Search content
Sort by
Showing 20 of 21 results by mohicans
Re: A3/D3 Voltage modification file for Antminer A3 and D3 - free
nice work!!
i am not sure how low we can set the voltage since the default is already at 0xb8... the lowest we can go is 0xfe.
I think Bitmain already pushed this chip to the max.
i am not sure how low we can set the voltage since the default is already at 0xb8... the lowest we can go is 0xfe.
I think Bitmain already pushed this chip to the max.
how do I read the chain voltage?
I tried :
root@antMiner:/config# ./get_voltage
but its says not found... FYI, I can apply voltage successfully..
I thought of reading it before applying changes...
I tried :
root@antMiner:/config# ./get_voltage
but its says not found... FYI, I can apply voltage successfully..
I thought of reading it before applying changes...
Re: [Awesome Miner]- Powerful Windows GUI to manage and monitor up to 5000 miners
Hi guys,
I'm getting this issue as well, Cast XMR is listed on the Managed Software section but not selectable within the Profit Profiles
Thanks
I just have one question, I see cast-xmr in "managed miners" but I can't select it in my profit profiles, how do I make my miners use it for cryptonight?
Cast XMR was introduced as a Managed Miner, but not yet listed as an option for Profit switching. I was hoping to get some feedback on the Cast XMR implementation made so far before I make it available for profit switching as well - because then much more people will start using it.I'm getting this issue as well, Cast XMR is listed on the Managed Software section but not selectable within the Profit Profiles
Thanks
Awesome Miner version 4.2.4
- Cast XMR miner supported as Managed Miner
- New settings for wait time before terminating mining software and delay for auto starting miners on bootup
- Command line and custom exe-file configurable per Managed Profit Miner
- "Remove miner" added to context menu in miner list
- South African Rand added as display currency
- E-mail configuration includes a button for sending a test message
- Disabled Blake2b (sia) on Ccminer
- Correction to Wallet balance list
- Correction to benchmarking
I love you patrike thanks so much for this update - Cast XMR miner supported as Managed Miner
- New settings for wait time before terminating mining software and delay for auto starting miners on bootup
- Command line and custom exe-file configurable per Managed Profit Miner
- "Remove miner" added to context menu in miner list
- South African Rand added as display currency
- E-mail configuration includes a button for sending a test message
- Disabled Blake2b (sia) on Ccminer
- Correction to Wallet balance list
- Correction to benchmarking
I just have one question, I see cast-xmr in "managed miners" but I can't select it in my profit profiles, how do I make my miners use it for cryptonight?
I guess we'll have to wait awhile till it is implemented on profit miner
Hi Blissz..
How do I know which version of firmware that I am running now? Sounds silly as I did not write it down as a note..LOL..
I tried using Bitmain Miner Tool, it only shows "unknown". With officical Bitmain's firmare, it will show..
How do I know which version of firmware that I am running now? Sounds silly as I did not write it down as a note..LOL..
I tried using Bitmain Miner Tool, it only shows "unknown". With officical Bitmain's firmare, it will show..
Currently testing the next version. It cointains a fix for the restart on low hashrate detection + it includes an upgrade from cgminer 4.9 to cgminer 4.10
I hope we still have the option to use or not to use the auto restart. I am using Awesomeminer for that already.
BTW,, 2 x D3 is now on the latest firmware mod. both at 16.15Ghs @ 830W
@blissz,
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
Some early ones from me didn't have the blissz extension, but in filesize they were larger:
All are my firmwares, expect number 5.
Thanks Blissz... I guess that is Bitmain's official
@blissz,
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
I did download all the firmware you posted as well as those official from Bitmain.. but now I am confused after seeing the file names.. Not sure if I have mixed the official Bitmain and yours in the same folder...
1. Antminer-D3-20171120_3-blissz.tar
2. Antminer-D3-20171121_3-blissz.tar
3. Antminer-D3-20171123_2-blissz.tar
4. Antminer-D3-20171125_0-blissz.tar
5. Antminer-D3-201709131713-0M.tar
6. Antminer-D3-201711162229-0M.tar
7. Antminer-D3-201711172221-0M.tar
8. Antminer-D3-201711182222-0M.tar
How do I know if file no 5-8 is official Bitmain's or it is also Blissz's? I am not sure if Blissz added "blissz" in his 1st & 2nd released firmware..
