Search content
Sort by
Showing 20 of 32 results by ordenadoresatm
Re: [ANN][POOL] ipoMiner - Profitable multipool targeting new coins + merged mining!
Hi,
are you sure DOGE merged mining is working fine? Till 12 hours ago I was mining in another merged pool and I was getting up to 1000 Dodges everyday. Now I got 15 in 12 hours with the same 11 Mhs.
The rest of merged coins seems to have a similar incoming rate.
are you sure DOGE merged mining is working fine? Till 12 hours ago I was mining in another merged pool and I was getting up to 1000 Dodges everyday. Now I got 15 in 12 hours with the same 11 Mhs.
The rest of merged coins seems to have a similar incoming rate.
Yes, DOGE merged mining is working fine. We simply don't have a lot of scrypt hashrate relative to the difficulty of mining Dogecoin. DOGE difficulty has been averaging around 12-14k for the past few days, making it 4-5x more difficult to find blocks on than the other merged mineable coins like SYS, PTC, and ULTC.
With 500-1000Mh of scrypt hashrate, you would expect to find between 0.66-1.3 DOGE blocks per day, which means there will be a lot of variation in DOGE blocks at our hashrate levels. Its entirely possible to see multiple blocks in a single day, or zero for a week or more, depending on block finding variance.
The block reward on DOGE was also just cut in half to 31,250 per block.
Oh, I didn't know the reward had just been reduced. Anyway in the long run, both pools should give the same amount of doge. Let's wait.
Thanks.
Re: [ANN][POOL] ipoMiner - Profitable multipool targeting new coins + merged mining!
Hi,
are you sure DOGE merged mining is working fine? Till 12 hours ago I was mining in another merged pool and I was getting up to 1000 Dodges everyday. Now I got 15 in 12 hours with the same 11 Mhs.
The rest of merged coins seems to have a similar incoming rate.
are you sure DOGE merged mining is working fine? Till 12 hours ago I was mining in another merged pool and I was getting up to 1000 Dodges everyday. Now I got 15 in 12 hours with the same 11 Mhs.
The rest of merged coins seems to have a similar incoming rate.
Re: [ANN][MID]MidasCoin|New Scrypt PoM|Backed Value|ATM card|Referral|NO IPO|UNIQUE
Look guys, do yourself a favour and stop mining. I have seen this too many times before. Where is the Dev?? I will say this once and only once. Whats the worst that could happen, you all stop mining and what, has any new altcoin really taken off bigtime, No they haven't. The coin won't have any value anyway if noone wants it. There will always be miners mining as the scammers probably setup machines to mine so everyone else follows. Come on.. Look at the picture go back to mining legit coins like litecoin, dogecoin etc. And then wait and see. After All there is no wallet, the site has errors. How professional does this set up look. It doesnt. they are scammers through and through.
Probably behind all the other scams. just that they think they are getting better, but in fact getting more greedy.
I am mining litecoins through a miltipool. working great for me and i am happy for now.
If i am right on this one, promise me you will listen on the next scam coin. I hate seeing people being cheated and the cheats getting away with it. Of course there is no pre mine or IPO, its a fast way for the scammers to make money, they are probably already laughing now.
Probably behind all the other scams. just that they think they are getting better, but in fact getting more greedy.
I am mining litecoins through a miltipool. working great for me and i am happy for now.
If i am right on this one, promise me you will listen on the next scam coin. I hate seeing people being cheated and the cheats getting away with it. Of course there is no pre mine or IPO, its a fast way for the scammers to make money, they are probably already laughing now.
If you are mining Litecoin, you should try http://give-me-coins.com/. Merged mining Litecoin, Syscoin, UmbrellaCoin and Pesetacoin. And soon Dogecoin too. ULTC and PTC are not too valuable, but I am getting some syscoin that could be interesting...
Re: [ANN][MID]MidasCoin|New Scrypt PoM|Backed Value|ATM card|Referral|NO IPO|UNIQUE
Wallet source link does not work on the website. Either the linux one. So I cannot install the wallet.
