Hi phillipsmit13 and Rose Gold Prop

Could you please choose to allow "messages from newbies" under personal message options.  It is about LMS. 

Is it possible to auto confirm "Clean (Failed)" Miners after a Time Out or toggle the feature?

I get a pool connect issue with gminer on nicehash sometimes that results in failed miner status:
ExtraArgs "-l grin.log"
------------------------------------------------
02:21:09 Temperature: GPU0 70C GPU1 72C GPU2 72C GPU3 73C
02:21:09 Speed: GPU0 4.51 G/s GPU1 4.55 G/s GPU2 4.55 G/s GPU3 4.45 G/s
02:21:09 Accepted Shares: GPU0 27 GPU1 25 GPU2 22 GPU3 23
02:21:09 Rejected Shares: GPU0 0 GPU1 0 GPU2 0 GPU3 0
02:21:09 Fidelity: GPU0 0.942 GPU1 1.036 GPU2 0.976 GPU3 1.050
02:21:09 Total Speed: 18.06 G/s Fidelity: 1.001 Shares Accepted: 97 Rejected: 0
02:21:09 Uptime: 0d 01:19:01
02:21:36 Connection Error: Write timed out
02:21:39 Temperature: GPU0 71C GPU1 73C GPU2 72C GPU3 74C
02:21:39 Speed: GPU0 4.52 G/s GPU1 4.53 G/s GPU2 4.48 G/s GPU3 4.47 G/s
02:21:39 Accepted Shares: GPU0 27 GPU1 25 GPU2 22 GPU3 23
02:21:39 Rejected Shares: GPU0 0 GPU1 0 GPU2 0 GPU3 0
02:21:39 Fidelity: GPU0 0.944 GPU1 1.038 GPU2 0.984 GPU3 1.049
02:21:39 Total Speed: 18.00 G/s Fidelity: 1.004 Shares Accepted: 97 Rejected: 0
02:21:39 Uptime: 0d 01:19:31
02:21:51 Connect to grincuckaroo29.eu.nicehash.com:3371 Failed: Connection timed out
02:21:54 Stopped Mining on GPU0
02:21:54 Stopped Mining on GPU1
02:21:54 Stopped Mining on GPU2
02:21:54 Stopped Mining on GPU3
02:22:14 Connect to grincuckaroo29.eu.nicehash.com:3371 Failed: Connection timed out
02:22:14 All user mining pools are unavailable
------------------------------------------------------------------------

Also is there an option to Benchmark new miners without confirmation?

I get frequent restarts during periods, I have "restart on low hashrate" and high ASIC failures disabled.  In kernel Log:

Dec 13 03:00:53 (none) local0.err cgminer[20481]: low hashrate detection trigger: 13760.256000 Gh/s
Dec 13 03:00:53 (none) local0.notice cgminer[20481]: set voltage = 1308.407463  real:165 mv
Dec 13 03:00:54 (none) local0.notice cgminer[20481]: set_PIC16F1704_voltage_new ok, voltage = 0x9b
Dec 13 03:00:54 (none) local0.notice cgminer[20481]: set_PIC16F1704_voltage_new ok, voltage = 0x9b
Dec 13 03:00:55 (none) local0.notice cgminer[20481]: set_PIC16F1704_voltage_new ok, voltage = 0xe1
Dec 13 03:00:55 (none) local0.err cgminer[20481]: cgminer time error total_secs = 1513134055.437114 last_total_secs = 1.000000


"low hashrate detection trigger: 13760.256000 Gh/s"  <----  Does it force the trigger even though I have it disabled? Maybe it could be too sensitive as well.  Maybe the pool or rapid coin switching causing a temporary hash drop which triggers the restart too easily?