Can you show how?
I am a bit confused... -o stratum+tcp://.mine.zpool.ca:#xnsub -u [-p c=
Re: Antminer D3 firmware modification thread (PUBLIC BETA available!)
oh crap my antminer goes to ultra high fan speed every hour just after ending dev fee , pls someone how to avoid this? , and i noticed that the prority is 1 on devfee so if the pool goes down i loose mining? , have someone the original firmware??
Can the fan don't go to high speed when switching mining & dev fee? its very annoying..lol..
Re: Antminer D3 firmware modification thread (PUBLIC BETA available!)
A BIG thanks to blissz and whoever involved making this works... everyone will be looking forward for the next step..
p/s update.. After running 1hr 35m, 3 HW
p/s update.. After running 1hr 35m, 3 HW
Re: Antminer D3 firmware modification thread (PUBLIC BETA available!)
The best result that I get from new D3 modded firmware is 16.8 GH/s at 840W of power
how to do that plzI have setup 462 with lowest ASIC voltage and fan 30%
My turn to feedback..
I have more or less the same result.. 462/lowest ASIC/16.2Ghs/810W.
Running at 25 minutes with 0 HW. Chip Temp@75/73/77 & PCB Temp 61/57/61. Fan speed percentage NOT set. Fan runinng at 3800 RPM/3900RPM
Compared to Unflashed Nov 19.3Gs..
487/17.2Ghs/1050W
Running at 25 minutes with 0 HW. Chip Temp@77/75/83 & PCB Temp 60/58/64. Fan speed percentage NOT set. Fan runinng at 5250RPM/5100RPM
Re: Antminer D3 firmware modification thread (PUBLIC BETA available!)
Re: Antminer D3 firmware modification thread (voltage & fan mods)
Instructions:
set the miner frequency at 400mhz and set your fan speed at 25% before flashing. After flashing, check the advanced settings page and start at the lowest voltage setting. From there increase your frequency to see how high you can go at the lowest voltage setting.
set the miner frequency at 400mhz and set your fan speed at 25% before flashing. After flashing, check the advanced settings page and start at the lowest voltage setting. From there increase your frequency to see how high you can go at the lowest voltage setting.
the fan is at 25%.. does it means 25% run on initial startup to eliminate the max rpm during startup?
What is the fan speed when at full hashing operation? remain at 25% or increases accordingly to running temperature?
p/s I am from a hot climate country..and running with natural air ventilation without AC
hi.. did you managed to solve the problem?
I am also having the same issue.. and today when I changed it back to static.. the miner somehow hangs and I have to to factory reset.
I am now trying another method. On my router, i set DHCP reserved address corresponding to mac address.
I am also having the same issue.. and today when I changed it back to static.. the miner somehow hangs and I have to to factory reset.
I am now trying another method. On my router, i set DHCP reserved address corresponding to mac address.
With Claymores BTG Miner v12.6, this is error I see in miner txt file, after my screen goes blue and PC restart:
"OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst"
I use 470/480 Crimson Beta 23.Aug and tryed Crimson 17.11.2 and 17.7.2, same problem.
How to fix that Catalyst error? Drivers work well mining eth.
"OC v7, Reset control for GPU 0, close miner right now if you want to use default control from Catalyst"
I use 470/480 Crimson Beta 23.Aug and tryed Crimson 17.11.2 and 17.7.2, same problem.
How to fix that Catalyst error? Drivers work well mining eth.
I had exactly the same.
What is the target hashrate for Sapphire Nitro RX470 4GB for this coin? Currently my settings are good for ETH, getting about 29.3-29.9mh/s
For BTG, it hangs..
Re: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3
Hi.. did anyone here received the shipping invoice with a wrong shipping cost? A few of us here received the invoice with such error.
I have 1 unit that I order at 1599 and shipping cost was 2258.802. That make the total of 3857.802.
A friend of mine who order 2 unit, gets 22k shipping cost...
custom gonna fkk us bigtime with tax then...
I have 1 unit that I order at 1599 and shipping cost was 2258.802. That make the total of 3857.802.
A friend of mine who order 2 unit, gets 22k shipping cost...
custom gonna fkk us bigtime with tax then...