The source wallet should be the first to be available, so I cannot understand Why it is not published yet.
The source wallet should be the first to be available, so I cannot understand Why it is not published yet.
Because you can't move coins! More than 120 blocks have been mined and coins aren't mature yet, and they should be after 120 blocks!
Why the hell do you need a wallet for?
It doesn't smell good. I stopped mining one hour ago.
Re: [ANN][MID]MidasCoin|New Scrypt PoM|Backed Value|ATM card|Referral|NO IPO|UNIQUE
Wallet source link does not work on the website. Either the linux one. So I cannot install the wallet.
The source wallet should be the first to be available, so I cannot understand Why it is not published yet.
The source wallet should be the first to be available, so I cannot understand Why it is not published yet.
Re: [ANN] Bittrex - Next generation exchange (btc/ltc/eac/ppc/rdd/ftc/and more)
Hi,
When I try to send a market order through Bittrex API I receive the message "Market order disabled", but my API Keys have market orders enabled. Does anyone know if market orders are forbidden for all users or it is a problem with my API Keys?
Thanks!
When I try to send a market order through Bittrex API I receive the message "Market order disabled", but my API Keys have market orders enabled. Does anyone know if market orders are forbidden for all users or it is a problem with my API Keys?
Thanks!
Re: [ANN] EntropyCoin [ENC] Scrypt-N - Mandatory Wallet Update
minep.it is mining on the wrong fork yet:
https://www.minep.it/pool/ENC/
And the net hash on the wrong fork is 31 Mhs! So there are more people wasting time and money because of this not serious coin. I have lost 300 ENC because of that.
http://enc.42tx.com/address/EWAAiKTyWMx99C2KSW3T1jAw9Bney31M3e
https://www.minep.it/pool/ENC/
And the net hash on the wrong fork is 31 Mhs! So there are more people wasting time and money because of this not serious coin. I have lost 300 ENC because of that.
http://enc.42tx.com/address/EWAAiKTyWMx99C2KSW3T1jAw9Bney31M3e
Hello,
I received today an antminer S1. Luckily first of all I configured the pools to mine through the web and after that I tried to change the IP from the net menu. I saved the changes and rebooted the system.
But the IP didn't change (192.168.1.99) and, the worst, now all ports are closed! (I scanned all of them and they are filtered) and I cannot access to the antminer.
At least it is minning right.
Any idea? How can I disable the antminer firewall?
Thank you.
I found this: https://bitcointalk.org/index.php?topic=452254.0I received today an antminer S1. Luckily first of all I configured the pools to mine through the web and after that I tried to change the IP from the net menu. I saved the changes and rebooted the system.
But the IP didn't change (192.168.1.99) and, the worst, now all ports are closed! (I scanned all of them and they are filtered) and I cannot access to the antminer.
At least it is minning right.
Any idea? How can I disable the antminer firewall?
Thank you.
It should work. I answer myself in case somebody else have the same problem.
Hello,
I received today an antminer S1. Luckily first of all I configured the pools to mine through the web and after that I tried to change the IP from the net menu. I saved the changes and rebooted the system.
But the IP didn't change (192.168.1.99) and, the worst, now all ports are closed! (I scanned all of them and they are filtered) and I cannot access to the antminer.
At least it is minning right.
Any idea? How can I disable the antminer firewall?
Thank you.
I received today an antminer S1. Luckily first of all I configured the pools to mine through the web and after that I tried to change the IP from the net menu. I saved the changes and rebooted the system.
But the IP didn't change (192.168.1.99) and, the worst, now all ports are closed! (I scanned all of them and they are filtered) and I cannot access to the antminer.
At least it is minning right.
Any idea? How can I disable the antminer firewall?
Thank you.
Re: [ANN] KRAKEN.COM - Exchange Now Open with USD, EUR, BTC, LTC, XRP, NMC, XDG
Hello,
I promise I have read the Help several times, but I cannot set Leverage orders. I see at the Overview that I have Free margin but all Leverage buttons are disabled except for the None one.
