 to attempt to generate bitcoins
gen=0
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
keypool=100
# Pay an optional transaction fee every time you send bitcoins. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
#paytxfee=0.00
# Allow direct connections for the 'pay via IP address' feature.
#allowreceivebyip=1
# User interface options
# Start Bitcoin minimized
#min=1
# Minimize to the system tray
#minimizetotray=1
we dont need more pools, we need good coins, not more SHITCOINS
We agree - thats why we developed ORCACOIN!!! A Coin designed to give something back.
Then make your own pool, we have more coins to mine
We did have a pool which crashed due to the number of people trying to mine it. Before we restart our pool to want to ensure everybody who mined gets their coins. In the meantime, we recommended hashfever and due to the demand, they also crashed. That is why we are asking for more pools.
Enjoy your mining Mr Jitters
Quote from: orcacoin on Today at 02:43:34 PM
Quote from: Mrjitter on Today at 02:39:52 PM
Quote from: orcacoin on Today at 12:02:14 PM
Please make some pools - here is the conf file -
Sample orcacoin.conf file
# Network-related settings:
# Run on the test network instead of the real bitcoin network.
testnet=0
# Connect via a socks4 proxy
#proxy=127.0.0.1:9050
##############################################################
## Quick Primer on addnode vs connect ##
## Let's say for instance you use addnode=4.2.2.4 ##
## addnode will connect you to and tell you about the ##
## nodes connected to 4.2.2.4. In addition it will tell ##
## the other nodes connected to it that you exist so ##
## they can connect to you. ##
## connect will not do the above when you 'connect' to it. ##
## It will *only* connect you to 4.2.2.4 and no one else.##
## ##
## So if you're behind a firewall, or have other problems ##
## finding nodes, add some using 'addnode'. ##
## ##
## If you want to stay private, use 'connect' to only ##
## connect to "trusted" nodes. ##
## ##
## If you run multiple nodes on a LAN, there's no need for ##
## all of them to open lots of connections. Instead ##
## 'connect' them all to one node that is port forwarded ##
## and has lots of connections. ##
## Thanks goes to [Noodle] on Freenode. ##
##############################################################
# Use as many addnode= settings as you like to connect to specific peers
addnode=62.254.202.134
addnode=62.254.202.137
# ... or use as many connect= settings as you like to connect ONLY
# to specific peers:
#connect=69.164.218.197
#connect=62.254.202.137
# Maximum number of inbound+outbound connections.
#maxconnections=
# JSON-RPC options (for controlling a running Bitcoin/bitcoind process)
# server=1 tells Bitcoin-QT to accept JSON-RPC commands.
server=1
# You must set rpcuser and rpcpassword to secure the JSON-RPC api
rpcuser=
rpcpassword=
#rpcuser=
#rpcpassword=
# How many seconds bitcoin will wait for a complete RPC HTTP request.
# after the HTTP connection is established.
#rpctimeout=30
# By default, only RPC connections from localhost are allowed. Specify
# as many rpcallowip= settings as you like to allow connections from
# other hosts (and you may use * as a wildcard character).
# NOTE: opening up the RPC port to hosts outside your local
# trusted network is NOT RECOMMENDED, because the rpcpassword
# is transmitted over the network unencrypted.
# rpcallowip=62.254.202.*
# Listen for RPC connections on this TCP port:
#rpcport=7537
# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind
# running on another host using this option:
# rpcconnect=192.168.1.33
# Use Secure Sockets Layer (also known as TLS or HTTPS) to communicate
# with Bitcoin -server or bitcoind
rpcssl=0
# OpenSSL settings used when rpcssl=1
#rpcsslciphers=TLSv1+HIGH:!SSLv2:!aNULL:!eNULL:!AH:!3DES:@STRENGTH
#rpcsslcertificatechainfile=server.cert
#rpcsslprivatekeyfile=server.pem
# Miscellaneous options
# Set gen=1 to attempt to generate bitcoins
gen=0
# Pre-generate this many public/private key pairs, so wallet backups will be valid for
# both prior transactions and several dozen future transactions.
keypool=100
# Pay an optional transaction fee every time you send bitcoins. Transactions with fees
# are more likely than free transactions to be included in generated blocks, so may
# be validated sooner.
#paytxfee=0.00
# Allow direct connections for the 'pay via IP address' feature.
#allowreceivebyip=1
# User interface options
# Start Bitcoin minimized
#min=1
# Minimize to the system tray
#minimizetotray=1
