Hello,

I'm looking to sell 196 units of S7-LN (2,7 Th/s) most preferably in bulk. The miners are located in Florida. I am also open to international shipping if it's a good deal.

Bulk Description:

• Total Active Hash Power: 480 Th/s – 500 Th/s.
• 174 Fully operational miners.
• 22 half working miners presenting different issues (fixable).
• Used for 7 months, in good conditions.
• Every unit includes its original package and PSU.

Regarding price, I am open to offers (realistic ones). Feel free to ask anything.

Escrow needed. BTC payment.

Pic from when they were on:
http://imgur.com/tqbtcFj.jpg

I would be interested in buying USB bitcoin miners with efficiency equal or better than 0.3J/GH, and with a sell price of 2.5USD per GH/s or lower.
Can you advance any expected sales date for the "sidehack" announced 700GH/s @ 70W USB miner ??

Still available.

- Apply ticket mask to balance flashing at higher frequencies.

So the good news:

Got 3 of my 4 Compacs cranking steadily and stably at 300MHz.

The bad news:

Yeah - just 3.  One of them zombied out.  I would just figure I killed it, but if I fiddle with the voltage, it will catch low GH's but then degrade to MH's and eventually zombie out again.  But most of the time it won't hash.

Also, when I plug into the hub I don't get the nice little Win10 sound.  Doesn't matter which port in the hub or if it's by itself or not, so it's not the hub (https://www.amazon.com/gp/product/B00VDVCQ84/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1).

I even scaled back the power and clocks to 275MHz.  Still the same.  When I plug straight into a USB port in my PC tower, it DOES make the Win10 chime, but still doesn't try to hash.

Any advice - or is prolly fried?

Thanks all!

Hi sidehack,  sorry for the noob question but would this usb miner be able to take advantage of a usb3.1 port 900mA?
If its plugged it into a 3.1 usb port?  Thank you for your hard work.

My attempt at upping the power to my soon to be arriving 2pacs on the cheap. I'm reusing stuff I already had on hand.  I am waiting on my Block Erupters to sell on eBay to reclaim a 5v 40 amp led "meanwell" power supply. My plan is to use Monoprice usb extenders and some 18GA wire to hook up the power of the meanwell and data of a cheap 10 port hub (also hooked up to the meanwell) I hope to get these guys running at 3 to 3.5 amps per.

I slice the jacket and remove the red and black wire (verifying that they are the +5 and ground on the usb ports) Cut the red wire and cap the side coming from the usb hub. Solder in the new 18GA wire +5 and ground cables. Verify no shorts and wrap the solder joints on opposite sides of the usb cable.

http://i.imgur.com/fMiqMC5.png

http://i.imgur.com/HFSVzpa.png

I cut some 3/4 wood dowel and using a saw and 1/2 drill bit made usb "Holders" they are spaced 2" apart to allow cooling.
I plan on attaching these to the board that my power supply is mounted to and using hot glue attaching the usb "holders" to the wood dowel.
And then attaching cooling fans.
Will Post more pictures when I get it completed. Just wanted to throw this out in case it helps others.

Yours are going out today.

thanks...cute..., however, you will be cooling mostly the hub, not the sticks themselves with this setup as they will protrude much higher than the fan plane.

I came in over the weekend and got a bunch more sticks tested. Also tested out a new assembly procedure that should pick up the overall pace, which is definitely a good thing.

Anyways I have to go by the post office today anyway so I'm shipping out the next small orders. This makes the first 8 small orders, total of 47 sticks, shipped by day's end. The next 200 will be stashed for the first large order. By end of next week I should have that first large order done and be tearing into the next however many small orders. I'll have to retool for bitshopper sticks before long, so that'll slow up the domestic-order pace a bit.

I made the mistake of buying the AntRouter without digging to see if it was a good product. Now I'm stuck mining on SOLO, does anyone know how to get it off SOLO or change the firmware to get it to mine differently?

No pics at the moment, but I currently have this Anker USB 3.0 hub:
https://www.amazon.com/gp/product/B00EYXZI4M/

Works fine, but won't work with RPi, I would like to switch over to a different hub that I can run on the RPi. I currently have four compacs running at 275mhz and I have two 2Pacs ordered.

I was thinking of getting this:
https://www.amazon.com/Superbpag-Portable-Charger-Transfer-Samsung/dp/B013OK10YM

Hoping to find something to work with the RPi and be able to provide enough power for the 4 compacs and 2 2Pacs. Hoping to crank these things up 300+mhz.

You have active or passiv cooling?

i want to purchase 2 TH/s
how much bitcoin get? in week or month or year

hope you can help me!