What am I doing wrong?
Thank you.
the last info was, that it is not enabled yet:I promise I have read the Help several times, but I cannot set Leverage orders. I see at the Overview that I have Free margin but all Leverage buttons are disabled except for the None one.
What am I doing wrong?
Thank you.
https://bitcointalk.org/index.php?topic=290799.msg5487383;topicseen#msg5487383
Oh, Thank you. It should be explained on the Kraken web because I have spent a long time looking for the solution (I should have asked before... ;-) )If it is, I did not find it...
Re: [ANN][QBC] Québecoin - X11 - DGW - (BITTREX) - Win/Mac/Linux Wallets - New
https://qbc.nicemining.pw/ seems to be offline. It's the only pool I found where people were mining Quebecoins that is not SuchPool. Anyone knows anything about it?
https://www.minep.it/pool/QBC/
Although there is nobody mining there right now. The server is in Paris. It is good for European people.
Re: [ANN] KRAKEN.COM - Exchange Now Open with USD, EUR, BTC, LTC, XRP, NMC, XDG
Hello,
I promise I have read the Help several times, but I cannot set Leverage orders. I see at the Overview that I have Free margin but all Leverage buttons are disabled except for the None one.
What am I doing wrong?
Thank you.
I promise I have read the Help several times, but I cannot set Leverage orders. I see at the Overview that I have Free margin but all Leverage buttons are disabled except for the None one.
What am I doing wrong?
Thank you.
Re: [ANN] KRAKEN.COM - Exchange Now Open with USD, EUR, BTC, LTC, XRP, NMC, XDG
Hi,
one easy question. I know there are different monthly and daily withdraw and refund limits. But Is there any monthly or daily trade limit? I searched the Help but I do not have clear yet.
Thank you.
No there is no trade limit one easy question. I know there are different monthly and daily withdraw and refund limits. But Is there any monthly or daily trade limit? I searched the Help but I do not have clear yet.
Thank you.
Re: [ANN] KRAKEN.COM - Exchange Now Open with USD, EUR, BTC, LTC, XRP, NMC, XDG
Hi,
one easy question. I know there are different monthly and daily withdraw and refund limits. But Is there any monthly or daily trade limit? I searched the Help but I do not have clear yet.
Thank you.
one easy question. I know there are different monthly and daily withdraw and refund limits. But Is there any monthly or daily trade limit? I searched the Help but I do not have clear yet.
Thank you.
Re: [ANN] YAMASHITACOIN [YMC] X11 POW 2WEEKS/POS 10% ON BITTREX! DIG DIG TREASURE!
What fucking bullshit is it? It happened the same with this pool and purecoin. Everything went on fine till I tried to withdraw my coins. They did not arrived to my wallet. Last time I waste a second of my time with shitcoins and not reliable (or scam?) pools. I sent a message yesterday to the pool webmaster but no answer so far...
http://ymc.hashhot.com/
YMC suddenly changed node, pool appear fork, not can payout, Please stop mining. the wallet is not can normal run. close pool
YMC这个烂日本币，突然改了节点，池子出现分叉，之前挖很多都是孤块，无法支付了，请停止开采，现在他的钱包都无法启动了。烂币不开了，准备关池子)
http://ymc.hashhot.com/
YMC suddenly changed node, pool appear fork, not can payout, Please stop mining. the wallet is not can normal run. close pool
YMC这个烂日本币，突然改了节点，池子出现分叉，之前挖很多都是孤块，无法支付了，请停止开采，现在他的钱包都无法启动了。烂币不开了，准备关池子)
Re: [GUIDE] GridSeed 5-Chip USB & Blade Miner Support/Tuning
Please, can anybody help me?
I tried a lot of versions of cpuminer and cgminer with Gridseed support, windows and linux (bamt, debian based). And the result is always the same. The blades seems to be working but they do not submit work to the pools.
