Then what does this mean?

Output:
 [2014-08-25 07:25:14] Started cgminer 3.9.3
 [2014-08-25 07:25:14] Run Reset=1
 [2014-08-25 07:25:14] ST MCU hardware reset start
 [2014-08-25 07:25:22] SPI Speed 4000 kHz
 [2014-08-25 07:25:22] ST MCU - Enable (Pre-header)
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] ASIC Difficulty =  256
 [2014-08-25 07:25:22] AUTO GPIO CS
 [2014-08-25 07:25:22] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:28] Failure(cs0)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:28] ACK(cs0) timeout:cmd_RESET_BCAST-6.3550s
 [2014-08-25 07:25:28] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:34] Failure(cs1)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:34] ACK(cs1) timeout:cmd_RESET_BCAST-6.3528s
 [2014-08-25 07:25:34] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:40] Failure(cs2)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:40] ACK(cs2) timeout:cmd_RESET_BCAST-6.3738s
 [2014-08-25 07:25:40] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:46] Failure(cs3)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:46] ACK(cs3) timeout:cmd_RESET_BCAST-6.3050s
 [2014-08-25 07:25:46] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:52] Failure(cs4)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:52] ACK(cs4) timeout:cmd_RESET_BCAST-6.3107s
 [2014-08-25 07:25:52] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:58] Failure(cs5)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:58] ACK(cs5) timeout:cmd_RESET_BCAST-6.3273s
 [2014-08-25 07:25:58] No any A1 board

No any A1 board
: No such file or directory


"Other people have downloaded the last image and have had success." - really?  The last few pages of this thread explicitly state to revert back to the original image in order to fix it.  In fact, it appears that someone on your staff recommended that I revert to the original image (which also has the same issue/error message displayed above).

Please explain what that error message means so I can triage the issue.

Do you actually read these threads or just reply to random ones without any context?

I know the IP of my pi - that's not the issue.

Now please respond to a previous request for the original image that actually works instead of the one that your team gave me a few hours ago or the one that came with the miner.

A bit of a heads up - mine didn't have a number written on the case or the SD card which leads me to believe that I got someone else's miner after attempted to update the image and then RMAed it.

Do you mean reverted back to the original image??

  I'm sure there's a new person answering these questions but did you notice earlier in this thread that I asked for the original image because my box appears to have a newer image.


Unfortunately, it appears that an AMT_miner representative gave me this link: https://www.dropbox.com/s/4fhw6awwndsilky/amt_a1_0824v01.img.bz2?dl=0 which appears to be August 24.

Please provide a link to an original image if you want me to revert to an original image.

Thanks alfabitcoin - Note that I was following jorgebanilla during this thread (see below) but the problem is that it seems that my miner's image was "upgraded" when I received it. Without having access to the original image, it would be impossible to follow his instructions "I reverted back to to original image (not the one from dropbox but the one that came with it, which i have no root access to)"



AMT_Miners

Here's my information:
ip: 192.168.0.124
netmask: 255.255.255.0
gateway: 192.168.0.1 (this matches my network - i am able to ping us1.ghash.io)
DNS: tried both 8.8.8.8 and 208.67.222.222 per jorgebonilla
pool_0: stratum+tcp://us1.ghash.io:3333
account: .amt1
password: 123

Since it appears that it starts in silent mode, I used this command from /var/www
sudo ./cgminer -o stratum+tcp://uk1.ghash.io:3333 -u perogi.amt -p 5254152 --A1Pll1 950 --A1Pll2 950 --A1Pll3 950 --A1Pll4 950 --A1Pl                                                                                                                                                             l5 950 --diff 15 --api-listen --cs 8 --stmcu 0 --hwreset --api-allow W:127.0.0.1 --verbose