To keep the temps the same as the other batch d3's (80 degrees average during the day, 70 at night Silent Auto), 17.2 GHS average,  I have to run the latest batch d3 at "Default auto"

Fan speeds
Batch October/beginning November fans:
Daytime:   xxxx /3980 RPM  sound is concentrated on the inside of casing, less audible outside.  With stock firmware fans run at xxxx/4500+ RPM.
Nighttime: 2160/3210 RPM

Batch end November fans:
Daytime:   4xxx /5800 RPM  very loud, different sound than first model fans, like it's concentrated on the outside of the casing, sound is heard even at a distance.
Nighttime: 3090/4080 RPM


Thanks for the advice blissz, will definitely look into those fans as well, anything to help being able to live with these things lol.  I also bought some 6" inch and 12" Acoustic Ducting.  Plan to strap the 6 inch ducts to the fans and put the whole machine into the 12 inch duct as well and wire all the ends to separate windows to the outside with mesh over the openings (got some nice bug splatter already).

Thank you for the fan fix blissz, couldn't replicate the problem, but had a feeling it had to do with when there's a network interruption, much relieved it's fixed.  Had chips go to 114 degrees on one machine before I noticed and quickly intervened.  Error rate was higher than normal after that on that machine even after restarting, but after a short cooldown period they are working perfectly again, guess I dodged a bullet.

Also received my end Nov batch d3 and the fans on this model is of a poorer quality, different model, lower amp and much louder than the fans on other batches, a shame since my other d3's were all much quieter with the custom firmware and now the new machine just tops out the overall noise level again.

Hi blissz,  firmware made a big difference to my temps and the noise reduction is God sent thank you, but then at random one of my d3's was overheating 100 degrees+.   I noticed the fan speed being around 2000rpm instead of 3800-4500rpm.

I flashed official bitmain firmware on that machine then few hours later one of the other d3's did the same after a network interruption and coming back online again that machine also stuck at around 2000rpm resulting in 100 degrees+ and super high hardware errors.  

Please look into this issue as the firmware really makes a difference, but is not worth the risk if the fan gets stuck at 2000rpm.  The red light on the machine flashes instead of the green when this happens.

Rebooting fixes the stuck 2000rpm fan issue temporarily.  It will happen on any of the fan profiles as well as when I set a custom fan speed of 50%.  It seems it might have something to do with when the fan speeds are suppose to spin up loud at startup, since it's quiet at startup now I think it gets stuck there and never ramps up again to the desired fanspeed but stays stuck at that 2000rpm mark.  

Havs anyone else encountered this?
https://imgur.com/a/x4v4G

Adding a APW3++ psu to the cart(with or without L3+) makes it so there is no payment option on checkout, is it just me?  Is there no way to order a psu with an antminer?

When mine hangs now and then it's with bitcore so far, and I think one of my 4 GTX1060 3GB's crashes hours before the miner hangs, been experimenting with lower clocks and miner gets less stuck now.

Maybe it can be made so it doesn't have to close and open clamore-eth miner every time when pool changes from one ethash coin to another and only open a new miner if the algo is different eg. Ethash coin to Equihash coin.

I've had the cmd window go stuck 3 more times like this, nothing after ...terminating workio thread, need to close the cmd window and run NemosMiner again, about every second morning when I wake up it's stuck.  Am I the only one this happens to?  Any way I can circumvent this?

[2017-05-23 04:00:16] bitcore block 4319, diff 561.238
[2017-05-23 04:01:16] GPU #1: Zotac GTX 1060 3GB, 8460.15 kH/s
[2017-05-23 04:01:16] GPU #1: 1609 MHz 136.46 kH/W 62W 58C FAN 64%
[2017-05-23 04:01:40] accepted: 562/570 (diff 0.467), 35.51 MH/s yes!
[2017-05-23 04:02:00] Stratum connection interrupted
[2017-05-23 04:02:01] ...terminating workio thread

Is it possible to add a job to hub workers that excludes eth and etc for mining with HD7970 cards that get low hash due to 3gb vram limit and dag?