This is my last try with cgminer (It is :
cgminer version 3.7.2 - Started: [2014-05-25 22:27:20]
--------------------------------------------------------------------------------
(5s):10.91M (avg):10.86Mh/s | A:0 R:0 HW:0 WU:0.0/m
ST: 2 SS: 0 NB: 11 LW: 90 GF: 0 RF: 0
Connected to myre[Suspicious link removed]t2pools.com diff 16 with stratum as user ordenadoresatm.gblade
Block: e5ea9547... Diff:26 Started: [22:31:10] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [ S ]ettings [D]isplay options [Q]uit
GSD 0: 48F0744E3135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 1: 48E570503135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 2: 48D778623137 800 MHz | 2.715M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 3: 48D452543137 800 MHz | 2.713M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------
[2014-05-25 22:27:18] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:18] System reseting
[2014-05-25 22:27:18] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] GridSeed options: 'baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0'
[2014-05-25 22:27:19] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:19] System reseting
[2014-05-25 22:27:19] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] Probing for an alive pool
[2014-05-25 22:27:19] Pool 1 difficulty changed to 16
[2014-05-25 22:27:19] Switching to pool 1 stratum+tcp://doge.minep.it:3332 - first alive pool
[2014-05-25 22:27:19] Pool 0 difficulty changed to 16
[2014-05-25 22:27:19] Pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030 alive, testing stability
[2014-05-25 22:27:19] Switching to pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030
[2014-05-25 22:27:20] Pool 2 difficulty changed to 16
[2014-05-25 22:27:20] Network diff set to 26
[2014-05-25 22:27:46] Network diff set to 26
[2014-05-25 22:27:46] Stratum from pool 0 detected new block
[2014-05-25 22:27:51] Network diff set to 572
[2014-05-25 22:27:51] Stratum from pool 1 detected new block
[2014-05-25 22:27:57] Network diff set to 26
[2014-05-25 22:27:57] Stratum from pool 0 detected new block
[2014-05-25 22:28:23] Network diff set to 26
[2014-05-25 22:28:23] Stratum from pool 0 detected new block
[2014-05-25 22:29:34] Network diff set to 26
The conf file:
And the script calling cgminer:
Please, ant idea? If I buy a Raspberry Pi Would it work?
Thank you
I tried a lot of versions of cpuminer and cgminer with Gridseed support, windows and linux (bamt, debian based). And the result is always the same. The blades seems to be working but they do not submit work to the pools.
This is my last try with cgminer (It is :
Quote
cgminer version 3.7.2 - Started: [2014-05-25 22:27:20]
--------------------------------------------------------------------------------
(5s):10.91M (avg):10.86Mh/s | A:0 R:0 HW:0 WU:0.0/m
ST: 2 SS: 0 NB: 11 LW: 90 GF: 0 RF: 0
Connected to myre[Suspicious link removed]t2pools.com diff 16 with stratum as user ordenadoresatm.gblade
Block: e5ea9547... Diff:26 Started: [22:31:10] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [ S ]ettings [D]isplay options [Q]uit
GSD 0: 48F0744E3135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 1: 48E570503135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 2: 48D778623137 800 MHz | 2.715M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 3: 48D452543137 800 MHz | 2.713M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------
[2014-05-25 22:27:18] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:18] System reseting
[2014-05-25 22:27:18] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] GridSeed options: 'baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0'
[2014-05-25 22:27:19] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:19] System reseting
[2014-05-25 22:27:19] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] Probing for an alive pool
