Anyone got H/s for R9 390?

I am away from home and cant test it right now.

Swap risers around, then see if any of them is faulty.
It could also mean too high clock/mem oc.

Ofc before any of that do obligatory driver reinstall with DDU.

If none of that fails, try heavy underclock of the card in question. Then increase the clock bit by bit.
I had that message showing, and after a couple of hours of testing I found out my GPU was faulty. It was stable only when I downclocked heavily.
My r9 390x has stock clock of 1080, but I had to downclock to 990 to get any kind of stability. Ended up RMA-ing it, since it crashed every 5 minutes at stock speeds.

Hope this helps.

MSI R9 390X
connected directly on pcie 16 slot, undeclocked, overvolted. Only below 1000 MHz (1080 stock) and over +35 mV i get any kind of stability (hour or two)

Keep getting GPU 1 hangs in OpenCL call error.
Windows says "Default Radeon WattMan settings have been restored due to unexpected system failure".

Current drivers 17.1.1, this hapened with 15.12 too.

Furmark QHD + 4x MSAA crashes when reaches around 40% of the test.


Is this card candidate for rma?
Anyone had anything similar happen?

Rest of the rig works fine no matter the driver version.

Need help.

Pozdrav iz ZG, tu sam skoro godinu, tek sad vidim da postoji ovaj podforum.
Sklepao jedan rig u podrumu da si zaradim za cugu/drogu/kurve/janjetinu.

Malo sitno trejdam, ali nemam nekog velikog uspjeha. Onako samo da malo podignem zaradu iz rudnika.

Anyone tried mining with AMD FirePro W4300 4GB
How much Sol/s?

Where is DAG file stored on windows 10?
It is not in "C:\Users\___\AppData\Local"

There is no "ethash" folder there. I have "show hidden files and folders" option selected.

It is.
MSI 390 @1135/1500 gives 415 H/s
MSI 390X @same gives 425 H/s

Both stock bios, wattage not measured.

Anyone using modded bios on R9 390? Hynix

Can anyone report their H/s for
R9 290
R9 290X

After I moved one (Sapphire) of my 2 cards from "normal" pcie x16 slot to riser I get 15 H/s less on average on that card.

Also I switched my monitor from Sapphire to MSI.

Second card (MSI) which was always on riser stayed the same.

I have those blue usb 3 risers, could this be an riser issue? Or something else?

(v12.1, 15.12, oc settings same as before)

thx for info 

I get
401 H/s Sapphire 1110/1500
405 H/s MSI 1125/1500
no mod, CM ver 12.1

According to whattomine, eth is a bit more profitable right now, by however slight margin...

How much H/s could I get with r9 390?
With what setting core/mem clocks?

I am currently keeping them on ZEC, but plan to switch if more profitable.

Can someone give me link to 15.12 drivers, cant find them online. AMD page is super not user friendly when searching for old drivers. thx

Also what drivers give best results for R9 390s?

I like them stable and it is located at a huge facility so I dont pay for power.

How to enable log option?

Cheers, you fine handsome lads

I am getting a lot of miner thread hangs.
Then miner restarts only when I press 's'. Otherwise both of my 390 remain idle.

What could be the problem?

Is new 17.1 driver any better?

How much H/s for R9 290/ 290X?

Also, anyone mining with radeon pro duo?

R9 390 1120/1500, stock bios ~340 H/s

Thx claymore, much better than v10.

Getting a lot of "low lifficulty shares" warnings...

I use r9 390.
start.bat:

SETX GPU_MAX_ALLOC_PERCENT 100
SETX GPU_USE_SYNC_OBJECTS 1
SETX GPU_FORCE_64BIT_PTR 1

optiminer  -s zec-eu.suprnova.cc:2142 -u login.worker -p mypw

pause

Pool registers 0 H/s.

What am I doing wrong?

Can someone tell me average H/s for 380 and 380X?

Noob question, but how to under/over volt cards?
Do I write eg. 1100 (mV)  or -50 (mV).
Can you give me and example?
Also what value to set? My MSI & sapphire R9 390 show approx.  1100 to 1150 mV on afterburner.

Btw current config:
MSI R9 390 1110/1500, ~290 sol @ 76 deg
Sapphire 390 1100/1500,  ~290 sol @ 78 deg

Is there room for improvment?
Thx, sry for noob question

Claymore keep up the good work mate!