Yes hanging and no mining after after:

[2017-05-06 20:54:32] Stratum connection interrupted
[2017-05-06 20:54:33] ...terminating workio thread

, but so far it hasn't done it again.  I was thinking maybe my internet connection got interrupted for a while and doesn't auto reconnect and after testing this by purposely interrupting my internet it actually reconnected fine and continued mining after showing:

[2017-05-07 16:41:21] Stratum connection interrupted
[2017-05-07 16:41:33] Stratum connection failed: Could not resolve host: blake2s
.mine.zpool.ca
[2017-05-07 16:41:33] ...terminating workio thread
*** ccminer alexis-1.0 for nVidia GPUs from alexis78@github ***

so not sure what made the them hang the other two times without retrying.  If it does happen again I'll just check if it's always the same place.

Started getting this problem since yesterday, this is the second time.  Not sure if it's just timetravel, but real problem lies with "Stratum connection interrupted" and then it just sits there until I restart the miner.  Is there a way to let it auto restart when connection interrupted happens?

[2017-05-06 20:54:16] timetravel block 424001, diff 44.802
[2017-05-06 20:54:18] GPU #3: Zotac GTX 1060 3GB, 7803.57 kH/s
[2017-05-06 20:54:18] accepted: 888/907 (diff 0.139), 43.81 MH/s yes!
[2017-05-06 20:54:25] GPU #2: Zotac GTX 1060 3GB, 8332.58 kH/s
[2017-05-06 20:54:26] accepted: 889/908 (diff 0.206), 43.77 MH/s yes!
[2017-05-06 20:54:32] Stratum connection interrupted
[2017-05-06 20:54:33] ...terminating workio thread

Switching works without issues so far, very nice, 2.8.1 update did the trick.  Why is profitability between Minerstat.com, Whattominer.com(using current revenue and diff) and miningpoolhub.com so different from each other most of the time? 

I find that it switches perfectly from "claymore-zec" to "claymore-eth", when say EXP becomes more profitable than ZCL, but it never switches (back) from "claymore-eth" to "claymore-zec" when say ZCL becomes more profitable than EXP.

and

are also set.


Will this include switching between "ewbf-zec" and "claymore-eth"?

02:00:08:453   6f2c   Remote management: file reboot.bat was downloaded
02:00:09:887   397c   ETH: 04/14/17-02:00:09 - New job from europe.ethash-
hub.miningpoolhub.com:17020
02:00:09:888   397c   ETH - Total Speed: 53.104 Mh/s, Total Shares: 19, Rejected: 0, Time: 00:22
02:00:09:888   397c   ETH: GPU0 26.859 Mh/s, GPU1 26.244 Mh/s
02:00:09:889   397c    DCR - Total Speed: 1593.105 Mh/s, Total Shares: 123, Rejected: 1
02:00:09:889   397c    DCR: GPU0 805.781 Mh/s, GPU1 787.324 Mh/s
02:00:10:232   406c   Remote management: file reboot.bat was uploaded
02:00:13:363   689c   Remote management required restart
02:00:13:364   689c   Rebooting
==================reboot.bat========================
"C:\guiminer-scrypt_win32_binaries_v0.04\cgminer\Claymore-4.1\EthDcrMiner64.exe" -epool stratum

+tcp://daggerhashimoto.hk.nicehash.com:3353 -ewal 1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M -epsw x -

esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal

1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M -dpsw x
==================================================
02:00:16:038   4be0   args: -epool stratum+tcp://daggerhashimoto.hk.nicehash.com:3353 -ewal 1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal 1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M -dpsw x
02:00:16:039   4be0   
02:00:16:039   4be0   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
02:00:16:039   4be0   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0      º
02:00:16:039   4be0   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
02:00:16:040   4be0   
02:00:16:240   4be0   ETH: 2 pools are specified
02:00:16:241   4be0   Main Ethereum pool is daggerhashimoto.hk.nicehash.com:3353
02:00:16:241   4be0   DCR: 4 pools are specified
02:00:16:241   4be0   Main Decred pool is decred.eu.nicehash.com:3354

Hi, yes both of them are exactly the same Powercolor Red Devil RX480's, the crossfire option was always missing. I saved their own bios's modded them individually with memory straps from 1650 (1500 causes color pixels on screen) and re flashed and still no crossfire available.  Re flashed to default bios still no crossfire.  What I still want to try is re flash to default bios again uninstall and install driver without using  atikmdag-patcher.exe.  Just hoped someone might know for sure if it's because of either using a custom bios or the patcher before I go through all the trouble again.