[2014-05-25 22:27:19] Pool 1 difficulty changed to 16
[2014-05-25 22:27:19] Switching to pool 1 stratum+tcp://doge.minep.it:3332 - first alive pool
[2014-05-25 22:27:19] Pool 0 difficulty changed to 16
[2014-05-25 22:27:19] Pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030 alive, testing stability
[2014-05-25 22:27:19] Switching to pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030
[2014-05-25 22:27:20] Pool 2 difficulty changed to 16
[2014-05-25 22:27:20] Network diff set to 26
[2014-05-25 22:27:46] Network diff set to 26
[2014-05-25 22:27:46] Stratum from pool 0 detected new block
[2014-05-25 22:27:51] Network diff set to 572
[2014-05-25 22:27:51] Stratum from pool 1 detected new block
[2014-05-25 22:27:57] Network diff set to 26
[2014-05-25 22:27:57] Stratum from pool 0 detected new block
[2014-05-25 22:28:23] Network diff set to 26
[2014-05-25 22:28:23] Stratum from pool 0 detected new block
[2014-05-25 22:29:34] Network diff set to 26
The conf file:
Quote
{
"pools" : [
{
"url" : "stratum+tcp://myre[Suspicious link removed]t2pools.com:6030",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
},
{
"url" : "stratum+tcp://doge.minep.it:3332",
"user" : "ordenadoresatm.gblade",
"pass" : "x"
},
{
"url" : "stratum+tcp://doge.ghash.io:3333",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"gridseed-options" : "baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0"
}
"pools" : [
{
"url" : "stratum+tcp://myre[Suspicious link removed]t2pools.com:6030",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
},
{
"url" : "stratum+tcp://doge.minep.it:3332",
"user" : "ordenadoresatm.gblade",
"pass" : "x"
},
{
"url" : "stratum+tcp://doge.ghash.io:3333",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"gridseed-options" : "baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0"
}
And the script calling cgminer:
Quote
/opt/miners/cgminer-gc3355/cgminer --usb 1:7,1:8,2:2,2:3 --config /etc/bamt/cgminerGblade.conf
Please, ant idea? If I buy a Raspberry Pi Would it work?
Thank you
I am running cgminer on Windows 7 - 64 bit with no problems ...
I am trying to KISS ...like simple .bat file ...:
"cgminer.exe --scrypt -o stratum+tcp://usa.wemineltc.com:3336 -u your_worker_name -p your_pass
--gridseed-options=baud=230400 --gridseed-options per_chip_stats=1,freq=838,chips=40 --hotplug 5"
Hope it helps...
ZiG
Thank you for your answer. I tried starting like you, but the same, 10.92 Mhs but WU:0.0 and no submissions to the pool.
Re: [GUIDE] GridSeed 5-Chip USB & Blade Miner Support/Tuning
This is the my cpuminer:
This is how I call the scrypt:
/opt/miners/cpuminer-gc3355/minerd -F 800 -G /dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -o stratum+tcp://stratum.eminer.pl:3341 -u ordenadoresatm.gridseed -p grid
Pool does not show even the worker connected.
Quote
cpuminer-gc3355 (v1.0e) - Started: [2014-05-25 22:47:27]
====================================================================================================================================================================================
(2s) | 0.00/0.00 MH/s | A: 0 R: 0 HW: 0
Connected to stratum.eminer.pl:3341 diff 1 with stratum as user ordenadoresatm.gridseed
====================================================================================================================================================================================
GSD 0: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 1: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 2: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 3: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
====================================================================================================================================================================================
[2014-05-25 22:47:27] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:27] 0: Open device /dev/ttyACM0
