I tried it out and i was not able to run a single one. The stick is recognized but restart a lot. It guess because of missing power. In general i had issues to run the stick on USB2.0. Any USB 3.0 was smooth out of the box.

Please go to you shell and execute "lsusb" with connected and aktiv hub and past the output here.

Did you do in the setup the following commands?

sudo apt-get update
sudo apt.get upgrade
sudo rpi-update


Thanks

What HUB you use? What show lsusb on you raspberry ?

I had the issue that the plug was not put is tight to the hub. 

Hi, for 2 days now. Will see if i could tweak a bit. But 50 watt are quite a lot. I additionally run shortly 852 but one of the miner got 15% Error rate.

https://i.imgur.com/Bpik0oL.png

Sure.

For not it is more or less not finished it will be looking like this until i have an idea how to fix.

The setup was quite easy. Raspian default installation. Update OS and the PI. Take the arm bfgminer and start running. Nothing special.


https://i.imgur.com/cbrGqbp.jpg

https://i.imgur.com/NAexPhD.jpg

I got a TP-Link UH720 and Raspberry PI 3 (Raspian) and ran 4 Moonlander 2 on them. They run at standard core voltage @ 796 MHZ so about 4,5 MH per Moonlander. The power consumption for the hole setup is 50 watts.

I had this to. The power from the USB port was not enough.