Can anyone say if modding the bios (to copy memory straps) breaks crossfire? I dont have a crossfire option to enable crossfire in Radeon settings no matter the driver version?

My ethmining is being hijacked.

Ok so this morning after waking up one of my rigs was mining on nicehash, but I was mining on miningpoolhub and didn't specify a failover.  In my logs I discovered reboot.bat file was uploaded through ethman.exe and ran remotely.

I reckon that's why Claymore said in his readme:
"Warning: use negative option value or disable remote management entirely if you think that you can be attacked via this port!"

I had it on a positive number in order to manage, but how did a hacker get access over the internet to manage my miner. I consider myself paranoid careful and usually take all precautions.  Is this a mistake on my side or is it just that easy to access someone's EthDcrMiner64 remotely? Does this mean files might be compromised or is it more like someone has my external IP, will a vpn make a difference? Any advice is appreciated.

I replaced my Claymore folder with a new one and made most files inside read-only, but how do I know I am not still compromised, how much access does this hacker have now and what should I do to ensure further safety?  As you can see inside the reboot.bat file the hacker's bitcoin address: "1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M" is busy stealing quite a nice sum of equihash at the moment.

02:00:08:453   6f2c   Remote management: file reboot.bat was downloaded
02:00:08:454   6f2c   srv bs: 0
02:00:08:454   6f2c   sent: 40
02:00:09:231   17d8   GPU0 t=79C fan=32%, GPU1 t=79C fan=31%
xxxxxxxxx
xxxxxxxxx
xxxxxxxxx
02:00:09:887   397c   ETH: 04/14/17-02:00:09 - New job from europe.ethash-
hub.miningpoolhub.com:17020
02:00:09:887   397c   target: 0x0000000112e0be82 (diff: 4000MH), epoch #117
02:00:09:888   397c   ETH - Total Speed: 53.104 Mh/s, Total Shares: 19, Rejected: 0, Time:

00:22
02:00:09:888   397c   ETH: GPU0 26.859 Mh/s, GPU1 26.244 Mh/s
02:00:09:889   397c    DCR - Total Speed: 1593.105 Mh/s, Total Shares: 123, Rejected: 1
02:00:09:889   397c    DCR: GPU0 805.781 Mh/s, GPU1 787.324 Mh/s
02:00:10:231   406c   recv: 73
02:00:10:232   406c   srv pck: 73
02:00:10:232   406c   Remote management: file reboot.bat was uploaded
02:00:10:232   406c   srv bs: 0
02:00:10:233   406c   sent: 682
02:00:10:604   7608   recv: 51
xxxxxxxxxx
02:00:13:363   689c   Remote management required restart
02:00:13:364   689c   Rebooting
02:00:13:377   4630   srv bs: 0
02:00:13:377   4630   sent: 210

==================reboot.bat========================
"C:\guiminer-scrypt_win32_binaries_v0.04\cgminer\Claymore-4.1\EthDcrMiner64.exe" -epool stratum

+tcp://daggerhashimoto.hk.nicehash.com:3353 -ewal 1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M -epsw x -

esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal

1D8J2tkRbt5R7TNZKdBYdq8qx2aJDFqU1M -dpsw x

Thank you, love this   One more thing, last night I disabled Autosell settings on Zec "Enable >>" blue text to white text and this morning my Zec was sold anyway, awesome feature though and mostly I want to autosell was just for testing so you might also look into that.