[2014-05-25 22:47:27] 0: failed open device /dev/ttyACM0
[2014-05-25 22:47:27] 0: Terminating GC3355 chip mining thread
[2014-05-25 22:47:27] Starting Stratum on stratum+tcp://stratum.eminer.pl:3341
[2014-05-25 22:47:28] 1: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:28] 1: Open device /dev/ttyACM1
[2014-05-25 22:47:28] 1: failed open device /dev/ttyACM1
[2014-05-25 22:47:28] 1: Terminating GC3355 chip mining thread
[2014-05-25 22:47:28] 2: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:28] 2: Open device /dev/ttyACM2
[2014-05-25 22:47:28] 2: failed open device /dev/ttyACM2
[2014-05-25 22:47:28] 2: Terminating GC3355 chip mining thread
[2014-05-25 22:47:28] 3: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:28] 3: Open device /dev/ttyACM3
[2014-05-25 22:47:28] 3: failed open device /dev/ttyACM3
[2014-05-25 22:47:28] 3: Terminating GC3355 chip mining thread
[2014-05-25 22:47:28] API: Bind failed
[2014-05-25 22:47:28] Stratum detected new block
[2014-05-25 22:47:28] New Job_id: 34cd Diff: 1 Work_id: 7300beb2
[2014-05-25 22:47:35] Stratum detected new block
[2014-05-25 22:47:35] New Job_id: 138b Diff: 1 Work_id: 7307e8df
====================================================================================================================================================================================
(2s) | 0.00/0.00 MH/s | A: 0 R: 0 HW: 0
Connected to stratum.eminer.pl:3341 diff 1 with stratum as user ordenadoresatm.gridseed
====================================================================================================================================================================================
GSD 0: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 1: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 2: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
GSD 3: | 0 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0
====================================================================================================================================================================================
[2014-05-25 22:47:27] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:27] 0: Open device /dev/ttyACM0
[2014-05-25 22:47:27] 0: failed open device /dev/ttyACM0
[2014-05-25 22:47:27] 0: Terminating GC3355 chip mining thread
[2014-05-25 22:47:27] Starting Stratum on stratum+tcp://stratum.eminer.pl:3341
[2014-05-25 22:47:28] 1: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:28] 1: Open device /dev/ttyACM1
[2014-05-25 22:47:28] 1: failed open device /dev/ttyACM1
[2014-05-25 22:47:28] 1: Terminating GC3355 chip mining thread
[2014-05-25 22:47:28] 2: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:28] 2: Open device /dev/ttyACM2
[2014-05-25 22:47:28] 2: failed open device /dev/ttyACM2
[2014-05-25 22:47:28] 2: Terminating GC3355 chip mining thread
[2014-05-25 22:47:28] 3: GC3355 chip mining thread started, in SINGLE mode
[2014-05-25 22:47:28] 3: Open device /dev/ttyACM3
[2014-05-25 22:47:28] 3: failed open device /dev/ttyACM3
[2014-05-25 22:47:28] 3: Terminating GC3355 chip mining thread
[2014-05-25 22:47:28] API: Bind failed
[2014-05-25 22:47:28] Stratum detected new block
[2014-05-25 22:47:28] New Job_id: 34cd Diff: 1 Work_id: 7300beb2
[2014-05-25 22:47:35] Stratum detected new block
[2014-05-25 22:47:35] New Job_id: 138b Diff: 1 Work_id: 7307e8df
This is how I call the scrypt:
/opt/miners/cpuminer-gc3355/minerd -F 800 -G /dev/ttyACM0,/dev/ttyACM1,/dev/ttyACM2,/dev/ttyACM3 -o stratum+tcp://stratum.eminer.pl:3341 -u ordenadoresatm.gridseed -p grid
Pool does not show even the worker connected.
Re: [GUIDE] GridSeed 5-Chip USB & Blade Miner Support/Tuning
Please, can anybody help me?
I tried a lot of versions of cpuminer and cgminer with Gridseed support, windows and linux (bamt, debian based). And the result is always the same. The blades seems to be working but they do not submit work to the pools.