Output:
 [2014-08-25 07:25:14] Started cgminer 3.9.3
 [2014-08-25 07:25:14] Run Reset=1
 [2014-08-25 07:25:14] ST MCU hardware reset start
 [2014-08-25 07:25:22] SPI Speed 4000 kHz
 [2014-08-25 07:25:22] ST MCU - Enable (Pre-header)
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] A1 = 950,1
 [2014-08-25 07:25:22] A1 PLL Clock = 950MHz
 [2014-08-25 07:25:22] ASIC Difficulty =  256
 [2014-08-25 07:25:22] AUTO GPIO CS
 [2014-08-25 07:25:22] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:28] Failure(cs0)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:28] ACK(cs0) timeout:cmd_RESET_BCAST-6.3550s
 [2014-08-25 07:25:28] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:34] Failure(cs1)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:34] ACK(cs1) timeout:cmd_RESET_BCAST-6.3528s
 [2014-08-25 07:25:34] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:40] Failure(cs2)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:40] ACK(cs2) timeout:cmd_RESET_BCAST-6.3738s
 [2014-08-25 07:25:40] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:46] Failure(cs3)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:46] ACK(cs3) timeout:cmd_RESET_BCAST-6.3050s
 [2014-08-25 07:25:46] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:52] Failure(cs4)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:52] ACK(cs4) timeout:cmd_RESET_BCAST-6.3107s
 [2014-08-25 07:25:52] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000
 [2014-08-25 07:25:58] Failure(cs5)(20): missing ACK for cmd 0x04
 [2014-08-25 07:25:58] ACK(cs5) timeout:cmd_RESET_BCAST-6.3273s
 [2014-08-25 07:25:58] No any A1 board

No any A1 board
: No such file or directory

Thanks,
perogi.

EDIT: I also tried using
ip: 192.168.1.100
netmask: 255.255.255.0
gateway: 192.168.1.1 (added a router and used that to allow communication between 192.168.1.1 and 192.168.0.1)
DNS: tried both 8.8.8.8 and 208.67.222.222

Sadly this didn't help and I'm getting the same error.  Please note that the login/password for the linked image is: root/admin.  Do you have another image available?

Thank you!

Thank you!!! Can you direct me to the instructions on how to install this image?  Take care.

Thank you for the reply!  So it seems that I have the newest image (which doesn't work).  I understand your concern about providing me an extracted image - maybe someone else has one handy that they know works :-)

Thanks NaranKPatel but this IS the image that came with the miner :-(

The webpage UI is really minimal - would that mean that it's the original image?  I wonder if I got someone else's machine after they updated and returned it.

AMT_Miners:

Can you tell me what this error message means?

root@raspberrypi:/var/www# cat ./cgminer.log
 [2014-08-23 03:37:32] Started cgminer 3.9.3                   
 [2014-08-23 03:37:32] Run Reset=0                   
 [2014-08-23 03:37:32] SPI Speed 4000 kHz                   
 [2014-08-23 03:37:32] ST MCU - Disable                   
 [2014-08-23 03:37:32] ASIC Difficulty =  256                   
 [2014-08-23 03:37:32] GPIO CS is OFF                   
 [2014-08-23 03:37:32] SPI '/dev/spidev0.0': mode=1, bits=8, speed=4000000                   
 [2014-08-23 03:37:38] Failure(cs0)(20): missing ACK for cmd 0x04                   
 [2014-08-23 03:37:38] ACK(cs0) timeout:cmd_RESET_BCAST-6.2967s                   
 [2014-08-23 03:37:38] No any A1 board 

Thanks,
perogi

ssh where??

The killer is that I'm trying to figure out what's wrong with my machine and i have to read through dozens of "this guy is a scammer" (umm no shit) posts to get a nugget of helpful information :-/

opieum2 - seriously just ignore these douchebags and block them from the thread.  They are not adding anything to the discussion.  I appreciate the time and effort you are putting into this.

Thanks for the pics and the replies. 

It's very much appreciated!
perogi.

Can someone take a picture of the "ribbon cable" that's connected to their Pi for me so I can make sure that this one is connected correctly?

Thank you in advance!

What config changes did you make?  My system is stock and still getting the A1 error.

Do we install a newer version of cgminer and hope for the best?

Same issue here bud. :-/

Finally got in - but every time it tries to start cgminer, it fails with a segmentation fault. 

I installed bfgminer but it doesn't recognize the miners. 

Any help is appreciated!

Thanks,
perogi.