what happened everything just vanished

Very fast ping
PING bci.altpool.pro (54.38.69.44) 56(84) bytes of data.

64 bytes from ns3110873.ip-54-38-69.eu (54.38.69.44): icmp_seq=1 ttl=56 time=3.45 ms
64 bytes from ns3110873.ip-54-38-69.eu (54.38.69.44): icmp_seq=2 ttl=56 time=3.48 ms
64 bytes from ns3110873.ip-54-38-69.eu (54.38.69.44): icmp_seq=3 ttl=56 time=3.58 ms
64 bytes from ns3110873.ip-54-38-69.eu (54.38.69.44): icmp_seq=4 ttl=56 time=3.49 ms
64 bytes from ns3110873.ip-54-38-69.eu (54.38.69.44): icmp_seq=5 ttl=56 time=3.55 ms
64 bytes from ns3110873.ip-54-38-69.eu (54.38.69.44): icmp_seq=6 ttl=56 time=3.45 ms

CryptoDredge 0.9.5      -- for LUX -              what would be the settings for 4x 1070, 1x10606g and 2x1050ti gpus for CryptoDredge miner I am running power 70%  100core   and 0mem at - 3 now it seems better so far, is there a better setting for the overclock?
CryptoDredge 0.9.5
the miner seems to restart a lot
not reboot
is it something to do with the 0 to 6 settings
intensity

0.9.5 starts repeatedly all the time at - 6

I have everything entered then I am stuck at this Part:::
Add your rigs
Next stop is to add your rigs. Go to ‘Edit’->’Add new rig…’. Now the dialog to add an IP/port pair shows up. Enter the information to allow the control software to connect with the miner-rig. If you run the Miner and the MinerControl on the same box you can use the loopback address (127.0.0.1) and the default port 8010 if that is OK for you. Otherwise, enter the IP of the rig.

Hi I can't get the GUI miner for Windows OS and Nvidia GPU working, but I am using the bat file to run the miner and it is faster than the
_progpowminer-cuda-windows-0.16_final_ with the same setting that I had was 64.4 MHs and now it is 67.36 MHs using the  --cuda-block-size 320   added to the line

I don't have AMDs but here it what I have learned so far and you might try the power setting on the AMDs.

So here goes How do you edit the part of the line ( stratum+tcp://bci.suprnova.cc:9166 ) to have add --cuda-block-size 320
to your startup command - just add --cuda-block-size 320 to it
after stratum
last thing on the line

I have 4 GTX 1070, 1 1060 6g and 2 1050tis

so far I have found out

Settings for 1070

power up, core up, mem lower

and add --cuda-block-size 320    - I don't know how to do this, Its all new to me
to your startup command

you will get around 12mh on your 1070
with around 130w

I get 10MHs and want to add the new command  of add --cuda-block-size 320
to your startup command - just add --cuda-block-size 320 to it
after stratum

Thanks for your help, that's what I needed to do!

SimpleMining OS
So far I have managed it to boot from USB and starts to mine with SimpleMining OS– it starts mining and it gets stuck and keeps saying " A valid address is needed" then starts mining again- not sure what this means and what address they want and where to put it.
thanks for any help, this is my 1st rig