This is my last try with cgminer (It is :
cgminer version 3.7.2 - Started: [2014-05-25 22:27:20]
--------------------------------------------------------------------------------
(5s):10.91M (avg):10.86Mh/s | A:0 R:0 HW:0 WU:0.0/m
ST: 2 SS: 0 NB: 11 LW: 90 GF: 0 RF: 0
Connected to myre[Suspicious link removed]t2pools.com diff 16 with stratum as user ordenadoresatm.gblade
Block: e5ea9547... Diff:26 Started: [22:31:10] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [ S ]ettings [D]isplay options [Q]uit
GSD 0: 48F0744E3135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 1: 48E570503135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 2: 48D778623137 800 MHz | 2.715M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 3: 48D452543137 800 MHz | 2.713M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------
[2014-05-25 22:27:18] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:18] System reseting
[2014-05-25 22:27:18] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] GridSeed options: 'baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0'
[2014-05-25 22:27:19] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:19] System reseting
[2014-05-25 22:27:19] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] Probing for an alive pool
[2014-05-25 22:27:19] Pool 1 difficulty changed to 16
[2014-05-25 22:27:19] Switching to pool 1 stratum+tcp://doge.minep.it:3332 - first alive pool
[2014-05-25 22:27:19] Pool 0 difficulty changed to 16
[2014-05-25 22:27:19] Pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030 alive, testing stability
[2014-05-25 22:27:19] Switching to pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030
[2014-05-25 22:27:20] Pool 2 difficulty changed to 16
[2014-05-25 22:27:20] Network diff set to 26
[2014-05-25 22:27:46] Network diff set to 26
[2014-05-25 22:27:46] Stratum from pool 0 detected new block
[2014-05-25 22:27:51] Network diff set to 572
[2014-05-25 22:27:51] Stratum from pool 1 detected new block
[2014-05-25 22:27:57] Network diff set to 26
[2014-05-25 22:27:57] Stratum from pool 0 detected new block
[2014-05-25 22:28:23] Network diff set to 26
[2014-05-25 22:28:23] Stratum from pool 0 detected new block
[2014-05-25 22:29:34] Network diff set to 26
The conf file:
And the script calling cgminer:
Please, ant idea? If I buy a Raspberry Pi Would it work?
Thank you
I tried a lot of versions of cpuminer and cgminer with Gridseed support, windows and linux (bamt, debian based). And the result is always the same. The blades seems to be working but they do not submit work to the pools.
This is my last try with cgminer (It is :
Quote
cgminer version 3.7.2 - Started: [2014-05-25 22:27:20]
--------------------------------------------------------------------------------
(5s):10.91M (avg):10.86Mh/s | A:0 R:0 HW:0 WU:0.0/m
ST: 2 SS: 0 NB: 11 LW: 90 GF: 0 RF: 0
Connected to myre[Suspicious link removed]t2pools.com diff 16 with stratum as user ordenadoresatm.gblade
Block: e5ea9547... Diff:26 Started: [22:31:10] Best share: 0
--------------------------------------------------------------------------------
[P]ool management [ S ]ettings [D]isplay options [Q]uit
GSD 0: 48F0744E3135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 1: 48E570503135 800 MHz | 2.719M/2.750Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 2: 48D778623137 800 MHz | 2.715M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
GSD 3: 48D452543137 800 MHz | 2.713M/2.746Mh/s | A:0 R:0 HW:0 WU:0.0/m
--------------------------------------------------------------------------------
[2014-05-25 22:27:18] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:18] System reseting
[2014-05-25 22:27:18] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] GridSeed options: 'baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0'
[2014-05-25 22:27:19] Device found, firmware version 02140317, driver version v3.8.5.20140210.02
[2014-05-25 22:27:19] System reseting
[2014-05-25 22:27:19] Set GC3355 core frequency to 800 MHz
[2014-05-25 22:27:19] Probing for an alive pool
[2014-05-25 22:27:19] Pool 1 difficulty changed to 16
[2014-05-25 22:27:19] Switching to pool 1 stratum+tcp://doge.minep.it:3332 - first alive pool
[2014-05-25 22:27:19] Pool 0 difficulty changed to 16
[2014-05-25 22:27:19] Pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030 alive, testing stability
[2014-05-25 22:27:19] Switching to pool 0 stratum+tcp://myre[Suspicious link removed]t2pools.com:6030
[2014-05-25 22:27:20] Pool 2 difficulty changed to 16
[2014-05-25 22:27:20] Network diff set to 26
[2014-05-25 22:27:46] Network diff set to 26
[2014-05-25 22:27:46] Stratum from pool 0 detected new block
[2014-05-25 22:27:51] Network diff set to 572
[2014-05-25 22:27:51] Stratum from pool 1 detected new block
[2014-05-25 22:27:57] Network diff set to 26
[2014-05-25 22:27:57] Stratum from pool 0 detected new block
[2014-05-25 22:28:23] Network diff set to 26
[2014-05-25 22:28:23] Stratum from pool 0 detected new block
[2014-05-25 22:29:34] Network diff set to 26
The conf file:
Quote
{
"pools" : [
{
"url" : "stratum+tcp://myre[Suspicious link removed]t2pools.com:6030",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
},
{
"url" : "stratum+tcp://doge.minep.it:3332",
"user" : "ordenadoresatm.gblade",
"pass" : "x"
},
{
"url" : "stratum+tcp://doge.ghash.io:3333",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"gridseed-options" : "baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0"
}
"pools" : [
{
"url" : "stratum+tcp://myre[Suspicious link removed]t2pools.com:6030",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
},
{
"url" : "stratum+tcp://doge.minep.it:3332",
"user" : "ordenadoresatm.gblade",
"pass" : "x"
},
{
"url" : "stratum+tcp://doge.ghash.io:3333",
"user" : "ordenadoresatm.gblade",
"pass" : "gblade"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "0",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"kernel-path" : "/usr/local/bin",
"gridseed-options" : "baud=115200,freq=800,chips=40,modules=1,usefifo=0,btc=0"
}
And the script calling cgminer:
Quote
/opt/miners/cgminer-gc3355/cgminer --usb 1:7,1:8,2:2,2:3 --config /etc/bamt/cgminerGblade.conf
Please, ant idea? If I buy a Raspberry Pi Would it work?
Thank you
Re: [GUIDE] GridSeed 5-Chip USB & Blade Miner Support/Tuning
Hi,
I received 2 Gblade yesterday. I have them connected to a Win 7 64 and they do not submit work. I tried with cgminer and Winusb drivers installed through zadig and everything seemed to work, Cgminer showed 10,4 Mhs but nothing was submitted.
Afterwards I tried what KaChingCoinDev suggested and again, nothing was submitted.
Any idea?
Thank you in advance
I received 2 Gblade yesterday. I have them connected to a Win 7 64 and they do not submit work. I tried with cgminer and Winusb drivers installed through zadig and everything seemed to work, Cgminer showed 10,4 Mhs but nothing was submitted.
Afterwards I tried what KaChingCoinDev suggested and again, nothing was submitted.
Any idea?
Thank you in advance
| cpuminer-gc3355 (v1.0e) - Started: [2014-05-23 23:55:10] ================================================================================ (2s) | 0.00/0.00 MH/s | A: 0 R: 0 HW: 0 Connected to myre[Suspicious link removed]t2pools.com:6030 diff 16 with stratum as user ordenadoresa ================================================================================ GSD 0: 48F0744E3135 | 850 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0 GSD 1: 48E570503135 | 850 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0 GSD 2: 48D778623137 | 850 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0 GSD 3: 48D452543137 | 850 MHz | 0.0/0.0 KH/s | A: 0 R: 0 H: 0 ================================================================================ [2014-05-24 00:03:08.2138] New Job_id: 3cef Diff: 16 Work_id: c59c436b [2014-05-24 00:03:08.2529] 0: Resetting GC3355 chips [2014-05-24 00:03:08.2841] 3: Resetting GC3355 chips [2014-05-24 00:03:08.3300] 1: Resetting GC3355 chips [2014-05-24 00:03:08.3544] 2: Resetting GC3355 chips [2014-05-24 00:03:08.4091] 0: Dispatching new work to GC3355 cores (0xc59c436b ) [2014-05-24 00:03:08.4541] 3: Dispatching new work to GC3355 cores (0xc59c436b ) [2014-05-24 00:03:08.4804] 1: Dispatching new work to GC3355 cores (0xc59c436b ) [2014-05-24 00:03:08.5332] 2: Dispatching new work to GC3355 cores (0xc59c436b ) |